药物不良反应的特点与预防

药物不良反应已成为全社会关注的热点，及时了解有关不良反应的情况并采取必要的预防措施，以保证患者用药安全，维护患者身体健康是医务工作者刻不容缓的任务。     

侧链对聚对苯撑乙炔溶解性和光谱性能的影响

利用钯催化反应合成了一类侧链含不同烷氧取代基(甲氧基，辛烷氧基，十二烷氧基)的聚时苯撑乙炔，讨论了侧链烷氧取代基对聚对苯撑乙炔的分子量和溶解性的影响，比较了聚合物的紫外吸收光谱和荧光光谱特征。     

络合氢化物Ti-NaAlH4的制备与储氢特性

采用Ti粉为催化剂前驱体、预处理Al粉和NaH为合成原料, 通过机械球磨-加氢方法合成出络合氢化物Ti-NaAlH4, 系统研究了球磨保护气氛、球磨时间和氢化加氢压力等制备参数对其储氢性能的影响. 结果表明, 制备方法对Ti-NaAlH4储氢特性有很大影响. 与氩气保护气氛相比, 在氢气气氛中球磨制备的复合物具有更高的吸放氢性能. 在氢气保护气氛下, 随着球磨时间从6 h增至24 h, 复合物的吸氢容量和吸氢速率先增后减, 12 h时达到最佳值, 而复合物的放氢容量和放氢速率则逐渐增高; 进一步延长球磨时间会使颗粒发生团聚, 从而导致吸氢性能下降. 随着氢化加氢压力从7.5 MPa升至13.5 MPa, 复合物的吸氢容量(质量分数)由2.83%逐渐增至4.21%. 复合物球磨后出现的Na3AlH6中间氢化物相表明, 在氢气下掺Ti球磨对NaH和Al的氢化反应起到很好的促进作用.     

咪唑-金属配合物的合成、性质及其与DNA的作用机理

Three hexakis（imidazole）metallo complexes of Co, Cd and Ni were synthesized and spectroscopically characterized. The crystal and molecular structures have been determined by X-ray crystallography analysis. The metal ions have an octahedral geometry with the MN6 chromophore. The electrochemical experimental results indicate that both [Co（Im）6]C12·2HCl·2H2O （1） and [Ni（Im）6]C12·4H2O （3） [Im=imidazole] could interact with DNA mainly by intercalation.     

硝酸、硫化钠溶液浸取冷原子荧光法选择性测定土壤及河流沉积物中硫化汞

本文研究了饱和硫化钠溶液对土壤样品中硫化汞的浸取效率(其加标回收率达100%),以及用硝酸和硫化钠溶液对样品中汞的选择性浸取并研究了土壤中硫化汞垂直分布。提出了利用硝酸、饱和硫化钠溶液浸取,由冷原子荧光法选择性测定土壤及河流沉积物中硫化汞的新方法。用该方法对同一样品进行8次测定,其相对标准偏差为7.1%。     

Comment on papers by K. Shanahan that propose to explain anomalous heat generated by cold fusion

Dr. Shanahan has published two papers (Thermochim. Acta 428 (2005) 207, Thermochim. Acta 382 (2002) 95) in which he argues that excess heat claimed to be produced by cold fusion is actually caused by errors in heat measurement. In particular, he proposes that unrecognized changes in the calibration constant are produced by changes in the locations where heat is being generated within the electrolytic cell over the duration of the measurement. Because these papers may lend unwarranted support to rejection of cold fusion claims, these erroneous arguments used by Shanahan need to be answered.     

Simultaneous Determination of Four Active Components in a Compound Formulation by Liquid Chromatography

Summary A rapid and accurate LC method is described for simultaneous determination of pseudoephedrine hydrochloride (PSE), acetaminophen (AMP), dextromethorphen hydrobromide (DEX), and diphenhydramine hydrochloride (DPH) in a compound formulation. Chromatographic separation of the four drugs was achieved on a Hypersil CN column (150 mm × 4.6 mm, 5 m particle) by use of a mobile phase comprising a mixture of 3 mM ion-pairing solution, 2% aqueous triethylamine solution, and 2 M phosphoric acid, 68:48:88 (v/v), pH 3.0, delivered at 1.0 mL min^–1. Compounds were detected at 215 nm and the run time was less than 10 min. The linearity, accuracy, and precision of the method were found to be acceptable over the concentration ranges 6.1–36.4 g mL^–1 for PSE, 65.0–390.0 g mL^–1 for AMP, 3.1–18.6 g mL^–1 for DEX, and 5.0–30.0 g mL^–1 for DPH.     

Some exact expressions for the mean and higher moments of functions of sample moments

Examples of exact expressions for the moments (mainly of the mean) of functions of sample moments are given. These provide checks on alternative developments such as asymptotic series for n, and simulation processes. Exact expressions are given for the mean of the square of the sample coefficient of variation, particularly in uniform sampling; Frullani integrals studied by G. H. Hardy arise. It should be kept in mind that exact results for (joint) moment generating functions (mgfs) are of interest as they produce a means of obtaining exact results for (cross) moments—including moments with negative indices. Thus an exact expression for the joint mgf of the 1st two noncentral moments can be used to obtain the mean of the (c.v.)² (but not for the mean of the c..). A general expression is given for the moment generating function of the sample variance. The limitations of Fisher's symbolic formula for the characteristic function of sample moments (or more general statistics) are noted.This research was sponsored by the Applied Mathematical Sciences Research program, Office of Energy Research, U. S. Department of Energy under contract DE-AC0584OR21400 with the Martin Marietta Energy Systems. Inc.     

Two-beam interference detection of the changes in fibre structural parameters during low drawing process

A Pluta polarizing interference microscope with a fibre stretching device attached was used to detect the changes in molecular structure that occur during the fibre cold drawing process. Fibres drawn with low draw ratios show different types of deformation mechanisms. The interference patterns recorded at different draw ratios are used to relate the deformation mechanisms with the measured structural parameters. Some optical parameters are measured such as; refractive indices nand n birefringence n, the polarizability per unit volume , the orientation distribution function f(θ), the angle θ between the stretching direction and the chain axis, and the angle θ_m which the transition dipole moment of the molecular species makes with the molecular axis (chain axis). Three polymeric fibres (Polyethylene terephthalate PET, Polypropylene PP and Polyamide PA) were used in this study and their interferograms are illustrated.     

Method and algorithm of obtaining the molecular intrinsic characteristic contours (MICCs) of organic molecules

The molecular intrinsic characteristic contour (MICC) is defined as the set of all the classical turning points of electron movement in a molecule. Studies on the MICCs of some medium organic molecules, such as dimethylether, acetone, and some homologues of alkanes, alkenes, and alkynes, as well as the electron density distributions on the MICCs, are shown for the first time. Results show that the MICC is an intrinsic approach to shape and size of a molecule. Unlike the van der Waals hard-sphere model, the MICC is a smooth contour, and it has a clear physical meaning. Detailed investigations on the cross-sections of MICCs have provided a kind of important information about atomic size changing in the process of forming molecules. Studies on electron density distribution on the MICC not only provide a new insight into molecular shape, but also show that the electron density distribution on the boundary surface relates closely with molecular properties and reactivities. For the homologues of alkanes, Rout(H), Dmin, and Dmax (the minimum and maximum of electron density on the MICC), all have very good linear relationships with minus of the molecular ionization potential. This work may serve as a basis for exploring a new reactivity indicator of chemical reactions and for studying molecular shape properties of large organic and biological molecules.