基于异面交会的空中运动目标定位算法及误差分析

介绍了空中运动目标定位测量的经纬定位仪单站定向和双站异面交会定位原理,并对影响定向和定位结果的各个因素进行了误差分析和仿真.结果表明,交会角在[40°,165°]时.测量精度有明显地改善,为组网测量布站提供了依据.黑火药爆炸试验测量结果验证了该方法的可行性和测量精度.     

Performance of two-hop infrastructure based multi-antenna regenerative relaying in Rayleigh fading channel

Cooperative relaying is considered as an effective technique to enlarge the coverage area and enhance the system capacity for the future wireless systems. In this paper, an infrastructure based multi-antenna cooperative relay network has been investigated. Closed form expressions of outage probability and average error rate have been derived, when the relay and the destination perform selection combining of the signals. The relay is assumed to operate in the adaptive decode and forward mode. The effect of number of antennas installed on the relay and their placement has also been studied.     

基于DSP的高功率TEACO2激光器控制系统的高精度数据采集

针对基于DSP的高功率TEA CO2激光器控制系统直接利用DSP F2812内置A/D转换器（ADC）进行模拟量采样时存在转换误差较大,且模拟量易受电磁干扰等问题,从硬件和软件两个角度提出了校正DSP2812内置ADC的方法。硬件上采用硬件模拟滤波和隔离等手段对输入的模拟量进行处理;软件校正则通过将两路给定的参考电压值送入DSPF2812内置A/D转换器的两个转换通道,计算出ADC的偏置误差和增益误差,以此误差对其它通道A/D转换器进行校正。最后,实验分析了参考电压和A/D采样时钟频率对A/D转换精度的影响。结果表明,提出的方法能有效地提高A/D转换器的精度,A/D转换误差达到±3 LSB,特别是在对腔压值精度要求很高的0～12 000 Pa区段,A/D转换精度达±1 LSB,可以保证TEA CO2激光器的可靠运行。     

Design and construction of multicrystal analyser detectors using Rowland circles: application to MAD26 at ALBA

A concept is given for describing multicrystal analyser detectors (MADs), as they are in use for synchrotron powder diffraction, on the basis of the Rowland circle construction. The Rowland circle is typically used to describe focusing geometries and can be adapted for the case of MADs working at a single energy as well as in a limited energy range. With this construction it is also possible to quantify and optimize the walk of the beam along non‐central crystals which is inevitable in certain detector designs. The results of this geometrical inspection are correlated with a real detector design that is implemented at the ALBA synchrotron facility in Spain. An error budget is given to estimate the influence and amount of tolerance of the manufacturing process.     

三类构型激光脉冲压缩器光栅拼接误差容限比较

建立了包含拼接光栅的三类典型构型(双程Z型、X型及菱型)激光脉冲压缩器的理论模型. 利用光线追迹法计算压缩器引入的相位变化,结合傅里叶变换的方法仿真分析并比较了各压缩器相应的光栅拼接误差容限. 以远场焦斑峰值能量下降到理想值的0.9倍为限确定了三类压缩器光栅拼接误差容限,明确了不同构型激光脉冲压缩器对拼接误差的敏感程度. 这对脉冲压缩器的选型和设计具有指导意义. 关键词： 光栅拼接 脉冲压缩 误差容限 光线追迹     

Mechanical characterization of polytetrafluoroethylene polymer using full-field displacement method

The aim of this work is to estimate two important material properties of the polytetrafluoroethylene (PTFE) polymer by means of a single experimental test. The displacement fields around a crack tip are used for estimating the modulus of elasticity (or, Young's modulus) and Poisson's ratio. These parameters are evaluated by fitting linear fracture mechanic expression of displacement fields in the vicinity of the crack, for mode I, to the experimental data. Measurements of these displacements are carried out using digital image correlation (DIC) method. In this way, the experimental procedure is conducted by loading a double-edge-cracked plate specimen. In order to validate the results, two available experimental tests have been performed. The modulus of elasticity is determined by means of the tensile test, using a standard test machine. Moreover, the Poisson's ratio is obtained by measuring lateral compressive and longitudinal extensional strain using DIC method.     

Risk estimation of infectious diseases determines the effectiveness of the control strategy

Usually, whether to take vaccination or not is a voluntary decision, which is determined by many factors, from societal factors (such as religious belief and human rights) to individual preferences (including psychology and altruism). Facing the outbreaks of infectious diseases, different people often have different estimations on the risk of infectious diseases. So, some persons are willing to vaccinate, but other persons are willing to take risks. In this paper, we establish two different risk assessment systems using the technique of dynamic programming, and then compare the effects of the two different systems on the prevention of diseases on complex networks. One is that the perceived probability of being infected for each individual is the same (uniform case). The other is that the perceived probability of being infected is positively correlated to individual degrees (preferential case). We show that these two risk assessment systems can yield completely different results, such as, the effectiveness of controlling diseases, the time evolution of the number of infections, and so on.     

基于光电准直虚拟扩展成像的姿态角测量系统的误差分析

建立了基于光电准直原理的姿态角测量系统,提出一种虚拟扩展成像面技术,应用于测量系统中,对图像传感器成像面进行复用,虚拟扩大系统的测量视场.介绍了系统的主要工作原理,在系统模型下,对可能影响系统测量精度的误差源进行了分析,建立其数学关系,对精度影响因素进行了定量仿真实验.按照仿真结果,对系统设计方案进行了分析验证.结果表...     

结构光测量相位波动误差补偿方法研究

在计算机仿真分析投影仪伽马非线性特性对包裹相位波动误差影响的基础上,提出一种面向相移结构光测量的相位波动误差补偿方法.该方法采用二次多项式最小二乘拟合的方法近似输出条纹光强分布,实现包裹相位波动误差的补偿,减小投影仪非线性导致的系统测量误差.此方法简单,运算量小,不依赖环境光源及投影仪、摄像机具体参数,具有很强的通用性...