Recovering high dynamic range by Multi-Exposure Retinex

The matter of generating high dynamic range (HDR) image from a number of differently exposed pictures arises to satisfy the needs of high-quality imaging and industrial applications. A number of HDR image generation algorithms have been proposed in the past. However, the HDR radiance map recovered by these classical methods cannot completely exclude the noisy pixels in the input images and thus are unable to produce the optimal result with highest possible SNR. In this paper we are going to introduce a new HDR generation algorithm based on the Multi-Exposure Retinex model deduced in this paper for HDR image composition. The luminance component L and the reflectance R are synthesized independently before being combined together. A novel R image composition method is introduced to help the composed result image reach the highest possible SNR. The method is tested on grey-level images in this paper, but it can be easily extended to the color-image version.     

LEO卫星网络基于动态位置区的寻呼策略

针对LEO卫星网络中具有自主定位能力的用户终端,采用基于地理位置的动态位置区划分方案,根据用户移动速度设置位置区的大小。在动态位置区的基础上,对高速移动用户提出了一种基于时延限制的分组寻呼策略。仿真结果表明,对于低速移动用户,二次寻呼策略的时延和开销性能最佳;对于高速移动用户,基于时延限制的分组寻呼策略最佳。     

极小化互信息的独立分量分析方法应用于多用户检测

论文针对直接序列扩频码分多址（DS-CDMA）通信系统的远近效应,提出了一种将极小化互信息的独立分量分析（MMI—ICA）应用于多用户检测的方法。这种盲多用户检测方法能够有效地抑制远近效应,并能够成功地检测出期望用户信号。仿真结果表明,该算法的抗远近效应能力相对传统的匹配接收机有很大的提高,并能够有效地抑制多址干扰。     

基于电力线载波低压电缆防盗方案

电力电缆被盗对电力系统造成了严重的安全威胁和财产损失。本文设计了一套基于电力线载波通信的电缆防盗报警方案。载波通信通过扩频调制解调电路来实现。防盗报警系统由报警主站和线路探测终端组成,报警主站根据与各线路探测终端的载波通信成败或者所接收的终端状态信息数据来判断是否发生电力电缆被盗等异常信息,当异常状态出现时,报警主站通过GSM网络拨打电话和短信息发送向远端值班室人员传送警情。同时本文介绍了如何克服电力线上的噪声对载波的干扰,以及如何对断点进行定位的方案。     

D2-FBGA热循环载荷下的结构参数优化

利用动态机械分析仪(DMA),测定环氧模塑封材料(EMC)的粘弹性数据;经过数据拟合处理,得到有限元仿真所需的相关参数.将D2-FBGA中芯片厚度、粘结剂厚度、部分EMC厚度及基板厚度作为优化参数,选用正交实验设计,建立了这四个参数的正交表;并用MSC、 Marc,计算了D2-FBGA在热循环载荷下的热应力分布.通过统计软件stata,建立了最大等效应力与上述参数的关系的回归方程;分析了各个结构参数对器件最大等效应力的影响程度;使用单纯形法,得出一组最优结构参数及对应的最大等效应力值.结果表明:通过优化,器件的最大等效应力从(90.58 MPa)下降到66.84 MPa,优化效果明显.     

Estimation of thermal parameters of the enclosed electronic package system by using dynamic thermal response

A methodology for modeling and simulating the electro-thermal behavior of an enclosed electronic package is presented and validated. The electro-thermal model is constructed using system dynamics. The system model, in which the electrical and the thermal domain are combined, is presented. The developed model describes the dynamic thermal behavior system that was an electronic device in the test enclosure. An effective way to identify the thermal parameters of the system, especially the thermal contact resistance, is suggested. In detail, the new method for thermal resistance identification is based on the temperature difference behavior between the component and the air temperature inside the enclosure. Based on the proposed model, either the variation of the heat source or the ambient temperature can be estimated. Simulated results were in good agreement with the measured temperature in the transient state accompanying with the variation of the environment.     

GSM BSS系统的Gb Flex

从介绍Gb Flex特性入手,详细阐述了BVC流控制、GboIP的动态配置方案和网络连接拓扑,并提出了采用加权公平算法选取SGSN的方案。     

宽带无线接入（BWA）技术研究

分析了宽带无线接入（BWA）技术的产生背景,提出了BWA的通用参考模型,并对BWA进行了分类,最后阐述了BWA的应用领域。     

基于脉宽调制的D类放大器信号分析与仿真

D类放大器一般采用脉宽调制的方式实现,其实质是一个PWM波的调制解调问题。文章通过对PWM信号的频谱分析,揭示出D类放大器的实现原理。文章还采用MATLAB软件平台,对PWM波的频谱进行了仿真,给出了仿真结果,直观地验证了理论分析的结论。     

基于瘦AP架构实现WAPI

本文首先介绍了WAPI安全标准的产生背景、技术原理,然后从WAPI应用实施的角度,介绍了华三通信技术有限公司(以下简称H3C)基于瘦AP架构的WAPI解决方案。