Sequential Ugi Four‐Component Reaction (4‐CR)/CH Activation Using (Diacetoxyiodo)benzene for the Synthesis of 3‐(Diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones

A sequential Ugi four‐component reaction (4‐CR)/C? H activation using (diacetoxyiodo)benzene is reported. This process is a five‐component reaction of aromatic aldehydes, aniline derivatives, isocyanides, phenylpropiolic acid (3‐phenylprop‐2‐ynoic acid), and (diacetoxyiodo)benzene for the synthesis of 3‐(diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones. This procedure offers several advantages such as good yields, high bond‐forming efficiency, selectivity, and short reaction times.     

基于Proteus的电子电路设计探究

电子电路设计的一个重要环节,就包括电路功能实验调试,在具体设计中为了达到简化电路设计进程及缩短电路设计周期的目的,文章在设计分析典型函数信号发生器,四路彩灯（数字电视）和数显直流稳压电源时,使用了Proteus软件。进行分析设计之后得出,将Proteus运用在电子工程设计领域中的电子电路设计,能够达到省时省力省财目标的同时,还能够达到降低设计成本和提高设计效率的最终目标。     

基于阈值判断的动态源路由协议算法优化设计

针对移动自组织网动态源路由协议(DSR)中旧路径中断至新路径建立期间存在的丢包和端到端时延问题,设计了一种基于阈值判断的路由发现和维护算法,以优化路由协议性能。该方法首先定义节点电池能量和节点接收信号能量双阈值等级,分别用于衡量节点和既存链路状态;然后修改路由发现和路由维护算法,使动态源路由具备阈值判断功能。分别对增强型动态源路由协议(EDSR)包传递率和端到端时延等性能随节点数目和移动速度等参数的变化规律进行了软件仿真。实验结果表明,节点数目超过150或者速度小于10 m/s时,EDSR端到端时延和包传递率优于DSR,其他性能基本相当,因此EDSR协议性能得到明显改善,为低速大规模移动自组网路由协议提供了重要参考。     

表面等离子阵列结构中的耦合增强反射效应其红外光谱增强特性研究

使用聚焦离子束刻蚀的方法制备了不同间距的表面等离子结构阵列,研究了由方形和圆形所构成的阵列在不同间距下的光学反应.实验表明,粒子之间耦合效应随着间距的显著减小而逐渐变强,从弱耦合变化为强耦合状态.当间距小于30 nm时,发现耦合增强的反射效应,共振波长也会随着间距的减小而发生红移.将制备的超小间距纳米阵列和傅里叶变换光谱仪的ATR附件相耦合,实验验证了相关阵列结构在红外光谱增强方面的显著效果.相关的发现和表面等离子阵列结构可以在传感、探测和光谱增强等方面取得一定的应用.     

Nanoporous Silver Thin Films: Multifunctional Platforms for Influencing Chain Morphology and Optical Properties of Conjugated Polymers

Disordered nanoporous silver (NPAg) thin films fabricated by a thermally assisted dewetting method are employed as a platform to influence chain alignment, morphology, and optical properties of three well‐known conjugated polymers. Grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) measurements show that the porous structure of the metal induces close π–π stacking of poly(3‐hexylthiophene) (P3HT) chains and extended, planar chain conformations of poly(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl) (PFO) and poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐(benzo[2,1,3]thiadiazol‐4,8‐diyl)] (F8BT). A greater degree of vertically‐oriented P3HT chains are found on NPAg compared with planar Ag. However, PFO and F8BT chain alignment is only affected when pore size is large. The optical properties of NPAg films are investigated by transmission and back‐scattering spectroscopies. Strong back‐scattering is observed for all NPAg morphologies, especially for NPAg with small pore sizes. Photoluminescence spectroscopy of conjugated polymer layers on NPAg showed pronounced emission enhancements (up to factors of 26) relative to layers on glass. The enhancements are attributed primarily to: 1) redistribution of conjugated polymer emission by Ag; 2) redirection of emission by polymer‐filled nanopores; and 3) local electromagnetic field effects. This work demonstrates the potential of NPAg‐thin films to influence molecular chain morphology and to improve light‐extraction in organic optoelectronic devices.     

基于FBG的多级延迟SBS结构的慢光系统研究

设计一种基于光纤布拉格光栅(FBG)的多级延迟受激布里渊散射(SBS)结构的慢光系统.实验中采用2个FBG和一段15 km标准单模光纤(SSMF),利用光栅不同的反射特性,使信号光和泵浦光可重复通过同一段光纤相互作用,在仅使用一段光纤情况下达到双级时延的效果,并且FBG对信号光同样具有一定的延迟.实验结果表明,在展宽S...     

Au nanowire-on-film SERRS sensor for ultrasensitive Hg2+ detection

We report an ultrasensitive and selective single nanowire-on-film (SNOF) surface-enhanced resonance Raman scattering (SERRS) sensor for Hg(2+) detection based on structure-switching double stranded DNAs (dsDNAs). Binding of Hg(2+) induces conformational changes of the dsDNAs and let a Raman reporter get close to the SNOF structure, thereby turning on SERRS signal. The well-defined SNOF structure provides a detection limit of 100 pM with improved accuracy in Hg(2+) detection. This sensor is stable over a considerable amount of time and reusable after simple treatment. Since this SNOF sensor is composed of a single Au NW on a film, development of a multiplex sensor would be possible by employing NWs modified by multiple kinds of aptamers.     

Adsorption of aqueous Hg (II) by a novel poly(aniline‐co‐o‐aminophenol)/mesoporous silica SBA‐15 composite

A novel poly(aniline‐co‐o‐aminophenol) (PAOA)/mesoporous silica SBA‐15 nanocomposite was synthesized and investigated for adsorption of Hg (II) from aqueous solutions of wide pH range. A chemical oxidation method was employed for polymerization of aniline and o‐aminophenol on an ordered SBA‐15 template to obtain a significantly enlarged BET surface area of the adsorbent. Efficiency study revealed that the PAOA/SBA‐15 could reach a maximum Hg (II) adsorption capacity of over 400 mg/g. Kinetic study showed that the Hg (II) adsorption by the PAOA/SBA‐15 fitted a pseudo‐second‐order kinetic model, indicating that the mercury adsorption process was predominantly controlled by chemical process. The results of this study also proved that the adsorbed Hg (II) could be effectively desorbed from the PAOA/SBA‐15 in 0.1M HCl and 5% sulfocarbonide solutions. Associated adsorption mechanism was also investigated by means of Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

基于出行目的链的出行生成—分布组合模型分析

目前,我国城市轨道交通客流预测大多采用交通产生、吸引、出行分布、出行方式划分四阶段模型,其中出行生成与分布是方式划分和交通分配的前提,是模型重要的组成部分.在对传统的四阶段模型的分析基础上,结合非集计模型的优点,论文提出了基于出行目的链的出行生成—分布组合模型.模型充分考虑了居民出行链、出行目的等对客流预测的影响,在完善我国轨道交通客流预测理论和方法,提高预测精度等方面具有一定的理论价值和实际意义.     

Localized surface plasmon resonance: nanostructures, bioassays and biosensing--a review

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles (NPs) that are smaller than the incident wavelength. As in surface plasmon resonance, the electric field of incident light can be deposited to collectively excite electrons of a conduction band, with the result being coherent localized plasmon oscillations with a resonant frequency that strongly depends on the composition, size, geometry, dielectric environment and separation distance of NPs. This review serves to describe the physical theory of LSPR formation at the surface of nanostructures, and the potential for this optical technology to serve as a basis for the development bioassays and biosensing of high sensitivity. The benefits and challenges associated with various experimental designs of nanoparticles and detection systems, as well as creative approaches that have been developed to improve sensitivity and limits of detection are highlighted using examples from the literature.