钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系测定钒

本文利用钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系建立了痕量钒的化学发光测定法。方法检出限是2×10~(-10)g/mL钒,线性范围是4×10~(-10)～1×10~(-7)g/mL钒,测定的相对标准偏差小于2%,考察了26种常见离子的干扰情况。方法已用于水样中痕量钒的测定。     

Analysis of nitriles at low parts per million levels by capillary gas chromatography

Two methods have been developed for the determination of trace levels of acetonitrile and propionitrile in light naphthas. One involves clean-up and preconcentration by medium pressure liquid chromatography (MPLC) in which nitriles are concentrated ten-fold while the complex hydrocarbon matris is removed. The concentrated solution is then analyzed by high resolution GC with flame ionization detection. The second method involves direct injection of samples into a capillary GC equipped with chemiluminescence nitrogen detection. The results and repeatability obtained from both methods are comparable. Preconcentration enables identification by GC-MS and simultaneous analysis of other polar species, with no need for selective detectors. Direct analysis is, on the other hand, much less time-consuming and requires less sample.     

Structural response of different Lewis number premixed flames interacting with a toroidal vortex

Simultaneous measurements of temperature, CH* and OH* chemiluminescent species are carried out to explore the impact of stretch rate and curvature on the structure of premixed flames. The configuration of an initially flat premixed flame interacting with a toroidal vortex is selected for the present study and reasons for this choice are discussed. Lewis number effects are assessed by comparing methane and propane flames. It is emphasized that the flame structure experiences very strong variations. In particular, the flame is shrunk (broadened) in the initial (final) period of the interaction with the vortex where strain rate (curvature) contribution of the stretch rate is predominant. By further analysing independently the thickness of the preheat and reaction zones, it is shown that for propane flames, not only the former but also the latter is significantly altered in zones where the flame curvature is negative. Changes in the reaction zone properties are further emphasized using CH* and OH* radicals. It is demonstrated that higher thermal diffusivity plays a significant role around curved regions, in which the enhanced diffusion of heat leads to a strong increase of CH* compared to OH* intensity. As an overall conclusion, this study suggests that it would be interesting to reassess the internal flame structure at lower and moderate Karlovitz numbers since changes might appear for a moderate vortex intensity with typical size much larger than the flame thickness.     

Chemiluminescence detection of superoxide anion release and superoxide dismutase activity: modulation effect of<Emphasis Type="Italic"> Pulsatilla chinensis</Emphasis>

A novel flow-injection chemiluminescence-based method has been developed for determination of superoxide dismutase (SOD) activity. An in-vitro superoxide anion generation xanthine/xanthine oxidase stable source was established on line with FIA/CL-detection apparatus, for measuring SOD activity. This method can detect SOD in the linear range of 0.002–2.00 U mL^–1 with a detection limit of 0.001 U mL^–1. Another method for detection of superoxide anion is based on the luminol–FeCl₃ chemiluminescence (CL) reaction. This method was used to evaluate superoxide release and SOD activity in rats treated with the traditional Chinese herb Pulsatilla chinensis, which resulted in high clearance of hepatitis B virus (HBV) after treatment of a hepatitis B patient. Interestingly, we found that treatment with Pulsatilla chinensis can specifically increase superoxide release by liver tissues and, at the same time, slightly increase extracellular SOD (ECSOD) activity in plasma; in particular it can markedly increase MnSOD activity in mitochondria in liver tissue. This work revealed a possible mechanism whereby Pulsatilla chinensis prevents possible infection (for example HBV) by specifically increasing superoxide release in the liver and increasing MnSOD activity to minimize superoxide-mediated toxicity.     

Electrochemical stripping voltammetry of gold ions for development of ultra-sensitive immunoassay for chlorsulfuron

The paper reports a highly sensitive enzyme free electrochemical immunoassay (EFEIA) for the detection of herbicide chlorsulfuron. The assay is based upon oxidative gold nanoparticle (GNP) dissolution in an acidic solution. The consequent release of large amounts of gold (Au) metal ions after dissolution of gold nanoparticles tagged to antibody leads to the development of sensitive stripping voltammetry based immunoassay. The detection is made possible by the reduction of Au^3 + ions at the screen printed electrode surface followed by metal analysis by using the square wave voltammetry technique. The sensitivity of chlorsulfuron detection by competitive assay procedure was 6.7 pg mL^− 1 for EFEIA in marked contrast to optical detection using Standard ELISA procedure that gives a sensitivity of 4.97 ng mL^− 1.     

参比型SPR生物芯片的检测

参比型SPR生物芯片是一种具有参比、检测两个位点的葡聚糖修饰的SPR生物芯片。为了验证该芯片的效果，进行了在芯片上固定人IgG，检测溶液中的羊抗人IgG的免疫结合试验。参比位点的SPR信号随溶液的变化而变化，但不会固定人IgG，检测位点可以牢固地固定人IgG。羊抗人IgG可以与固定在芯片上的人IgG发生免疫结合反应。这种方法可用来进行固定抗原检测抗体的研究。     

Determination of medroxyprogesterone acetate residues by CE immunoassay with chemiluminescence detection

A rapid and simple method is developed for the determination of medroxyprogesterone acetate (MPA) by CE immunoassay with chemiluminescence (CL). This method is based on the competitive reactions between horseradish peroxidase (HRP)-labeled MPA (MPA-HRP) and free MPA with anti-MPA antiserum. The influencing factors on the electrophoresis and CL detection were studied completely and the optimal conditions of separation and determination were obtained. The linear range was 2.0-50 nmol/L and the LOD for MPA was 0.9 nmol/L. The present method was applied to the analysis of pork tissues.     

Determination of chlorogenic acid and rutin in cigarettes by an improved capillary electrophoresis indirect chemiluminescence system

An improved capillary electrophoresis indirect chemiluminescence system was employed for the determination of chlorogenic acid and rutin in cigarette samples. After being separated by capillary electrophoresis, the analyte zones were determined by indirect chemiluminescence of luminol-potassium hexacyanoferrate. In this system, luminol was added into running buffer solution and introduced at the head of separation capillary, and potassium hexacyanoferrate was introduced at the end of the capillary. A high potential buffer reservoir was constructed from a running buffer cell and an electrode buffer one, which were jointed with a frit, in order to avoid luminol electrolysis in high potential reservoir and the excursion of chemiluminescence baseline. A low potential flow reservoir was used to prevent electrode buffer solution from the contamination of chemiluminescence waste. Therefore, the proposed capillary electrophoresis-chemiluminescence system can avoid the electrolysis of chemiluminescence reagent, retain the stability of chemiluminescence baseline and prolong the working time of running and electrode buffer solutions. In addition, the matrix of cigarette sample solutions has also an inhibitory effect on the chemiluminescence intensity in the indirect detection, whereas the influence was not observed in the separation of standard solutions. After the correction of matrix inhibition and the calibration with standard addition method, chlorogenic acid and rutin were determined in four cigarette samples by the improved capillary electrophoresis-chemiluminescence system.     

以2-磷酸抗坏血酸酯为底物检测碱性磷酸酯酶的微分脉冲伏安法

提出以2_磷酸抗坏血酸酯为碱性磷酸酯酶(ALP)底物微分脉冲伏安法测定ALP的方法 ;2_磷酸抗坏血酸酯在ALP的催化作用下发生水解反应生成抗坏血酸 ,抗坏血酸在玻碳电极上 +0.40V(vsAg/AgCl)被氧化而产生一个灵敏的氧化峰 ,氧化峰电流随着酶浓度的增大而增大 ,借助此氧化峰电流可以测定ALP ,进而可用于以ALP为标记酶的酶免疫分析 ;用微分脉冲伏安法对酶催化反应条件和酶催化反应产物的测定条件进行了详细的研究 ,建立了以2_磷酸抗坏血酸酯为底物的伏安酶联免疫分析新体系 ,测定游离ALP的线性范围是0.4～2.0×103 U/L,检测限为0.3U/L,对游离的IgG_ALP的测定最大稀释比为1∶200000。     

Flow Injection Chemiluminescence Method for Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Tris(2,2'-bipyridyl)ruthenium(II) Chloride-diperiodatocuprate(III) Reaction

Asensitive and selective method employing chemiluminescence(CL) coupled with flow injection(FI) is reported for nalbuphine hydrochloride(NAL) assay in pharmaceutical formulations. The enhancement effect of NAL on the CL reaction between tris(2,2'-bipyridyl)ruthenium(II) chloride-diperiodatocuprate(III) {Ru[(bpy)₃]²⁺-Cu(III) complex} in acidic medium is used as analytical measurement. The optimal conditions of the CL reaction were sulfuric acid 1.0×10^-3 mol/L, Ru[(bpy)₃]²⁺ 7.5×10^-5 mol/L, Cu(III)/Ag(III) complexes 4.0×10^-4/5.0×10^-4 mol/L, sample loop volume of 120 μL and flow rate of 2.5 mL/min. The sensitivities of the method in terms of detection(S/N=3) and quantification(S/N=10) limits are 5×10^-4 and 0.001 ppm(1 ppm=1 mg/L), respectively. The linear response of the instrument in the form of CL intensity with respect to NAL concentration is over the range 0.001-15.0 ppm(R²=0.9999) with relative standard deviation from 0.8% to 3.2% and injection throughput of 120 injection/h. The applications of the method include the quantitative analysis of NAL in pharmaceutical injection samples. Variations and the average results of the proposed method are not signi-ficantly different from the results of a reported method by applying F- and paired student t-test. The most likely CL reaction mechanism is written in accordance with spectrophotometric and CL studies.