Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

石墨炉原子吸收光谱无标样分析法的研究：Ⅰ.消除基体干扰

实现石墨炉原子吸收光谱绝对分析必须消除基体干扰，本研究采用有机基体改进剂，管壁原子化、热解涂层石墨管，峰面积积分吸收信号，Ｄ２灯或Ｚｅｅｍａｎ效应扣除背景，有效地控制和消除了海水基体对Ａｓ，Ｃｄ，Ｃｏ，Ｃｒ，Ｃｕ，Ｍｎ，Ｎｉ，Ｐｂ和Ｖ等元素的干扰，实现了无干扰测定。     

Electrochemical synthesis, characterization and some properties of a polymer derived from thioflavin S

Polymeric films derived from thioflavin S were electrosynthesized on mild steel and silver electrodes in sulfuric acid and lithium perchlorate-containing aqueous solutions. The introduction of thioflavin S in an acidic solution protected the surface of steel from corrosion. The electrochemical behavior of the steel coated with a layer of poly(thioflavin) was examined by electrochemical impedance spectroscopy. The films exhibited a capacitive behavior and were semi-conductive in nature. Infra red reflectance measurements of the polymer films at the steel surface showed that the polymer structure retained the aromatic structure of the benzene and thiazole rings with the distinction of a nitrogen quinone vibrational band. Surface morphology of the polymer film was examined with scanning electron microscopy. The films are yellow, compact and dense when electrochemically formed onto steel surfaces when compared to a blue rather porous when formed onto silver electrode. The mechanism of electropolymerization of thioflavin is given and found similar to that of aniline with the possibility of metal chelation with the sulfur and/or nitrogen in the thiazole ring.     

用CR传输线模型研究涂层/金属体系阻抗谱

根据CR传输线模型和QR电路之间的关系,建立了拟合其初值的计算方法,借助Z-View软件,可求得各元件精确值.根据电容（Ci）和电阻（Ri）随特征频率（f*）的分布,推导了元件相对增量与恒相位角元件（Q）指数参数n的关系. 结果表明, 当n小于0.5时,Ci比Ri增加得更快,从新的角度说明了n的物理意义及其和界面脱层之间的关系.作为应用实例,拟合了不同特征的电化学阻抗谱,分析了有机涂层/金属腐蚀体系阻抗变化的具体过程,区分了点蚀和脱层因素对阻抗谱的影响,从高阻抗体系同时得到了与不同空隙率有关的涂层电容和电阻值,并根据涂层体系的不均匀特征探讨了模型结构的物理意义.     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

碳纳米管电极超大容量离子电容器交流阻抗特性

采用碳纳米管作为超大容量离子电容器的电极材料,应用交流阻抗频谱法,研究了超大容量离子电容器的频率响应特性.结果表明,用碳纳米管块作电极,超大容量离子电容器在频率250 mHz以下出现“电荷饱和”；而用活性炭块作电极, 超大容量离子电容器在频率为100 mHz时仍未出现“电荷饱和”,这说明碳纳米管电极超大容量离子电容器的频率响应特性优于活性炭电极超大容量离子电容器的频率响应特性.上述两类超大容量离子电容器的阻抗谱中均出现倾角约为45°的直线段,其相位角均远小于理想电容器的相位角90°.     

Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

On the Criteria of Instability for Electrochemical Systems

Both cyclic-voltammetry-based and impedance-based experimental criteria that have been developed recently for the oscillatory electrochemical systems are critically appraised with two typical categories of oscillators.Consistent conclusions can be drawn by the two criteria for the category of oscillators that involve the coupling of charge transfer mainly with surface steps(e.g.ad-and desorption)such as in the electrooxidation of C1 organic molecules.Whereas,impedance-based criterion is not applicable to the category of oscillators that involve the coupling of charge transfer mainly with mass transfer(e.g.diffusion and convection) such as in the Fe(CN)6^3- reduction accompanying periodic hydrogen evolution.The reason is that the negative impedance cannot include the feedback information of convection mass transfer induced by the hydrogen evolution.However,both positive and negative nonlinear feedbacks,i.e., the diffusion-limited depletion and convection-enhanced replenishment of the Fe(CN)6^3- surface concentration,that coexist between the bistability,i.e.,Fe(CN)6^3- reduction with and without hydrogen evolution at lower and higher potential sides respectively,are all reflected in the crossed cyclic voltammogram(CCV).It can be concluded that the voltammetry-based criterion(in time domain)is more intuitive,less time-consuming and has a wider range of applications than the impedancebased one (in frequency domain).     

Ka频段高灵敏度检波器研制

介绍了一种高电压灵敏度、低切线灵敏度检波器的设计方法。在建立检波二极管简化物理模型的基础上,进行了检波二极管Ka频段阻抗参数的提取,再根据提取的阻抗参数,通过仿真优化了射频匹配网络,使得检波器能够较好地工作在23～34 GHz。实测表明,在1.2 kHz视频带宽下,当输入功率为-30 dBm时,23～34 GHz范围内电压灵敏度高于6 000 mV/mW,切线灵敏度优于-56 dBm,对应等效噪声功率(Noise Equivalent Power, NEP)估算为11.5～36 pW/Hz^1/2。对比实测与仿真结果较为一致,证明了阻抗参数提取的有效性。