Highly substituted poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives having bulky phenyl and fluorenyl pendant groups: Synthesis,characterization, and electro‐optical properties

Two series of poly(2,3‐diphenyl‐1,4‐phenylenevinylene) (DP‐PPV) derivatives containing multiple bulky substituents were synthesized. In the first series, two different groups were incorporated on C‐5,6 positions of the phenylene moiety to increase steric hindrance and to obtain blue‐shifted emissions. In the second series, bulky fluorenyl groups with two hexyl chains on the C‐9 position were introduced on two phenyl pendants to increase the solubility as well as steric hindrance to prevent close packing of the main chain. Polymers with high molecular weights and fine‐tuned electro‐optical properties were obtained by controlling the feed ratio of different monomers during polymerization. The maximum photoluminescent emissions of the thin films are located between 384 and 541 nm. Cyclic voltammetric analysis reveals that the band gaps of these light‐emitting materials are in the range from 2.4 to 3.3 eV. A double‐layer EL device with the configuration of ITO/PEDOT/P4/Ca/Al emitted pure green light with CIE′1931 at (0.24, 0.5). Using copolymer P6 as the emissive layer, the maximum luminescence and current efficiency were both improved when compared with the homopolymer P4. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6738–6749, 2006     

Vinyl copolymers containing pendant 1,4‐distyrylbenzene and 1,3,4‐oxadiazole chromophores: Preparation and optoelectronic properties

We prepared two vinyl copolymers P1 and P2 containing pendant distyrylbenzene and aromatic 1,3,4‐oxadiazole derivatives, respectively, from their precursor poly(styrene‐ran‐4‐vinylbenzyl chloride) (M_w = 11,400, PDI = 1.18), which had been prepared by the controlled radical polymerization (RAFT). Two main chain polymers containing similar isolated distyrylbenzene ( P3) and aromatic 1,3,4‐oxadiazole ( P4 ) chromophores were also synthesized for comparative study. The resulted copolymers ( P1 – P4 ) are soluble in common organic solvents and are basically amorphous materials with 5% weight‐loss temperature higher than 360 °C. The PL spectral results reveal that the architecture of P1 prevents the formation of inter‐ or intramolecular interaction. The HOMO and LUMO levels of P2 , estimated from cyclic voltammetric data, are ?5.96 and ?3.81 eV, respectively, which are much lower than those of P1 (?5.12 and ?3.11 eV). The emission of blend from P1 and P2 are contributed mainly from distyrylbenzene fluorophore (～450 nm) owing to efficient energy transfer. Moreover, the blend exhibits three kinds of redox behavior depending on their weight ratios. The luminance and current efficiency of the EL device lpar;ITO/PEDOT/ MEH ‐ PPV + P2 /Al) are 503 cd/m² and 0.11 cd/A, which can be improved to 1285 cd/m² and 0.44 cd/A, respectively, as the weight ratio of P2 increases from 0 to 20%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5362–5377, 2006     

Comparison of the sensitivity of 11 crosslinked hyaluronic acid gels to bovine testis hyaluronidase

Crosslinked hyaluronan gels are used in various applications where their stability is a prerequisite. The sensitivity of such gels to hyaluronidase can be determined as an index of stability by several approaches: chromatography, electrophoresis, and viscometry. We describe here a test based on the colorimetric determination of the N-acetyl-d-glucosamine released by hyaluronidase in standardized conditions. The sensitivities to bovine testicular hyaluronidase of 11 different gels used to fill skin wrinkles (Restylane; Perlane; Juvéderm 18, 24, 24HV, 30, and 30HV; Surgiderm 18, 24XP, 30, and 30XP) were compared.The method was reproducible, easy to perform, not time-consuming and allowed us to demonstrate that the sensitivity to testicular hyaluronidase was dependent on the degree of crosslinking of the gels and also on their monophasic/biphasic nature. Under our conditions, Surgiderm 30, 24XP and 30XP were the most resistant gels.We propose to retain the hyaluronidase test to predict the in situ stability of a crosslinked gel used to fill skin wrinkles.     

电子碰撞诱导原子从低激态向高激态弛豫

本文根据空心阴极放电中电子能量分布的物理图象,分析了原子从低激态向高激态弛豫的可能途径。建立高低激态集居数密度增量的关系。讨论高激态集居数密度增量获得可观量的条件。根据此条件分别选取钠原子的基态3s~2S_(1/2)和铜原子的亚稳态4s~2D_(3/2)为与激光共振的下能级,并激发具有较大自发发射几率的3s~2S_(1/2)→3p~2P°_(1/2)(和3p~2P°_(3/2))和4s~2D_(3/2)→4p~2P°_(1/2)跃迁,在远离上能级的高激态上观测到敏化荧光,并精确测得这些态的自发发射系数比值,而在更高激态上没有观测到敏化荧光,表明讨论中提出的条件是合理的。     

The response of microstructure to processing in a series of poly(siloxaneimide) copolymers

Poly(siloxaneimide) (PSI) segmented copolymers exhibit organized microdomains if the blocks are sufficiently incompatible. As with neat diblock and triblock copolymers, the processing route employed to prepare films of PSI materials is expected to influence the dimensions and/or morphology of the resultant microstructure. In this work, small-angle neutron scattering (SANS) is utilized to characterize the disordered microstructure found in films of a series of PSI copolymers which are subjected to solvent casting and various thermal treatments. Microstructural dimensions such as the periodicity and correlation length are deduced from the Teubner-Strey (TS) model for disordered microemulsions. The scattering intensity of each copolymer up to q = 5.0 nm^?1, where q is the scattering vector, is found to scale as q^?2.8+?0.1. Results indicate that processing the materials as cast films or as melt-pressed films allowed to cool slowly has a small, but discernible, effect on microstructural characteristics. SANS profiles of films quenched from elevated temperatures reveal a clear transition in microdomain periodicity, which correlates well with the glass transition temperature of the imide microphase in these and other materials of similar chemical structure. © 1993 John Wiley & Sons, Inc.     

砷化镓材料中EPR“As_(Ga)”的退火行为

本文比较了中子辐照。压缩变形和原生LEC砷化镓等三种不同来源样品的EPR“As_(Ga)”的Hamiltonian参数。并系统地研究了EPR“As_(Ga)”的浓度和低温光猝灭行为随退火温度的变化,从而进一步验证了EPR“As_(Ga)”的本性,即除孤立As_(Ga)反位原子外,还可能包括As_(Ga)的一些空位络合物。这些不同本性的EPR“As_(Ga)”缺陷及其它有关的缺陷在样品热处理过程中可能相互转化。按照物理化学中Le Chatlier原理,缺陷的原始浓度和晶体内部应变能似应是引起这些转化反应的重要因素。     

Continuity properties of the normal cone to the level sets of a quasiconvex function

Two main properties of the subgradient mapping of convex functions are transposed for quasiconvex ones. The continuity of the functionxf(x)^–1f(x) on the domain where it is defined is deduced from some continuity properties of the normal coneN to the level sets of the quasiconvex functionf. We also prove that, under a pseudoconvexity-type condition, the normal coneN(x) to the set {x:f(x)f(x)} can be expressed as the convex hull of the limits of type {N(x _n)}, where {x _n} is a sequence converging tox and contained in a dense subsetD. In particular, whenf is pseudoconvex,D can be taken equal to the set of points wheref is differentiable.This research was completed while the second author was on a sabbatical leave at the University of Montreal and was supported by a NSERC grant. It has its origin in the doctoral thesis of the first author (Ref. 1), prepared under the direction of the second author.The authors are grateful to an anonymous referee and C. Zalinescu for their helpful remarks on a previous version of this paper.     

在H－ZSM－5沸石上甲醇转化为汽油的初始产物分布

在Ｈ－ＺＳＭ－５沸石上甲醇转化为汽油的初始产物分布姜玄珍（浙江大学化学系，杭州３１００２７）Ｒ．Ｆ．Ｈｏｗｅ（新南威尔士大学物理化学系，澳大利亚）关键词Ｈ－ＺＳＭ－５沸石，甲醇转化汽油，产物分布以氢型ＺＳＭ－５沸石作催化剂转化甲醇为汽油（ＭＴＧ），在...     

热活化延迟荧光聚合物及其电致发光器件

热活化延迟荧光(TADF)聚合物,不仅具有小分子TADF材料高的激子利用效率特性,而且还具备分子多样性好、可溶液加工、低成本、以及易实现大面积柔性器件等诸多优势,在近几年受到广泛的关注并展现了良好的应用前景。本文从TADF聚合物分子设计原理、器件结构及发光机理出发,依据TADF聚合物的构筑方法不同,概括了其结构设计策略,详述了各种类型TADF聚合物的分子结构和光电性能及其在有机电致发光器件领域应用的研究进展,最后探讨了TADF聚合物存在的问题,并展望了其发展前景。     

催化荧光法测定痕量铜的研究

本文拟定了一个催化荧光法测定痕量铜的新方法,确定了该催化反应的速度方程式和反应级数。方法检测限达0.1ng Cu/ml,相对标准偏差为3.7％,具有较好的选择性,可不经分离直接用于头发样品中铜的测定,回收及对照实验结果令人满意。