Synthesis and characterization of segmented liquid crystal poly(azoxy polyester-co-polyoxypropylene)

In this study a series of a segmented copolyester, poly(4,4′-dioxy-2,2′-dimethyl-azoxybenzene dodecanedioyl) (PMABD)-co-polyoxypropylene 400 (POP), was prepared. The chain length of PMABD studied (n) was varied from 7.8-18.2, and that of POP was unchanged. The intrinsic viscosity of the segmented copolyesters was 1.04-1.30, and the number average molecular weight obtained was 2.53 × 10⁴?3.49 × 10⁴ g/mol. The mesophase texture and thermal properties of the segmented copolyesters were measured as functions of n. It was found that the insert of flexible POP between those liquid crystalline domains of PMABD did affect thermotropic properties of PMABD. As the n value was 9.0 and 7.8 (or 7.4 and 8.6% by weight POP) the texture appeared as cholesteric-like oily streaks. The effect could not be attained by simply copolymerizing a mesogenic moiety with a pair of spacers of different lengths. The fluidity and domain structure of the flexible dodecanedioyl-POP-dodcanedioyl segments are taken into account for the obtained results. © 1995 John Wiley & Sons, Inc.     

壳聚糖对鞣酸絮凝作用的研究

以壳聚糖为絮凝剂，采用絮凝法除去中药药液中的杂质。以鞣酸为研究对象，从鞣酸浓度，体系温度，ＰＨ絮凝剂用量粘均分子量等方面探讨其絮凝规律，用正交试验优化其絮凝条件，为实施中药药液的絮凝法精制工艺提供参考。     

中药片仔癀,六味地黄丸中的微量铬,铅和镉石墨炉原子吸收法测定

本文采用ＧＦ－ＡＡＳ加平台技术，基体改进剂，测定了中药片仔癀，六味地黄丸中铬、铅和镉的含量，铬、铅和镉的线性范围分别为０－０．８ｎｇ／ｍＬ，０－５０ｎｇ／ｍＬ，０－５ｎｇ／ｍＬ，回收率分别为１０２－１０３％，９９－１０１％，９７．５－９８％，本方法简便快速、准确。     

紫外分光光度法测定中草药中铁的含量

对白芍、党参、白术、茵陈、天冬、枸杞子、当归、菟丝子、金银花、桔梗中微量元素铁的含量进行了测定,为进一步研究其药理作用提供基础。中草药消化后配制成溶液,用邻二氮菲作显色剂,使用UV-1200型紫外分光光度计在510 nm处测定各样品的吸光度(A),求出样品中微量元素铁的含量。结果显示,当归和金银花中铁的含量较丰富,分别为(135.367 8±0.111 1)μg/g和(125.936 4±0.159 9)μg/g;桔梗含铁量最少,为(3.510 9±0.159 9)μg/g,10种中草药中铁含量有显著性差异(P<0.05)。结果为使用中草药治疗系统疾病提供了可靠数据,10种中草药在用量范围内Fe含量适合人体每天正常摄入量。     

Fast folding and comparison of RNA secondary structures

Summary Computer codes for computation and comparison of RNA secondary structures, the Vienna RNA package, are presented, that are based on dynamic programming algorithms and aim at predictions of structures with minimum free energies as well as at computations of the equilibrium partition functions and base pairing probabilities.An efficient heuristic for the inverse folding problem of RNA is introduced. In addition we present compact and efficient programs for the comparison of RNA secondary structures based on tree editing and alignment.All computer codes are written in ANSI C. They include implementations of modified algorithms on parallel computers with distributed memory. Performance analysis carried out on an Intel Hypercube shows that parallel computing becomes gradually more and more efficient the longer the sequences are.

---

Schnelle Faltung und Vergleich von Sekundärstrukturen von RNA

Zusammenfassung Die im Vienna RNA package enthaltenen Computer Programme für die Berechnung und den Vergleich von RNA Sekundärstrukturen werden präsentiert. Ihren Kern bilden Algorithmen zur Vorhersage von Strukturen minimaler Energie sowie zur Berechnung von Zustandssumme und Basenpaarungswahrscheinlichkeiten mittels dynamischer Programmierung.Ein effizienter heuristischer Algorithmus für das inverse Faltungsproblem wird vorgestellt. Darüberhinaus präsentieren wir kompakte und effiziente Programme zum Vergleich von RNA Sekundärstrukturen durch Baum-Editierung und Alignierung.Alle Programme sind in ANSI C geschrieben, darunter auch eine Implementation des Faltungs-algorithmus für Parallelrechner mit verteiltem Speicher. Wie Tests auf einem Intel Hypercube zeigen, wird das Parallelrechnen umso effizienter je länger die Sequenzen sind.

     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Genomic variation and point mutations analysis of Indian COVID-19 patient samples submitted in GISAID database

Corona virus disease 2019 (COVID-19) endemic has havoc on the world; the causative virus of the pandemic is SARS CoV-2. Pharmaceutical companies and academic institutes are in continuous efforts to identify anti-viral therapy or vaccines, but the most significant challenge faced is the highly evolving genome of SARS CoV-2, which is imparting evolutionary selective benefits to the virus. To understand the viral mutations, we have retrieved nine hundred and thirty-four samples from different states of India via the GISAID database and analyzed the frequency of all types of point mutation in all structural, non-structural proteins, and accessory factors of SARS CoV-2. Spike glycol protein, nsp3, nsp6, nsp12, N and NS3 were the most evolving proteins. High frequency point mutations were Q496P (nsp2), A380V (nsp4), A994D (nsp3), L37F (nsp6), P323L & A97V (nsp12), Q57H (ns3), D614G (S), P13L (N), R203K (N), G204R (N) and S194L (N).     

Mesoscopic structure and properties of liquid crystalline mesophase pitch and its transformation into carbon fiber

The history and present state of the art in the chemistry of mesophase pitch, which is an important precursor for carbon fiber and other high-performance industrial carbons, are reviewed relative to their structural properties. The structural concepts in both microscopic and macroscopic views are summarized in terms of the sp(2) carbon hexagonal plane as a basic unit common to graphitic materials, its planar stacking in clusters, and cluster assembly into microdomains and domains, the latter of which reflect the isochromatic unit of optical anisotropy. Such a series of structural units is described in a semiquantitative manner corresponding to the same units of graphitic materials, although the size and stacking height of the hexagonal planes (graphitic sheets) are very different. Mesophase pitch is a liquid crystal material whose basic structural concepts are maintained in the temperature range of 250 to 350 degrees C. The melt flow and thermal properties are related to its micro- and mesoscopic structure. The structure of mesophase-pitch-based carbon fiber of high tensile strength, modulus, and thermal conductivity has been formed through spinning, and has inherited the same structural concepts of mesophase pitch. Stabilization settles the structure in successive heat treatments up to 3000 degrees C. Carbonization and graphitization enable growth of the hexagonal planes and their stacking into units of graphite. Such growth is governed and controlled by the alignment of micro- and mesoscopic structures in the mesophase pitch, which define the derived carbon materials as nanostructural materials. Their properties are controlled by the nanoscopic units that are expected to behave as nanomaterials when appropriately isolated or handled.     

色谱技术在中药指纹图谱研究中的应用

 介绍了气相色谱、高效液相色谱、超临界流体色谱和高速逆流色谱等几种色谱技术在中药指纹图谱研究中的应用现状,以及使用模糊聚类分析和人工神经网络分析指纹图谱对中药进行模式识别和质量鉴定的方法。     

中药微量元素研究中若干热点课题

评进了当前中药徽量元素研究中的若干热点课题；1．微量元素与中药品种、产地的关系；2．微量元素与中药性味、归经，功效的关系；3．中药微量元素的存在状态；4．中药内有机成分与微量元素的相互关系；5．微量元素对中西药配伍的影响；6．微量元素的毒副作用．共引用文献29篇．