G参数诊断准则的理性分析

本文研究一种模拟电路故障诊断经典方法（即Ｇ参数诊断法）的正确性和合理性，研究表明：（１）估计Ｇ参数的数学模型是错误的；（２）由错误模型所得的Ｇ参数估计集和定是真实Ｇ参数集的有偏估计；（３）假如不满足严格的约束条件；Ｇ参数诊断法将给出错误的诊断结论，本文还给出了Ｇ准则能否正确诊断的预报公式，该公式很容易由电路标称数据计算。     

一种有效的增益误差校准方法

本文针对增益误差对空间谱估计性能的影响，提出了一种基于算术平均值的平滑校准方法，并将它与其它核准方法进行了比较，理论分析和实验仿真均表明了本文提出的方法具有更好的稳健性能和校准效果。     

太赫兹CSAR运动目标距离速度估计与重定位方法

圆周合成孔径雷达(CSAR)中,由于雷达平台绕观测场景圆周飞行,雷达和地面目标之间的距离方程复杂,目标的距离向参数和方位参数之间有复杂的耦合关系,导致单独估计动目标距离向速度参数的难度加大。提出一种基于子孔径分解的太赫兹CSAR运动目标距离向速度估计方法,选择合适的子孔径角度,对CSAR进行子孔径分解,在子孔径条件下,通过小角度近似,可以实现运动目标距离向速度和其他参数间的解耦合,准确估计运动目标的距离向速度,实现运动目标的精确重定位。仿真和实测数据验证了该算法的有效性。     

用于太赫兹通信的双向全并行相位估计算法

在太赫兹通信的超宽带应用场景下,太赫兹载波是通过多次倍频实现,因而导致相噪严重恶化。基于太赫兹频率下的多极/零相位噪声模型,在传统的盲相位估计算法的基础上,提出了一种全并行化的相位估计算法。该算法通过在每个并行数据中插入导频,将导频相噪信息作为初始相位对并行数据进行相位扩展及旋转鉴相。借鉴传统盲相位估计算法的最佳相位估计值的判决选择思路,同时利用前一时刻导频和当前时刻导频,对当前并行数据从前后两个方向进行相位估计并对前后两个估计相位基于距离前后导频的位置进行加权求和以获得最佳相位估计信息。经过仿真验证,通过该算法后残余相噪在1 MHz和10 MHz处分别降低10 dBc/Hz和25 dBc/Hz。     

A Bregman-Split-Based Compressive Sensing Method for Dynamic Harmonic Estimation

In order to overcome the spectral interference of the conventional Fourier transform in the International Electrotechnical Commission framework, this paper introduces a Bregman-split-based compressive sensing (BSCS) method to estimate the Taylor–Fourier coefficients in a multi-frequency dynamic phasor model. Considering the DDC component estimation, this paper transforms the phasor problem into a compressive sensing model based on the regularity and sparsity of the dynamic harmonic signal distribution. It then derives an optimized hybrid regularization algorithm with the Bregman split method to reconstruct the dynamic phasor estimation. The accuracy of the model was verified by using the cross entropy to measure the distribution differences of values. Composite tests derived from the dynamic phasor test conditions were then used to verify the potentialities of the BSCS method. Simulation results show that the algorithm can alleviate the impact of dynamic signals on phasor estimation and significantly improve the estimation accuracy, which provides a theoretical basis for P-class phasor measurement units (PMUs).     

厄尔尼诺和南方涛动海气耦合模型中参数估计的变分方法

提出一种基于变分原理估计厄尔尼诺和南方涛动海气耦合模型中未知参数的方法. 首先将所研究的非线性海气耦合动力方程引入到目标泛函中; 接着利用变分方法导出伴随方程和待辨识参数泛函梯度的公式; 然后设计了估计未知参数的算法.数值试验结果表明变分方法是一 种能有效估计海气耦合非线性系统未知参数的方法.     

A novel clipping technique for filtering FM signals embedded in intensive noise

A novel adaptive clipping technique for filtering a constant amplitude frequency modulated (FM) signal embedded in non-Gaussian noise is proposed. It is based on the analysis and processing of the estimate of probability density function of a FM signal realization. As a result, modifications of two robust estimators of FM signal amplitude are proposed. It is shown that these estimators can be used for Gaussian and non-Gaussian heavy-tail environments. The proposed clipping technique can exploit one or another obtained robust estimate of the signal amplitude for adaptive setting a threshold. Analysis of signal estimate accuracy for different noise environments is carried out. Comparative analysis of the obtained methods and known approaches based on scanning window nonlinear filtering and optimal robust L-DFT form is performed. It is demonstrated that the usage of clipping-based technique leads to the considerable improvement of the FM signal filtering efficiency in comparison to the aforementioned known approaches for different noise environments and a wide range of input SNR values.     

RP-HPLC-DAD method for the determination of phenylepherine,paracetamol, caffeine and chlorpheniramine in bulk and marketed formulation

A simple, specific and accurate isocratic RP-HPLC-DAD method was developed for the simultaneous determination of phenylephrine, paracetamol, caffeine and chlorpheniramine in bulk and tablet dosage form. The four contents are present in variable concentrations and have variable chromatographic behavior making the process of analysis very difficult. For present studies a reversed-phase C-18 column (150 mm × 4.5 mm i.d., particle size 5 μm) with mobile phase consisting of acetonitrile, methanol and 10 Mm phosphate buffer 16:22:62 (v/v) (pH of buffer 2.5 ± 0.02, adjusted with ortho phosphoric acid) was used. The flow rate was 1.0 ml/min and eluents were monitored at 280 nm. The mean retention times of phenylephrine, paracetamol, caffeine and chlorpheniramine were found to be 1.8, 3.1, 5.2 and 10.9 min, respectively. The method was validated in terms of linearity, range, specificity, accuracy, precision and robustness. The proposed method was successfully applied to the estimation of phenylephrine, paracetamol, caffeine and chlorpheniramine in combined tablet dosage form.     

A FREQUENCY OFFSET ESTIMATION AND COMPENSATION ALGORITHM FOR K/Ka-BAND COMMUNICATIONS

This paper presents a new open-loop technique for estimating and correcting Doppler frequency shift in K/Ka-band communication systems with special reference to the advanced communications technology satellite (ACTS) mobile terminal (AMT) modem, which utilizes square-wave pulse-shaped, binary differential phase shift-keyed (DPSK) modulation. The novelty of this estimation scheme is that it exploits the Doppler-induced phase shift over a fraction of a symbol interval to provide an estimate of the Doppler offset, without requiring symbol synchronization. Furthermore, by utilizing time-differential detection (delay-and-multiply), the proposed technique can tolerate much larger frequency offsets than existing open- or closed-loop techniques. Analytical results are provided for the variance of the above estimator and the error probability performance of the AMT is evaluated in the presence of the Doppler correction. Practical design considerations are also discussed, including a method for modifying the front end, digital bandlimiting filter in such a way that Doppler bias effects in the new estimator are eliminated. Simulation results reveal that, in general, performance improves with increasing data rates, i.e., the new frequency offset estimation/compensation algorithm induces a degradation from ideal of approximately 1 dB at a 6 dB energy per data symbol (bit) and a 2⋅4 kbps data rate. However, there is no appreciable degradation when the data rate is increased to 9⋅6 or 19⋅2 kbps.