Formation of halogenated by-products of parabens in chlorinated water

Chemical transformations of four alkyl esters of p-hydroxybenzoic acid, parabens, in chlorinated water samples are investigated. Quantification of the parent species and identification of their reaction by-products were performed using gas chromatography in combination with mass spectrometry. Experiments were accomplished considering free chlorine and paraben concentrations at the mg L⁻¹ and μg L⁻¹ level, respectively. Concentration of water samples, using solid-phase extraction, and silylation of the target species were carried out in order to improve the detectability of parent species and their possible transformation products, achieving quantification limits at the low ng L⁻¹ level. Under employed experimental conditions, the decrease in the concentrations of parabens followed pseudo-first-order kinetics. Half-lives values obtained for model ultrapure water solutions were in good agreement with those observed in tap water samples. For the first type of sample, only two by-products were detected for each paraben. They corresponded to chlorination of the aromatic ring in one or two carbons situated in ortho-positions to the hydroxyl group. Both species were also generated after the addition of parabens to chlorinated tap water. Moreover, three new transformation products were noticed for each parent compound. They were identified as bromo- and bromochloro-parabens, formed due to the existence of traces of bromide in tap water sources. Experiments carried out by mixing paraben-containing personal care products with tap water, containing free chlorine, confirmed the formation of all above described halogenated by-products. In addition, the presence of the di-chlorinated forms of methyl and propyl paraben has been detected for first time in raw sewage water samples.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: An improved method based on a proper strategy for sample homogenization and calibration with inorganic standards

Official guidelines to perform chlorine determination in crude oil are (i) American Society for Testing and Materials (ASTM) D6470, which is based on the extraction of water from the oil and subsequent determination of the chloride by potentiometry, (ii) ASTM D3230, that measures the conductivity of a solution of crude oil in a mixture of organic solvents and (iii) US Environmental Protection Agency (EPA) 9075 that uses energy dispersive X-ray fluorescence spectrometry to quantify chlorine and it is applicable for the range from 200 μg g^− 1 to percent levels of the analyte. The goal of this work is to propose method to quantify lower amounts of chlorine in crude oil using energy dispersive X-ray fluorescence spectrometry using a simple calibration strategy. Sample homogenization procedure was carefully studied in order to enable accurate results. The calibration curve was made with standards prepared by diluting aqueous NaCl standard in glycerin. The method presented a linear response that covers the range from 8 to at least 100 μg g^− 1 of chlorine. Chlorine in crude oil samples from Campos Basin - Brazil were quantified by the proposed method and by potentiometry after extraction of chlorine from the oil. Results achieved using both methods were statistically the same at 95% confidence level.     

Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.     

C1/Ag(111)体系研究 Ⅳ.氯吸附对甲醇吸附氧化的影响

运用HREELS技术对甲醇在预吸附氯的Ag(111)表面上的吸附氧化行为进行了较细致的研究.结果证明Cl对甲醇氧化的影响缘于它在Ag(111)上的吸附所引起的表面结构的改变进而改变表面氧吸附物种,从而使得甲醇氧化的中间产物发生变化.实验结果说明甲醇在Ag(111)和低暴露量氯吸附的Ag(111)表面上的氧化行为是相似的,检测到了中间产物Ⅰ和Ⅲ;在高暴露量氯吸附的Ag(111)上甲醇氧化时则产生中间产物Ⅰ、Ⅳ和甲醛物种.对上述不同的甲醇氧化行为作了分析,并指出了以前人们在考察甲醇氧化机理时只考虑原子氧作用的片面性.     

Study on hypochlorite degradation of aromatic polyamide reverse osmosis membrane

A serious limitation of most commercial polyamide reverse osmosis (RO) membranes is their sensitivity to chlorine attack. By studying the hypochlorite degradation of aromatic polyamide RO membrane, this work was to get some understandings in the prevention of membrane depreciation and develop membranes with improved chlorine resistance. Membrane performances, including water flux and salt rejection, were evaluated before and after hypochlorite exposure under different pH and concentration conditions. The results showed that chlorination destroyed hydrogen bonds in polyamide chains, causing a notable decline of membrane flux especially in acid environment; however, membrane performance was slightly improved after the treatment of alkaline hypochlorite solution for a certain time, which was probably due to the effect of amine groups in barrier layer. Based on the attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) characterizations and performance measurements, the results indicated that N-chlorination reaction of aromatic polyamide was also reversible, in other words, the N-chlorinated intermediate could be regenerated to initial amide with the alkaline treatment before ring-chlorination reaction. This conclusion provided several relative suggestions for membrane cleaning procedures. Finally, a method adopting surface coating was proposed to develop membranes with good chlorine resistance, and the preliminary results showed its potential for applications.     

Review of analytical methods for the determination of chlorine dioxide

The present study reviews more than twenty years (1985-present) of published research on the development and application of analytical procedures for the determination of chlorine dioxide, a widely used disinfectant and bleaching agent. The review covers a variety of techniques including batch and automated spectrophotometry and fluorimetry, electroanalysis and chromatography. The analytical figures of merit to the methods are presented, while critical discussion regarding their advantages and disadvantages is addressed.      

Detector comparison for sulfur and chlorine detection with laser induced breakdown spectroscopy in the near-infrared-region

Laser-induced breakdown spectroscopy has been employed for the investigation of the sulfur and chlorine content of building materials. Both, chloride and sulfate ions are major damaging species affecting the stability and lifetime of a structure. Chlorine and sulfur are mostly detected in the VUV and the NIR. In case of building materials the main elements like calcium or iron have many strong spectral lines over the whole spectral range, so that trace elements can only be detected in spectral windows unaffected from these lines. With regard to a preferably simply, robust against dust and vibrations and portable setup only the NIR spectral features are used for civil engineering applications.

Most detectors, mainly CCD cameras have rapidly decreasing quantum efficiency in the NIR. Also the quantum efficiency of the photocathode of CCD-Detectors with image intensifier is decreasing in the NIR. Different CCD-detectors were tested with respect to high quantum efficiency and high dynamic range, which is necessary for simultaneous detection of weak spectral lines from trace elements and intense spectral lines from main elements.

The measurements are made on reference samples consisting of cement, hydrated cement, cement mortar and concrete with well-defined amounts of the trace elements. Experimental conditions are chosen for an optimum intensity of the trace element spectral lines. The detector systems are compared by limit of detections and the signal to noise ratio.     

流动注射化学发光法测定自来水中二氧化氯

在pH12．5的NaOH—KCl缓冲介质中，ClO2直接氧化Luminol能产生很强的化学发光，而且发光强度在一定的范围内与ClO2的浓度呈线性关系，据此建立了流动注射化学发光测定ClO2的新方法。探讨了最佳的发光条件，测定ClO2的线性范围为0．5—200μg／L，检出限为0．3μg／L。本法简便、怏速、灵敏，选择性和重复性较好，应用于自来水中剩余ClO2的测定，结果满意。     

A new sensitive and selective fluorescence method for determination of chlorine dioxide in water using rhodamine S

A new simple, selective and sensitive method for the determination of trace chlorine dioxide in water has been developed, based on the oxidation by chlorine dioxide to reduction the fluorescence of rhodamine dyes in ammonia-ammonium chloride buffer solution. Four rhodamine dyes systems such as rhodamine S, rhodamine G, rhodamine B and butyl-rhodamine B were tested. The rhodamine S system is the best, with a linear range of 0.0060-0.450 μg mL⁻¹ and a detection limit of 0.0030 μg mL⁻¹ ClO₂. It was applied to the determination of chlorine dioxide in synthetic samples and real samples, with satisfactory results. This method has good selectivity, especially, other chlorine species such as chlorine, hypochlorite, chlorite and chlorate do not interfere the determination. The mechanism of fluorescence reduction was also considered.