Organometallic L-Alanine Cadmium Iodide Crystals for Optical Device Fabrication

Single crystals of L-alanine cadmium iodide (LACI) were grown by the slow evaporation technique at room temperature. A single-crystal X-ray diffraction (SXRD) model was used to evaluate the crystal structure of the as-grown LACI crystal. The energy dispersive X-ray (EDX) analysis and ultraviolet-visible-near infrared (UV-vis-NIR) transmittance studies were carried out, and the results reveal the presence of elements in the title compound. From the transmittance data, the optical bandgap as a function of photon energy was estimated, and the different optical constants were calculated. A fluorescence study was performed for the LACI crystal. Thermogravimetric and differential thermal analyses have also been studied to investigate the thermal property of the LACI crystal. The efficiency of the second harmonic generation (SHG) of the title crystal was investigated. The magnetic and electrical properties were estimated by the vibrating sample magnetometer (VSM) analysis and impedance study, respectively.     

一种加载铁氧体磁环的高功率宽带巴伦

针对高功率天线的差分馈电和阻抗匹配问题,文中提出了一种基于同轴线结构加载铁氧体磁环的宽 带巴伦模型。双同轴线具有阻抗变换功能和较好的功率承载能力,铁氧体磁环改善了巴伦在低频时的输入匹配和 两个输出端口不平衡度。仿真和实测表明,此巴伦在0. 05~1. 24 GHz 内回波损耗低于-10 dB,去除3. 0 dB 系统插损 后单端插入损耗在1. 5 dB 以内,两端输出的相位不平衡度在5°以内,幅度不平衡度在2%以内。通过分析巴伦的电 磁热损耗场、温度场和应力形变场,验证了巴伦在高功率馈电下的工作性能,结果表明此巴伦在工作频带内能够承 受500 W 的功率。     

谐振器加载石墨烯的双通带可调滤波衰减器设计

石墨烯材料在微波段的阻抗可控特性是其最有价值的应用特性之一。文中首次分析了石墨烯对微带 多模谐振的影响机理,提出了一种集成滤波衰减功能为一体的灵活可控器件。首先,对不同位置加载石墨烯的微带双 模谐振器进行了严格的等效电路建模,通过奇偶模分析法及输入导纳参数计算,探究了双模谐振受石墨烯阻抗及其加 载位置的影响,明晰了石墨烯材料对微波谐振器的影响。随后设计了动态可调的滤波衰减器并阐述了石墨烯材料在谐 波控制上的潜在应用点。最后,采用不同尺寸的双模谐振器进行石墨烯加载并完成双通带幅度独立可控的滤波衰减器 的设计,仿真与实测结果吻合良好,验证了阻抗可控石墨烯材料在可调微波衰减类器件上的应用前景。     

A Systematic Evaluation of Polyurethane as a Conformal Coating for the Inhibition of Corrosion on Electronic Components

The corrosion of printed circuit boards can be effectively prevented with a polyurethane conformal coating. In this study, the protective performance of PU coating was investigated systematically through electrochemical measurements and simulated exposure/immersion tests. Some fungi tests were also included. All experimental results show that a polyurethane coating effectively inhibits corrosion on printed circuit boards. The optimal thickness of the coating film should be about 60 μm. Long-term exposure tests showed that this coating material could preserve the reliability of the investigated printed circuit boards for more than 400 days in a 90% relative humidity environment at 25°C.     

多相高分子快离子导体阻抗谱的研究

研究了以ＬｉＣｌＯ４掺杂的聚乙二醇聚氨酯双离子导体及磺酸型聚乙二醇聚氨酯离聚物单一离子导体的阻抗谱，给出了多相快离子导体交流阻抗测试系统的等效电路．通过阻抗谱计算机解析，计算得出了样品的基本电学参数．通过讨论界面阻抗的色散现象，计算出样品的离子电导率，和阻抗谱解析法得到的结果相一致．     

旋转铂盘电极上Cu(phen)_2~(2 )与6-巯基嘌呤的相互作用

在Tris-NaC1*(pH=7.2)缓冲溶液中,应用循环伏安法,微分脉冲伏安法、旋转圆盘电极实验、交流阻抗法及其数据模拟等技术研究了Cu(phen)2 25(phcn=1.10-邻菲咯啉)与6-巯基嘌呤(6-MP)的相互作用.结果显示.Cu(phen)2 2MP与6-MP无论在扩散控制过程或电化学控制过程都发生了相互作用.Cu(phen)2 2及其与6-MP的作用产物于铂电极上均呈现一对氧化还原峰,但后者呈现的氧化还原峰负移.峰电流减小.交流阻抗结果显示,无论6-MP存在与否,Cu(phen)2 2在交流阻抗谱上均呈现两个清晰的电容弧,但当6-MP存在时,电化学反应电阻和电化学吸脱附电阻均增大.Cu(phen)2 2在不同转速下的阻抗拟合结果显示.随转速增大.电化学反应电阻和电化学吸脱附电阻均减小.双电层电容呈增大趋势,而吸脱附电容呈减小趋势:当6-MP存在时.仍然呈现此变化规律.     

热导式热量计特征热谱方程的建立

Based on the interfacial model of a conduction calorimeter, a characteristic thermogram equation is suggested in this paper. Measurements of only two quantities such as the maximum peak height △m and its time tm, enables us to calculate the peak height at any interval by using this model. Thermograms of alkaline hydrolysis of ethyl propionate and ethyl acetate have been measured at 25℃, respectively. The themographic data calculated by using the characteristic thermogram equation are in reasonable agreement with those read from the thermograms.     

EHMO和模式识别法研究芬太尼衍生物的构效关系

自Hansch等创立QSAR法以来,药物构效关系的研究已获得较大的进展。本文将模式识别法用于芬太尼衍生物构效关系的研究,将该类药物的分子结构看作与生物活性具有对应关系的表现形式——模式,以药物分子结构中有关取代基的多个量子化学参数为数量化的模式向量成分。将已知生物活性的药物作为模式识别训练点,则所得模式识别分类图反映了该类药物的生物活性与其量子化学结构特征参数间的统计学意义的关系。它既可用来探寻高效药物的结构参数,又能预测新设计药物生物活性的等级或类别。     

All Solid‐State pH Electrode Based on Titanium Nitride Sensitive Film

Titanium nitride was used as pH‐sensitive material to fabricate all solid‐state pH electrode. The fabrication and the response performance of the pH electrode were described in the paper. The TiN film electrode showed a linear response in the pH range of 2–12 with a near‐Nenstian response (?55 mV/pH). The response time was within 1 min, and the electrode had good reproducibility, stability and low sensitivities for different species. Compared with the glass pH electrode, the electrode exhibited some advantages, for example, without activation, rapid response and high mechanical strength. In addition, the electrode performed excellently in a corrosion medium containing F^?(1 M). Electrochemical behaviors of TiN electrode in Britton‐Robinson buffers were studied with Electrochemical Impedance Spectroscopy (EIS).     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.