Price competition and store competition: Store brands vs. national brand

This paper studies pricing strategies in a market channel composed of one national brand manufacturer and two retailers who, each, carry their own store brand and a national brand products. The model accounts for product competition between store brands and the national brand products, as well as for store competition between retailers.     

基于碳化硅衬底的宽禁带半导体外延

宽禁带半导体具备禁带宽度大、电子饱和飘移速度高、击穿场强大等优势,是制备高功率密度、高频率、低损耗电子器件的理想材料。碳化硅(SiC)材料具有热导率高、化学稳定性好、耐高温等优点,在SiC衬底上外延宽禁带半导体材料,对充分发挥宽禁带半导体材料的优势,并提升宽禁带半导体电子器件的性能具有重要意义。得益于SiC衬底质量持续提升及成本不断降低,基于SiC衬底的宽禁带半导体电子市场占比呈现逐年增加的态势。在SiC衬底上外延生长高质量的宽禁带半导体材料是提高宽禁带半导体电子器件性能及可靠性的关键瓶颈。本文综述了近年来国内外研究者们在SiC衬底上外延SiC、氮化镓(GaN)、氧化镓(Ga₂O₃)所取得的研究进展,并展望了SiC衬底上宽禁带半导体外延的发展及应用前景。     

802．11无线局域网中AP放置与信道配置的联合算法

在多小区无线局域网规划中,接入访问点(AP)放置与信道配置是两个重要的任务。在给定用户业务需求的条件下,谋求最大系统吞吐率和资源分配的公平性是网络规划的目标,其中公平性由吞吐率均衡因子表征。在传统的规划策略中,AP放置与信道配置被分割为两个先后的步骤;而该文提出的目标函数则将这两个问题联合解决以得到更好的系统性能。当采用全局遍历时,对目标函数寻求全局最优解计算量庞大;因此该文又提出了一种有效的局部最优解搜索算法补丁算法,此算法计算量小,同时能较好地逼近全局最优解。     

带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

数据传输链路中几种纠错编译码的算法和性能

介绍数据传输中常用的戈莱码的几种不同译码算法，分析各种算法的纠错性能，给出用计算机模拟的结果。还介绍对数据链Ｌｉｎｋｌ中的纠错码和地址码的编译码算法，分析其性能，给出计算机模拟的结果。     

Design and analysis of two-dimensional photonic crystals channel filter

A novel three-port channel add/drop filter consisting of two waveguides and two cavities is proposed. One is used for a resonant tunneling-based channel add/drop operation from the bus waveguide to the add/drop waveguide, while the other is used to realize the wavelength-selective reflection feedback in the bus waveguide. By means of coupled mode theory in time, the conditions to achieve 100% add efficiency are derived thoroughly. Based on these theoretical analysis, the channel add filter and some other multi-channel filters are designed in two-dimensional photonic crystals (2D PCs) with square lattice of dielectric rods in air. The numerical results by using the finite-difference time-domain (FDTD) method demonstrate almost complete channel add/drop tunneling at resonance via the three-port systems.     

Multipath channel identification by using global optimization in ambiguity function domain

A new transform domain array signal processing technique is proposed for identification of multipath communication channels. The received array element outputs are transformed to delay-Doppler domain by using the cross-ambiguity function (CAF) for efficient exploitation of the delay-Doppler diversity of the multipath components. Clusters of multipath components can be identified by using a simple amplitude thresholding in the delay-Doppler domain. Particle swarm optimization (PSO) can be used to identify parameters of the multipath components in each cluster. The performance of the proposed PSO-CAF technique is compared with the space alternating generalized expectation maximization (SAGE) technique and with a recently proposed PSO based technique at various SNR levels. Simulation results clearly quantify the superior performance of the PSO-CAF technique over the alternative techniques at all practically significant SNR levels.     

From defects creation to circuit reliability - A bottom-up approach (invited)

This paper presents a theoretical framework about interface states creation rate from Si-H bonds at the Si/SiO₂ interface. It includes three mains ways of bond breaking. In the first case, the bond can be broken thanks to the bond ground state rising with an electrical field. In the two others cases, incident carriers will play the main role either if there are very energetic or very numerous but less energetic. This concept allows us physically modeling the reliability of MOSFET transistors, and particularly NBTI permanent part, and Channel Hot Carrier (CHC) to Cold Carrier (CCC) damage. Finally, the translation of these physical models into reliability spice models is discussed. These models pave the way to Design-in Reliability (DiR) approach which seeks to provide a quantitative assessment of reliability - CMOS device reliability in this case - at design stage thereby enabling judicious margins to be taken beforehand.     

AN IMPROVED EPON UPSTREAM TRANSMISSION SCHEME WITH ZERO INTER-PERIOD IDLE LOSS

Existing Ethernet Passive Optical Network (EPON) Dynamic Bandwidth Allocation (DBA) algorithms suffer from the disadvantage of idle time loss,which lower the upstream bandwidth utilization.This letter ...     

Reducing channel change delay in IPTV by predictive pre-joining of TV channels

One of the major concerns of IPTV network deployment is channel change delay (also known as zapping delay). This delay can add up to 2 s or more, and its main culprits are synchronisation and buffering of the media streams. Proving the importance of the problem is the already significant amount of literature addressing it. We start this paper with a survey of techniques proposed to reduce IPTV channel change delay.Then, by analysing an extensive dataset from an operational IPTV provider - comprising 255 thousand users, 150 TV channels, and covering a 6-month period - we have observed that most channel switching events are relatively predictable: users very frequently switch linearly, up or down to the next TV channel. This fact motivated us to use this dataset to analyse in detail a specific type of solutions to this problem, namely, predictive pre-joining of TV channels. In these schemes each set top box (STB) simultaneously joins additional multicast groups (TV channels) along with the one that is requested by the user. If the user switches to any of these channels the switching latency is virtually eliminated, not affecting therefore user's experience.We start by evaluating a simple scheme, where the neighbouring channels (i.e., channels adjacent to the requested one) are pre-joined by the STB during zapping periods. Notwithstanding the simplicity of this scheme, trace-driven simulations show that the zapping delay can be virtually eliminated for a significant percentage of channel switching requests. For example, when sending the previous and the next channel concurrently with the requested one, for only 1 min after a zapping event, switching delay is eliminated for close to half of all channel switching requests. Importantly, this result is achieved with a negligible increase of bandwidth utilisation in the access link. Other more complex schemes where user behaviour is tracked were also evaluated, but the improvement over the simple scheme was insignificant.