Effect of permanent magnet configuration on discharge characteristics in cylindrical Hall thrusters

Magnetic field design is important in cylindrical Hall thrusters and using permanent magnets to generate magnetic field is very promising in the future. In two typical permanent magnet configurations (i.e., ring and cylindrical configurations) of cylindrical Hall thrusters, discharge characteristics are compared in this paper through the experiments and simulations. The study shows that the cylindrical configuration can bring about higher thruster performance in the same working condition. The reason is that the potential drop of the cylindrical configuration is mainly concentrated in the channel, which is beneficial for the electrons to obtain energy to promote the ionization of the propellant. However, the voltage regulation range of the cylindrical configuration is lower because the anode is more easily overheated.     

Investigation on the mechanism of charge generation in organic heterojunctions: Analysis of I–V and C–V characteristics

The charge generation mechanism of organic heterojunction (OHJ) consisted of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN) and different hole transporting materials (HTMs) are studied systematically by current-voltage (I–V) and capacitance-voltage measurements. The analysis of I–V characteristics of the devices based on OHJs at forward and reverse voltages by comparing the thickness of HTM layers finds that a forward and reverse symmetrical I–V curve is observed at thin HTM layers and the forward current becomes larger than the reverse current with the increase of HTM thickness, fully illustrating the effectiveness of OHJ charge generation. Moreover, the I–V characteristics at different temperatures indicate that the efficient charge generation is originated from electron tunneling rather than diffusion. And the C–V and capacitance-frequency (C–F)characteristics further illustrate the highly efficient charge generation ability of OHJs so that the charge density is as high as 4.5 × 10¹⁷ cm⁻³, guaranteeing the high conductivity of OHJs, which is very beneficial to developing highly efficient OLEDs using OHJs as charge injector and generator.     

Non‐self‐adjoint singular second‐order dynamic operators on time scale

In this study, maximal dissipative second‐order dynamic operators on semi‐infinite time scale are studied in the Hilbert space , that the extensions of a minimal symmetric operator in limit‐point case. We construct a self‐adjoint dilation of the dissipative operator together with its incoming and outgoing spectral representations so that we can determine the scattering function of the dilation as stated in the scheme of Lax‐Phillips. Moreover, we construct a functional model of the dissipative operator and identify its characteristic function in terms of the Weyl‐Titchmarsh function of a self‐adjoint second‐order dynamic operator. Finally, we prove the theorems on completeness of the system of root functions of the dissipative and accumulative dynamic operators.     

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响，通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究，获得退火前后曲面表面残余应力的大小，得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑，对中国聚变工程实验堆真空室的研究与制造具有重要意义。     

复杂换热网络MINLP中的非线性特性分析

针对复杂换热网络MINLP问题,本文应用多维函数渐变法探索和分析了连续变量和整型变量引起的网络性能非线性和非凸特性。研究表明,当系统规模增大时,不但连续变量的叠加效应将增加系统的非线性,整型变量将使得非线性特性更为严重。     

三维荧光光谱的特征区域选择方法

将数学中的二元凸函数判定和数据挖掘中的聚类分析方法结合,提出了针对三维荧光的光谱区域选择方法,并利用此种方法从光谱图中提取出含有丰富光谱信息的凸集区域。对水体中总有机碳的检测和白酒中黄曲霉素的检测进行了实验研究,实验结果表明,采用本文提出的三维荧光光谱区域选择方法提高了模型的精度,与利用全光谱所建立的回归模型相比,模型精度分别提高了6.17%和4.97%。     

Intrinsic current–voltage characteristics of metal-carbon nanotube networks: A first-principles study

The interconnections involving metal atoms in single-walled carbon nanotube (SWNT) networks are crucial for building nanoscaled devices. The influence of the metal-(η⁶-SWNT) interconnects in the electrical conductivity of SWNT film have been reported in recent experiments [X. Tian et al. Nano lett. 2014,14,3930]. Using non-equilibrium Green's function with density function theory, we performed theoretical calculations on the electron transport properties of (Cr, Li, Au)-SWNT systems. We revealed the roles of transition metal Cr, alkalis metal Li and inert metal Au in improving the electrical conductance of metal-SWNT systems. Our calculated results show that transport properties along the inter-tube direction are strongly dependent on the connecting metal atoms varying over many orders of magnitudes. Gold atoms fail to enhance the electrical conductance of SWNT systems. Meanwhile, negative differential resistances are demonstrated in semiconducting inter-tube models, which would have potential applications in the electronic device. Our results provide a promising way to optimize the performance of SWNT based networks.     

Tristable switching of the electrical conductivity through graphene quantum dots sandwiched in multi-stacked poly(methyl methacrylate) layers

Tristable switching nonvolatile memory (NVM) devices based on graphene quantum dots (GQDs) sandwiched between multi-stacked poly (methyl methacrylate) (PMMA) layers were fabricated on indium-tin-oxide (ITO)-coated glass substrates by using a solution-processed method. Current-voltage (I-V) curves at 300 K for the silver nanowire/PMMA/GQD/PMMA/GQD/PMMA/ITO/glass devices showed tristable switching currents with high-resistance, intermediate-resistance, and low-resistance states. The device's cycling endurance of the three resistance states remained stable with a distinguishable value for each resistance state over 1000 cycles, and the obtained retention results showed well-distinguished resistance states without degradation for up to 1 × 10⁴ s. Schottky emission, Poole-Frenkel emission, trapped-charge limited-current, and ohmic conduction were proposed as the dominant conduction mechanisms for the fabricated NVM devices based on the obtained I-V characteristics. The described energy-band diagrams confirm the proposed conduction band mechanisms.