Wide Range Control of Microstructure and Mechanical Properties of Carbon Nanotube Forests: A Comparison Between Fixed and Floating Catalyst CVD Techniques

Vertically aligned carbon nanotube (CNT) forests may be used as miniature springs, compliant thermal interfaces, and shock absorbers, and for these and other applications it is vital to understand how to engineer their mechanical properties. Herein is investigated how the diameter and packing density within CNT forests govern their deformation behavior, structural stiffness, and elastic energy absorption properties. The mechanical behavior of low‐density CNT forests grown by fixed catalyst CVD methods and high‐density CNT forests grown by a floating catalyst CVD method are studied by in situ SEM compression testing and tribometer measurements of force‐displacement relationships. Low‐density and small‐diameter CNT columns (fixed catalyst) exhibit large plastic deformation and can be pre‐deformed to act as springs within a specified elastic range, whereas high‐density and large‐diameter CNT columns (floating catalyst) exhibit significant elastic recovery after deformation. In this work the energy absorption capacity of CNT forests is tuned over three orders of magnitude and it is shown that CNT forest density can be tuned over a range of conventional foam materials, but corresponding stiffness is ～10× higher. It is proposed that the elastic behavior of CNT forests is analogous to open‐cell foams and a simple model is presented. It is also shown that this model can be useful as a first‐order design tool to establish design guidelines for the mechanical properties of CNT forests and selection of the appropriate synthesis method.     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Effect of processing temperature on growing bamboo-like carbon nanotubes by chemical vapor deposition

The present article demonstrates a simple, eco-friendly route for the fabrication of carbon nanotubes (CNTs) with different morphologies, including the fascinating bamboo-like structures without complex catalyst/support preparation procedures. A thermal chemical vapor deposition (CVD) technique that utilized natural pozzolan supports and a solid carbon source, that is, a mixture of camphor and ferrocene in a weight ratio of 20:1, was carried out at different temperatures where the ferrocene played also the role of catalyst. The pozzolan chemical composition and mineral identification were determined by energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. The morphology of the fabricated CNTs was studied via scanning and transmission electron microscopies (SEM and TEM). It was revealed that both conventional tubular and bamboo-like nanotubes grow at 750 °C while the bamboo-like morphology prevails at 850 °C. The better nanostructure uniformity at higher deposition temperature was accompanied by an improved nanotube graphitization degree that was verified by Raman spectroscopy. Yet, the reduction of the CNTs production yield was recorded by thermogravimetric analysis (TGA). The experimental data are interpreted and discussed as an interplay between the CNTs processing temperature, morphology and growth mechanism. Thus, the growth of either tubular or bamboo-like nanostructures is suggested to be ruled by the competitive surface and bulk diffusions of carbon onto and into the catalyst surface. The growth depends on the size of catalyst nanoparticles sintered at different temperatures. The favorable role of the pozzolan supporting materials in the formation of bamboo-like tubes is emphasized.     

Benefits of Anthocyanin-Rich Black Rice Fraction and Wood Sterols to Control Plasma and Tissue Lipid Concentrations in Wistar Kyoto Rats Fed an Atherogenic Diet

Background: This study reports on the relative effects of administrating a cyanidin-3-O-glucoside-rich black rice fraction (BRF), a standardized wood sterol mixture (WS), and a combination of both to lower plasma and target tissue lipid concentrations in Wistar Kyoto (WKY) rats fed atherogenic diets. Methods: Male WKY (n = 40) rats were randomly divided into five groups, which included a nonatherogenic control diet and atherogenic diets that included a positive control and atherogenic diets supplemented with BRF or WS, respectively, and a combination of both BRF + WS. Plasma and target tissue liver, heart and aorta cholesterol, and triacylglycerides (TAG) content were also measured. Results: Rats fed atherogenic diets exhibited elevated hyperlipidemia compared to counterparts fed nonatherogenic diets (p < 0.001); this effect was mitigated by supplementing the atherogenic diets with BRF and WS, respectively (p < 0.05). Combining BRF with WS to enrich the supplement lowered cholesterol similar to the WS effect (p < 0.05) and lowered TAG characteristic to the BRF effect (p < 0.05). Conclusions: Rats fed diets containing BRF or WS effectively mitigate the hypercholesterolemia and elevated TAG induced by feeding an atherogenic diet. The benefit of adding BRF + WS together is relevant to the lipid parameter measured and is target tissue-specific.     

Polymerization of 2,4-hexadiyn-1,6-diol by chemical vapor deposition

2,4-Hexadiyn-1,6-diol (HDO) was polymerized on glass and silicon plates by chemical vapor deposition without transition metal catalysis to form homogeneous thin films. Structural properties of the films were investigated by FT-IR, UV-visible, Raman, x-ray diffraction, and XPS spectroscopic analyses. The structure of CVD-polymerized HDO (CVD-PHDO) films was different from that of metathesis polymerized HDO (metathesis-PHDO), showing a polyacene-based structure but no polyene structure with acetylenic side groups. © 1996 John Wiley & Sons, Inc.     

Filament-activated chemical vapour deposition of nitride thin films

We have applied the novel method of hot filament-activated chemical vapour deposition (HFCVD) for low-temperature deposition of a variety of nitride thin films. In this paper the results from our recent work on aluminium, silicon and titanium nitride have been reviewed. In the HFCVD method a hot tungsten filament (1500–1850°C) was utilised to decompose ammonia in order to deposit nitride films at low substrate temperatures and high rates. The substrate temperatures ranged from 245 to 600°C. The film properties were characterised by a number of analytical and optical methods. The effect of various deposition conditions on film properties was studied. All the films obtained were of high chemical purity and had very low or no detectable tungsten contamination from the filament metal.     

多孔氧化铝模板催化制备定向碳纳米管阵列

Well-aligned open-ended multi-walled carbon nanotube (MWCNT) arrays were prepared via chemical vapor deposition (CVD) method in porous anodic aluminum oxide (AAO) templates without depositing any transition metals as catalyst. Effects of the CVD temperature and heat treatment were studied in detail.Well-aligned open-ended MWCNT arrays were obtained at the CVD temperature above 600 ℃; when CVD temperature is reduced to around 550 ℃, CNTs, CNFs and other structures existed at the same time; no CNTs or carbon nanofibres (CNFs) could be found as the CVD temperature is below 500 ℃, and only amorphous carbon in the porous AAO template was found. Experimental results showed that the AAO template is catalytic during the CVD process, and it has the following two effects: to catalyze thermal decomposition of acetylene and to catalyze conversion of carbon decomposed from acetylene into CNTs or CNFs. Heat treatment could improve the graphitization degree, but it might also introduce new defects.     

SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。