开关型霍尔传感器的原理与工程实现

介绍了开关型霍尔传感器的工作原理，设计了适用于工程测量的具体线路，并分析了该线路的特点。     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

后退火温度对溅射沉积Pb(Zr0.52Ti0.48)O3铁电薄膜结构和性能的影响

在具有Ti缓冲层的Pt(111)底电极上,用射频溅射工艺在较低的衬底温度(370℃)和纯Ar气氛中沉积Pb(Zr0.52Ti0.48)O3(PZT)薄膜,沉积过程中基片架作15°摇摆以提高膜厚的均匀性。然后将样品在大气中进行5min快速热退火处理,退火温度550-680℃。用XRD、SEM分析薄膜的微结构,RT66A标准铁电测试系统测量样品的铁电和介电性能。结果表明,所沉积的Pt为(111)取向,仅当后退火温度高于580℃,沉积在Pt(111)上的PZT薄膜才能形成钙钛矿结构的铁电相,退火温度在580-600℃时结晶为(110)择优取向,退火温度高于600℃时结晶为(111)择优取向。PZT薄膜的极化强度随退火温度的升高而增加,但退火温度超过650℃时漏电流急剧上升,因此退火处理的温度对PZT薄膜的结构和性能有决定性的影响。     

射频激励扩散型冷却阵列波导CO2激光器技术

本文介绍了目前国内外研究者们提出的各种射频激励相干阵列波导ＣＯ２激光器技术，讨论了射频激励相干阵列波导ＣＯ２激光器技术的一个研究方向。     

带有光放大的波分复用技术在光纤通信中的应用

本文论述了波分复用技术的优点及其应用；介绍了波分复用技术与光纤放大器相结合后的发展概况２；评述了波分复用技术发展中的主要问题及其在当前实用系统中的解决方案和今后的发展方向。     

钕玻璃激光放大器反转粒子数的荧光测定法

本文报道了通过测量钕玻璃激光放大器在一定泵浦功率下的荧光波形的方法,获得放大器中反转粒子数密度随时间的变化关系,进而得到反转粒子数密度达到最大值的时刻的测定方法及实验结果。     

一种流水型40 MSPS高速采样保持器

通过理论分析和实验仿真,提出了一种流水型高速采样保持器电路(S/H)。采用4个采样率为10 MSPS的S/H,构成一个流水型电路结构的S/H,采样率达到40 MSPS。文章提出的电路结构,在一定程度上解决了采样速率与精度的矛盾关系,可以在组合S/H精度等同于单个S/H精度的前提下,将组合S/H采样速率提高到单个S/H的数倍。     

Ce3+对Er3+/Yb3+共掺氟磷酸盐玻璃光谱性质的影响

研究了能量接受离子Ce³⁺对Er³⁺上转换发光强度以及Er³⁺在1.5μm附近波段发光性能参数的影响，并从能量匹配及能级结构角度出发对Er³⁺/Ce³⁺间的能量转移机制进行了分析.分析认为，⁴I_11/2能级的Er³⁺通过无辐射能量转移把能量传递给²F_5/2能级的Ce³⁺关键词： 氟磷酸盐玻璃 光谱性质 光纤放大器 3+和Ce³⁺')" href="#">Er³⁺和Ce³⁺     

基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

Effects of Amplitude of the Radiofrequency Electromagnetic Radiation on Aqueous Suspensions and Solutions

The effects of radiofrequency (RF) (1–4) and magnetic fields (5–9) on the behavior of aqueous solutions and suspensions have been a popular subject in recent years. The mechanism of the magnetic “water memory” effect, though, is still largely unknown (5). In this work, we present evidence that the primary “receptor” of the electromagnetic radiation is a gas/liquid interface. Gas can be either already present in water or produced by the effects of electromagnetic fields. Perturbed gas/liquid interfaces require hours to equilibrate. Certain RF and magnetic signals also produce reactive oxygen and hydrogen species (superoxide, hydrogen peroxide, hydrogen, atomic hydrogen). The perturbed gas/liquid interface modifies the hydrogen bonding networks in water and also the hydration of ions and interfaces. Careful outgassing removes all of the effects of the electromagnetic fields, including the magnetic memory effect. The amplitude of the applied field influences the observed effects. Different amplitudes of RF radiation perturb the interfacial water in different ways and consequently affect the behavior of colloids and ions in specific manners. For instance, the bulk and template precipitation of calcium carbonate, zeta potentials of suspended colloids, rate of dissolution of colloidal silica, and attachment of colloidal silica to metal surfaces are modified in specific ways with the low amplitude or high amplitude RF treatments described in this paper. The solubility/diffusivity of gas species is also modified in a different manner, and it is probably at the core of the specificity of the RF amplitude effects.