矩形窗正交时频空检测算法

针对正交时频空(Orthogonal Time Frequency Space, OTFS)调制系统采用矩形窗函数时,信道矩阵结构复杂导致的鲁棒性差的问题,提出了一种基于时域处理和酉近似消息传递的检测算法。该算法首先添加循环前缀,将时域信道转换为分块对角矩阵;然后应用酉变换和近似消息传递建立迭代检测算法。仿真结果表明,所提检测算法能够在不增加复杂度的条件下有效提升检测精度和鲁棒性,特别是存在信道编码的条件下表现出2 dB的性能增益,使得该算法更适用于杂散多径、高速移动等环境,具有较高的应用价值。     

智能反射面辅助广义空间调制性能分析

将智能反射面（Intelligent Reflecting Surface,IRS）技术引入索引调制（Index Modulation,IM）技术领域,可在保留各自优势的同时提高系统可靠性并实现高频谱效率。但现有方案在每时隙内仅激活一根天线,使得天线的利用率降低,且单天线激活时若想要进一步提高系统传输速率只能成倍增大发射天线数或提高调制阶数,从而影响系统性能。针对这一问题,提出了IRS辅助广义空间调制（Generalized Spatial Modulation,GSM）相关技术的方案,在发射端激活多根天线,使得在单位时间内相同天线数时每时隙传输的比特数增加。计算了该方案理论误码率上界,通过仿真验证了理论推导的正确性。     

基于误码率的软件无线电射频干扰效应分析

针对通信系统工作过程中受到外界电磁干扰而无法通信的问题,研究了基于软件无线电的电磁干扰效应及误码特征。通过分析典型软件无线电电磁信号传输特性及其信息链路电磁干扰耦合路径,设计了软件无线电通信干扰实验系统。该系统利用Simulink软件观测、记录通信信号眼图、星座图信息等受扰特征,并通过分析接收信号的误码率,给出了不同干扰信号对通信系统的影响规律：当同频干扰功率达到-40 dBm时通信开始出现误码,干扰功率每增加5 dB,误码率增加一个量级,干扰功率增加到-18 dBm时,误码率达到阈值0.25;邻频干扰误码率随干扰功率变化趋势与同频干扰一致,但出现误码的最小干扰功率更大;带外强干扰信号也会影响通信系统可靠性,在相同误码率情况下,需要更大的干扰信号功率且大小与信号频偏成正比。     

一种信号调制识别网络的轻量化设计

神经网络在信号调制识别领域得到了广泛关注和研究。针对现有调制识别算法为提高识别准确率,导致模型尺寸过大、计算时间过长的问题,提出了一种调制识别神经网络的轻量化设计方案。该方案由信号失真校正模块和分类模块两部分组成。其中,信号失真校正模块通过参数估计器提取相位偏移信息,再经参数转换器对相位偏移进行参数校正,保证信号识别精度;分类模块由一维卷积神经网络(One-Dimensional Convolutional Neural Network, 1D-CNN)、选通递归单元(Gated Recurrent Unit, GRU)和高斯衰减层构成,从时间和空间的角度有效提取信号特征,并减少冗余参数量以缩减模型大小。仿真结果表明,所提方案与同精度网络相比,平均识别准确率提升0.21%,计算时间缩减到1/3.4,模型尺寸缩减到1/7.77。     

基于引导调制的彩色点云无参考质量评价方法

彩色点云(color point cloud, CPC)作为三维场景和对象的有效描述形式,在虚拟现实、增强现实等许多领域得到重要应用。CPC在其采集、压缩、传输、重建等过程中会引入相应的失真,需要设计有效的评价方法对失真CPC质量进行评测。本文提出一种基于引导调制的CPC无参考质量评价方法。考虑到几何信息与彩色纹理信息的联合失真,利用引导调制的方法联立两者,以综合考虑几何失真、彩色纹理失真、联合失真。结合人眼的多通道性,利用剪切波变换提取特征。最后,将所有特征构成的特征向量输入到支持向量回归模型(support vector regression, SVR)学习预测点云质量。实验结果表明,所提出的方法与人类主观感知具有很好的一致性。     

Ultrafast Switchable Passive Radiative Cooling Smart Windows with Synergistic Optical Modulation

Switchable passive radiative cooling (PRC) smart windows can modulate sunlight transmission and spontaneously emit heat to outer space through atmospheric transparent window, presenting great potential in building energy conservation. However, realizing stable and on-demand control of the cooling efficiency for PRC materials is still challenging. Herein, an electro-controlled polymer-dispersed liquid crystal (PDLC) smart window showing PRC property is designed and prepared by adding mid-infrared emitting reactive monomers into the conventional PDLC matrix. It is found that not only the electro-optical properties but also the PRC efficiency of PRC PDLC film are tunable by regulating the content of the mid-infrared emitting components, film thickness, and micromorphology. This advanced PRC PDLC material achieves a near/sub-ambient temperature when the solar irradiance is below 400 W m⁻² and can dynamically manage daytime cooling efficiency. Importantly, its PRC efficiency is capable of being tuned in an on-demand and ultrafast millisecond-scale way, whose controllable transparency enables multistage heat regulation. This study is hoped to provide new inspiration in the preparation of advanced optical devices and energy-efficient equipment.     

Local Electronic Structure Modulation Enables Fast-Charging Capability for Li-Rich Mn-Based Oxides Cathodes With Reversible Anionic Redox Activity

Anionic and cationic redox chemistries boost ultrahigh specific capacities of Li-rich Mn-based oxides cathodes (LRMO). However, irreversible oxygen evolution and sluggish kinetics result in continuous capacity decay and poor rate performance, restricting the commercial fast-charging cathodes application for lithium ion batteries. Herein, the local electronic structure of LRMO is appropriately modulated to alleviate oxygen release, enhance anionic redox reversibility, and facilitate Li⁺ diffusion via facile surface defect engineering. Concretely, oxygen vacancies integrated on the surface of LRMO reduce the density of states of O 2p band and trigger much delocalized electrons to distribute around the transition metal, resulting in less oxygen release, enhancing reversible anionic redox and the MnO₆ octahedral distortion. Besides, partially reduced Mn and lattice vacancies synchronously stimulate the electrochemical activity and boost the electronic conductivity, Li⁺ diffusion rate, and fast charge transfer. Therefore, the modified LRMO exhibits enhanced cyclic stability and fast-charging capability: a high discharging capacity of 212.6 mAh·g⁻¹ with 86.98% capacity retention after 100 cycles at 1 C is obtained and to charge to its 80%, SOC is shortened to 9.4 min at 5 C charging rate. This work will draw attention to boosting the fast-charging capability of LRMO via the local electronic structure modulation.     

Improved aquila optimization-based parameter evaluation framework and meta-heuristic algorithm in radio-over-fiber SpatialMux multi-input multi-output long-term evolution system

In heterogeneous access network, Multiple-Input Multiple-Output (MIMO) radio-over-fiber (RoF) system is an efficient approach for multiple signal transmission with low cost and complexity. The performance of RoF fronthaul system in MIMO system will be varied with different nonlinear effects. By adjusting various transmission parameters, such as the input signal power or the laser bias current, the nonlinear impacts produced by the RoF system can be reduced. In this paper, a novel algorithm Improved Aquila Optimization (IAO) is proposed to optimize transmission circumstances of MIMO RoF system. It determines the appropriate bias current for both lasers and Radio Frequency (RF) signal power in a short period. The input signals are wavelength multiplexed with Intensity Modulation and Direct Detection (IM/DD) applied. The carrier as well as transmission frequency is governed by the MIMO-Long-Term Evolution (LTE) standard. The proposed system is implemented in MATLAB, and the performance is evaluated. The experimental results show that fast convergence and trade-off between noise and nonlinearity are obtained with varying bandwidth. In the experimental scenario, the maximum Error Vector Magnitude (EVM) of 1.88, 3.14, and signal-to-noise ratio (SNR) of 3.204, and 2.698 was attained for both quadrature phase shift keying (QPSK) and quadrature amplitude modulation (QAM) modulation. [Correction added on 24 April 2023, after first online publication: the SNR values were corrected in the preceding sentence.] For 100 iterations, the processing time was reduced to 0.137 s. When compared with the conventional state-of-the-art approaches, the accuracy and computational complexity of the proposed approach are improved.     

Design of high-speed data transfer turbo code for body channel communication transceivers

In this work, a digital differential transmitter based on low-power wireless compensation transceiver for body channel communication (BCC) is proposed. Further, the proposed transceiver is composed of Touch Status Detection Unit (TSDU), Wireless Status Compensation Unit (WSCU), and a reconfigurable preamplifier. Initially, the human body channel environment for wireless communication is investigated based on properties from 1 to 100 MHz. Further, the turbo code-based encoding scheme is used to encode the data before transferring the data on the transmitter side. Also, the proposed error-correcting parallel turbo decoder using a modified step-by-step algorithm is presented. The turbo code-based decoding scheme is used to recover the error-free transmitted data at the receiver side. Results demonstrate that the proposed BCC transceiver is designed using 90 nm CMOS technology and it is observed that the proposed BCC transceiver has utilized an area of 600mm². Also, the maximum data rate achieved by a proposed BCC transceiver was 100 Mbps, and the overall transceiver power consumption is 0.42 mW, and energy for communication is 0.02 nj/b.     

SVPWM教学研究之重点解析

SVPWM是电力电子技术教学中的重要内容,本文对空间矢量调制的教学重点做了一个较为全面系统的梳理。重点阐述SVPWM的核心思想,特别是三相正弦交流电SVPWM的基本原理,严格证明了三相电压的空间矢量相等与线电压相等等价。同时,证明在SVPWM下,逆变器输出的最大圆为基本空间矢量构成的正六边形的内接圆、直流母线电压利用率提高了约15.4%。