稀有气体卤化物准分子激光器工作气体实时补给技术

为延长稀有气体卤化物准分子激光器工作气体使用寿命,在原有供气设备基础上增加了工作气体实时补给技术.该技术采用FPGA控制系统将逐步提高放电电压、补充卤素气体和更换部分混合气体等操作有效组合起来.随着激光脉冲能量的下降,逐步提高放电电压;当放电电压达到最大值时,开始补充卤素气体,并恢复放电电压;当补充卤素气体效果不明显时,更换部分混合工作气体.将该技术应用于医用型ArF准分子激光器中进行实验研究,结果表明:在没有使用工作气体实时补给技术的情况下,激光器累计工作14.38 h后,输出单脉冲激光能量下降了17.2％;采用工作气体实时补给技术后,激光器输出能量下降速率明显降低,累计工作14.38 h,其单脉冲能量下降率能控制在3％范围内.因此,采用该技术可延长激光器工作气体的使用寿命、提高输出激光能量稳定性、减少停机次数并降低运行成本.     

Dynamics and optimal control in a spatially structured economic growth model with pollution diffusion and environmental taxation

In the first part of this paper we present a spatially structured dynamic economic growth model which takes into account the level of pollution and a possible taxation based on the amount of produced pollution. In the second part we analyze an optimal harvesting control problem with an objective function composed of three terms, namely the intertemporal utility of the decision maker, the space–time average of the level of pollution in the habitat, and the disutility due to the imposition of taxation.     

Model-Based Optimization of a Fed-Batch Bioreactor for mAb Production Using a Hybridoma Cell Culture

Production of monoclonal antibodies (mAbs) is a well-known method used to synthesize a large number of identical antibodies, which are molecules of huge importance in medicine. Due to such reasons, intense efforts have been invested to maximize the mAbs production in bioreactors with hybridoma cell cultures. However, the optimal control of such sensitive bioreactors is an engineering problem difficult to solve due to the large number of state-variables with highly nonlinear dynamics, which often translates into a non-convex optimization problem that involves a significant number of decision (control) variables. Based on an adequate kinetic model adopted from the literature, this paper focuses on developing an in-silico (model-based, offline) numerical analysis of a fed-batch bioreactor (FBR) with an immobilized hybridoma culture to determine its optimal feeding policy by considering a small number of control variables, thus ensuring maximization of mAbs production. The obtained time stepwise optimal feeding policies of FBR were proven to obtain better performances than those of simple batch operation (BR) for all the verified alternatives in terms of raw material consumption and mAbs productivity. Several elements of novelty (i–iv) are pointed out in the “conclusions” section (e.g., considering the continuously added biomass as a control variable during FBR).     

LPCVD设备的高精度串级温度控制系统

在大部分半导体工艺中,温度都是最重要的工艺参数之一,炉温的均匀性和稳定度对工艺都有着至关重要的影响。主要介绍了LPCVD设备中的高精度串级温度控制系统,该系统结构简单,控制效果良好,温度稳定度≤±0.5℃/24h。     

WinCC中应用MATLAB开发模糊解耦控制的方法

详细阐述了将MATLAB中开发的模糊解耦控制算法改写成一个C函数,将其封装在动态连接库中.通过WinCC调用动态连接库,将模糊控制的输出通过MPI多点传输协议传递给PLC驱动执行器,实现电石炉控制系统电极调节的模糊解耦控制.     

洁净室气态分子污染物的监测技术

随着微电子工业工序复杂性的增加和产品尺寸的不断缩小,气态分子污染物(AMC)对产品的影响成为洁净室环境控制中重点关注的问题。文章介绍了洁净室中AMC的定义,重点阐述了AMC的监测技术。     

自控液晶光阀组式光刻快门研究

通过理论推导,构建了抗蚀剂的感光特性、光源的光效与曝光量之间的数学模型,为液晶光阀代替穿孔带提供了理论依据.结合液晶光阀的工作原理和光刻快门的控制原理,对液晶光阀组的控制进行了研究并给出了其控制电路图.通过实际光刻试验,自控液晶光阀组光刻快门机构可以完成编码图案的控制,通光控制达到了预计要求,刻出的图案清晰,线条陡直.证明液晶光阀组替代穿孔带用作光刻快门是完全可行的.     

延迟反馈法控制Genesio混沌系统

采用延迟反馈方法控制Genesio混沌系统,结果表明,延迟时间和控制强度的不同使得控制结果有较大的差异,控制方向的不同会影响控制实现的难易程度.     

天然高分子药物微球载体材料的研究进展

综述了国内外在天然高分子药物微球载体材料研究及应用中的进展状况,主要从天然高分子药物微球载体材料的分类、微球的制备方法及特点、载药微球的给药途径和应用等进行概括,并对目前所存在的问题进行了描述。     

YBO3:Eu荧光粉的水热法制备及形貌控制

用水热法在低于300℃成功地制备出具有不同形貌的YBO3:Eu3+荧光粉,其反应温度比固相反应了约800℃.研究了初始原料、pH值、反应温度、反应溶剂和催化剂等条件对目的产物形貌及粒度的,得到了具有Vaterite结构、粒度分布均匀的球形荧光粉的最佳合成工艺.在254nm激发下,水热法的球形Y0.95Eu0.05BO3荧光粉最强发射峰位于598nm处,属于Eu3+的5D0→7F1的跃迁,是固相反应所品的1.5倍.这些结果表明,在PDP和荧光灯等显示和照明用荧光粉的制备中水热法具有潜在的应用.