二元复杂共混体系组成的SEC-LS分析

提供了一种利用体积排阻色谱-光散射(SEC-LS)联用技术来解决二元复杂共混体系组成的定量分析问题.基于体积排除色谱的绝对定量化原则,首先从理论上分析了共混物的光散射响应因子与组成呈线性关系.通过分析六组复杂共混体系的光散射响应因子与组成的关系,验证了该线性关系确实存在.进而利用该线性关系计算了共混体系的组成.在某些共混体系中,通过光散射响应因子得出的组成比利用示差法得出的组成更加接近原料组成.通过分析这两种方法产生误差的来源,阐述了产生该现象的原因.     

多糖凝胶的孔径和化学结构对单壁碳纳米管流动性和选择性分离的影响

基于凝胶柱色谱分离技术研究了单分散的单壁碳纳米管(SWCNTs)在不同化学结构多孔多糖凝胶中的流动特性以及对金属型(m-)/半导体型(s-)SWCNTs分离的影响.通过比较SWCNTs在一系列不同孔径的葡聚糖Sephacryl凝胶中的流动行为,发现减小孔径尺寸能够增强s-SWCNTs与凝胶之间的吸附作用力,使大直径的m-SWCNTs快速地流过凝胶颗粒,而选择性地保留了小直径的s-SWCNTs.进一步发现多糖凝胶化学结构比孔径尺寸在SWCNTs的m/s分离中起着更重要的作用.当基于葡聚糖结构的Sephacryl凝胶中的氨基结构被琼脂糖结构所取代时,如Superdex 200和Sepharose 2B凝胶会增强它们与SWCNTs之间的作用力,使SWCNTs的保留时间延长,降低了s-SWCNTs的选择性和纯度.此外,即使拥有与Sephacryl S100类似的孔径范围,当Sephacryl凝胶中的氨基被疏水环氧丙烷基团取代时,葡聚糖凝胶Sephadex G100与SWCNTs的作用力很弱,导致所有SWCNTs快速流动,无法实现SWCNTs的m/s分离.因而,我们认为凝胶孔径和化学结构共同影响并调控了SWCNTs的m/s分离的选择性、纯度以及分离效率.     

Composition and spectral studies of polyaniline salts

Five different polyaniline salts have been prepared by chemical polymerization of aniline in aqueous solution of different acids. The polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Electron paramagnetic, electronic absorption, infrared spectral and conductivity measurements have been performed on the polyaniline salts and polyaniline bases. This composition and the extent of dopant in polyaniline salt systems have been determined. There is no definite correlation between the conductivity and the stoichiometric ratio between the polyaniline base and the acid, and also the spin concentration.     

Composition of 2-(3,5-dibromo-2-pyridylazo) diethylaminophenol chelates by liquid chromatography

Summary The composition of 3,5-diBr-PADAP metal chelates was determined by liquid chromatography employing appropriate eluents and non-polar bonded stationary phase. The metal-to-ligand ratios were 12, 12 and 12 for Cu(II), Co(III) and Cr(III) respectively, and the V(V)-to-ligand ratio found to be 111 in V(V)-3,5-diBr-PADAP-H₂O₂ in the presence of H₂O₂. The results are in agreement with literature data.     

超细碳氮化钛的分析和评估

采用多种技术对超细碳氮化钛进行组成分析。可分别测定吸附和化合状态的氧。晶格常数与(原子比)具有线性关系,表明碳与氮可以相互无限置换,分子式为Ti C_xN_(1-x),每一样品只有一种C/N比.固溶体是均质的。气相合成的碳氮化钛含微量杂质,包括游离碳和氯根等,主相量显著地受吸附氧量影响,可控制达97％以上。介绍了拟定的分析方法。     

Removal of phosphate from aqueous solution by zeolite synthesized from fly ash

Fifteen Chinese fly ashes were converted hydrothermally into zeolites, and phosphate immobilization capacity (PIC) of the synthesized zeolites and the corresponding raw fly ashes were determined using an initial phosphate concentration of 1000 mg/L. Results showed that there was a remarkable increase in PIC (from 1.2 to 7.6 times) following the synthesis process. Fractionation of immobilized phosphorus indicated that Fe+Al-P increased most significantly and consistently among all the phosphorus fractions following the conversion of fly ash to zeolite. The PIC and Ca+Mg-P were closely related to Ca content (with r values of 0.9683 and 0.9651, respectively) rather than Mg content (with r values of 0.3920 and 0.3212, respectively). The r values of PIC and Fe+Al-P with Fe content (with r values of 0.4686 and 0.6385, respectively) were higher than those with Al content (with r values of -0.7857 and -0.3770, respectively). Although calcium and iron components were mainly involved in phosphate immobilization, there was no significant change of Ca and Fe content following the conversion of fly ash to zeolite. Increase in dissociated Fe(2)O(3) and specific surface area probably accounted for the enhancement in PIC of synthesized zeolites compared with corresponding fly ashes. The PIC value of zeolites showed a significant correlation with dissociated Fe(2)O(3) (r=0.6186). The specific surface area increased 26.0-89.4 times as a result of the conversion of fly ash to zeolite. The maximum removal of phosphate occurred within different pH ranges for zeolites which were synthesized from high, medium and low calcium fly ashes and this behavior was explained by the reaction of phosphate with calcium and iron components.     

Identification of polyimide materials using quantitative CE with UV and QTOF‐MS detection

Polyimides (PIs) are a group of widely used synthetic materials that service a variety of different purposes including microelectronics, insulating films and aerospace applications. Depending on the requirements (defined by the particular final product), the actual composition of PIs may show substantial chemical variation. To study this variation in chemical structure, CE‐MS can be employed for the determination of PI composition following chemical degradation of the polymer sample. PI is chemically decomposed to corresponding aromatic diamine and carboxylic acid components using an alkali fusion reaction. Solid polymer samples are fused in a potassium hydroxide melt yielding reaction products that are diluted in acid and can be immediately analysed by CE coupled to a Q/TOF‐MS with quantification performed using conventional UV detection. This approach involves a simple and rapid sample preparation yielding both qualitative and quantitative information regarding the chemical composition of the polymer. Application of the CE‐MS approach is shown for a range of commercially available PI and poly(amide–imide) materials and the results are used to infer the respective chemical compositions.     

Adjoints of rationally induced composition operators

We give an elementary proof of a formula recently obtained by Hammond, Moorhouse, and Robbins for the adjoint of a rationally induced composition operator on the Hardy space H² [Christopher Hammond, Jennifer Moorhouse, Marian E. Robbins, Adjoints of composition operators with rational symbol, J. Math. Anal. Appl. 341 (2008) 626-639]. We discuss some variants and implications of this formula, and use it to provide a sufficient condition for a rationally induced composition operator adjoint to be a compact perturbation of a weighted composition operator.     

Colour symmetry double point groups

Thirty four distinct composition series arising out of the 32 crystallographic double point groups are employed to re-derive in a simple and elegant fashion all the 169 distinct colour symmetry groups generated by the 32 double point groups, exploiting the idea of colour generators. The advantage of the method employed and some possible applications of these colour groups are discussed. The resulting colour groups are tabulated.     

Randomness versus Fault-Tolerance

We investigate the relations between two major properties of multiparty protocols: fault tolerance (or resilience ) and randomness . Fault-tolerance is measured in terms of the maximum number of colluding faulty parties, t , that a protocol can withstand and still maintain the privacy of the inputs and the correctness of the outputs (of the honest parties). Randomness is measured in terms of the total number of random bits needed by the parties in order to execute the protocol. Previously, the upper bound on the amount of randomness required by general constructions for securely computing any nontrivial function f was polynomial both in n , the total number of parties, and the circuit-size C(f) . This was the state of knowledge even for the special case t=1 (i.e., when there is at most one faulty party). In this paper we show that for any linear-size circuit, and for any number t < n/3 of faulty Received 30 April 1998 and revised 3 January 1999 and 1 July 1999