Determination of amino acids in the hepatic and brain tissue of the rat by gas chromatography

A procedure is described for the quantitative determination of amino acids in hepatic and brain tissue samples from the rat. Because the presence of certain matrix components in the tissue material led to interference with chromatographic analysis they were removed by a prechromatographic “clean-up” step. Quantitative analysis of amino acids, as their N-heptafluorobutyryl iso-butyl ester derivatives, was achieved by high resolution gas chromatography on an apolar fused silica open tubular column. Reproducibility data from the complete procedure are presented; coefficients of variation for arginine and histidine in hepatic tissue varied between 7.1 and 10.1% whereas those for most other amino acids were better than 5%, with a mean recovery of 90%.     

Spectroscopic study of the reaction of tetramethyldisiloxane with a cold remote nitrogen plasma. Effect of dioxygen addition in the reactive mixture

The interaction of 1,1,3,3-tetramethyldisiloxane with a cold remote nitrogen plasma is studied by visible ultraviolet emission spectroscopy. Evolutions of emissions when dioxygen is added in the remote plasma region are correlated with the previously studied main characteristics of the polymeric deposition. The role of the energy vectors is discussed. New emissions are attributed to the triatomic Si O Si molecule.     

Melting and glass transitions in paraffinic and naphthenic oils

Naphthenic and paraffinic oils were analyzed by modulated differential scanning calorimetry (MDSC). The results showed several improvements in the analysis of thermal properties when compared with standard DSC. The glass transition temperature (T_g), the enthalpy relaxation at T_g, and the melting endotherms could be deconvoluted, and reversible melting could be identified. This allowed for an easier interpretation of the thermal properties of the oils. With MDSC, the T_gs in mineral oils were found to coincide with endothermic enthalpy relaxation, which is generally regarded as a melting endotherm with standard DSC. A decrease in heat capacity after T_g was attributed to the existence of rigid amorphous material. From Δc_p at T_g and the oil molecular weight, the number of repeat units in the oil chains was estimated at less than 20. The T_g of a hypothetical pure aromatic oil was found to be similar to that for petroleum asphaltenes, and that for a naphthenic oil of infinite molecular weight to be similar to that of petroleum resins.     

Determination of mercury in biological samples by cold vapor atomic absorption spectrometry following cloud point extraction with salt-induced phase separation

Method development for the pre-concentration of mercury in human hair, dogfish liver and dogfish muscle samples using cloud-point extraction and cold vapor atomic absorption spectrometry is demonstrated. Before the extraction, the samples were submitted to microwave-assisted digestion in a mixture of H₂O₂ and HNO₃. Cloud point extraction was carried out using 0.5% (m/v) ammonium O,O-diethyldithiophosphate (DDTP) as the chelating agent and 0.3% (m/v) Triton X-114 as the non-ionic surfactant. Phase separation was induced after the addition of Na₂SO₄ to a final concentration of 0.2 mol L⁻¹. Aliquots of the final extract were transferred to PTFE tubes and NaBH₄ and HCl were added. The mercury vapor was driven to a non-heated quartz tube for measuring the absorbance. The results obtained with salt-induced phase separation were in good agreement with the certified values at a 95% confidence level. An enrichment factor of 10 allowed a detection limit of 0.4 ng g⁻¹ to be obtained, which demonstrates the high sensitivity of the proposed procedure for the determination of mercury at trace levels.     

冷原子荧光法间接测定水中氰化物

本文详细研究了氰化物蒸馏条件及其稳定性问题，建立了一个冷原子荧光法间接测定水中氰化物的方法，并用于海水及氰化液中痕量ＣＮ－的测定，结果令人满意。ＣＮ－检出限为０．０２μｇ／ｍＬ，回收率９５％～９８％，变异系数７．３％～８．９％。     

Sequential quantification of methyl mercury in biological materials by selective reduction in the presence of mercury(II), using two gas–liquid separators

The present procedure is based on the sequential selective reduction of mercury(II) and methyl mercury using two gas–liquid separators in series. Cold vapor atomic absorption spectrometry was used for detection. Mercury(II) is reduced by a 0.01% m/v sodium tetrahydroborate solution and driven to the absorption cell in the first separator. The methyl mercury species is reduced by the same reductant but at a 0.3% m/v concentration, and in the presence of iron(III) chloride. Parameters such as argon flow rate, and the NaBH₄ and dithiophosphoric acid diacyl ester concentrations were optimized. At the optimized conditions, and using aqueous standards for calibration, the corresponding limits of detection (3σ_b, n=10) were 400 and 600 ng l⁻¹ for mercury(II) and methyl mercury, respectively. The sample throughput was 12 h⁻¹. The procedure was used for the determination of methyl mercury in dogfish liver and dogfish muscle certified reference materials, and good concordance between found and certified values was observed.     

Cold on-column – solvent split injection with a three-way press-fit device

In a previous paper we described the possibilities of cold on-column – sample split injection achieved by means of an inexpensive and simple three way press-fit device [1]. The same arrangement is proposed here for cold on-column – solvent split injection in which specific elimination of the solvent, without loss of any other sample components, is achieved by opening the splitting tube (or better, in this case, the early solvent vapor exit) during solvent elution, and then closing it during elution of the sample's other components. Discrimination between solvent and other sample components is achieved by means of a retention gap, a retaining precolumn, and an early vapor exit. The technique enables both selective enrichment of a sample, in order to record satisfactory mass and infrared spectra of minor components, and injection of large volumes (up to 100 μl) of dilute solutions which cannot be concentrated because of component volatility. Details of the assembly and tuning the system are given, together with some examples.     

痕量汞、氰化物及硫化物的冷原子荧光测定

本文介绍用冷原子荧光法测定汞、间接测定氰化物及硫化物的条件,干扰情况及干扰的消除。样品取自太湖底泥,结果表明,汞的标准偏差为0.0033,变异系数为9.4%,平均回收率为102%,可检出0.2ppb的汞量;氰化物的标准偏差为0.40,变异系数为8.3%,平均回收率为87%,可检出0.25ppb的CN~-;硫化物的标准偏差为3.0,变异系数为6.5%,可检出2ppb的S~-。     

A new room temperature ionic liquid 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate as a solvent for extraction and preconcentration of mercury with determination by cold vapor atomic absorption spectrometry

A new room temperature ionic liquid 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate abbreviated as [C₄tmsim][PF₆] was synthesized and developed as a novel medium for liquid/liquid extraction of inorganic mercury in this work. Under optimal condition, o-carboxyphenyldiazoamino-p-azobenzene abbreviated as CDAA reacted with inorganic mercury to form a neutral Hg-CDAA complex, the complex was rapidly extracted into ionic liquid phase. After back-extracting into aqueous phase with sulfide sodium solution, the mercury concentration was detected by cold vapor atomic absorption spectrometry. The extraction and back-extraction efficiencies were 99.9 and 100.1% for 5.0 μg L⁻¹ standard mercury in 1000 mL of water solution, respectively. The detection limit, calculated using three times the standard error of estimate of the calibration graph, is 0.01 ng of mercury per milliliter water sample. The proposed method has been used to the determination of trace inorganic mercury in natural water with satisfactory results. Moreover, Zeta potential and surface tension of [C₄tmsim][PF₆] solution were measured and applied to explain the extraction mechanism of [C₄tmsim][PF₆] system.     

Progress on the optical lattice clock

Optical lattice clocks have made significant leaps forward in recent years, demonstrating the ability to measure time/frequency at unprecedented levels. Here we highlight this progress, with a particular focus on research efforts at NIST and JILA. We discuss advances in frequency instability and the characterization of key systematic effects, with a brief outlook to the future.