纳米银粒子表面增强拉曼光谱在宠物饲料中三聚氰胺的速测研究

研究将制备的纳米银粒子作为表面增强拉曼光谱的增强试剂,实现对宠物饲料中三聚氰胺的快速定性定量分析。以709与1542cm-1处拉曼位移作为定性依据,以1149cm-1峰强度作为归一化标准,在1.0～10.0mg·kg-1浓度范围实现定量计算,检测限0.5mg·kg-1。研究发现,纳米银粒子对三聚氰胺具有较强的拉曼增强效应,特征峰信号强度与纳米银粒子加入时间,溶液涡旋强度有很大的关系,同时也受提取溶剂的种类、提取方式及样品加入量的影响。本方法中每个样品5min内完成分析,与现有方法相比,快速简便,对宠物饲料中三聚氰胺实现现场、快速检测。     

新型掺偶氮苯聚合物的取向增强及全息存储

研究一种新型的并列式的高密度存储材料ADPA-PVK-PBA-TNF聚合物薄膜.在非吸收区用光抽运测试法研究了薄膜光致双折射,获得光致双折射变化值Δn=1.3×10^-3,分析了该聚合物薄膜光致取向增强的物理和化学机理.探讨了抽运光对光致双折射的增强和抑制效应.在此基础上初步实现了多重角度复用信息存储、获得了较为清晰的全息存储图像.并讨论了图象存储的增强/抑制效应,利用这种效应可对存储图像处理或删除. 关键词： 掺杂偶氮苯聚合物薄膜 光致双折射 光全息存储 光致取向增强     

基于相关序列脉冲的布里渊光时域反射测量系统解码方法研究

布里渊光时域反射测量(BOTDR)系统空间分辨率和传感距离存在相互制约的关系.相关序列脉冲编码技术可用于解决这一矛盾,但直接对编码脉冲的布里渊散射采样信号进行解码,会因采样时间间隔小于编码单位脉冲宽度而导致解码信号的失真,从而降低了系统空间分辨率和测量精度.分析了直接互相关解码对BOTDR系统空间分辨率的影响,提出一种...     

基地化保障模式下飞机四站装备需求确定研究

基地化保障模式对飞机保障资源需求的影响是制约其发展的重要问题.基于离散事件仿真(DES)方法建立了航空兵场站四站保障过程的数学模型,考虑了四站装备自身故障的影响,并在所建模型的基础上提出运用离散系统仿真软件ARENA对四站保障过程进行仿真.仿真结果表明,与现行的航空兵场站单机种保障策略相比,基地化保障模式能够减少各个机种通用的四站装备数量需求,而单个机种特有的四站装备需求不变.     

Microchip-Based Surface Enhanced Raman Spectroscopy for the Determination of Sodium Thiocyanate in Milk

A simple integrated agarose microchip-based substrate is reported for surface enhanced Raman spectroscopy. The substrate was evaluated for the determination of sodium thiocyanate in milk. The limit of detection was 5 × 10^?7 grams per milliliter. The microarray design allowed the synchronous processing of many samples. The reported procedure is green and practical for on-site determination of sodium thiocyanate in milk with potential for additional applications.     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Λ型原子与单模光场的非共振作用制备四光子相干态

根据简并Λ型三能级原子与单模光场的改进型有效哈密顿量 ,通过矩阵形式法推导出原子光场系统的波函数 ,提出利用简并Λ型三能级原子与单模光场的远离共振相互作用制备四光子相干态的有效方案。并且证明按照同样的方法不能制备出四成分以上的相干叠加态 ,即当在腔中注入的第三个原子的速度与第二个原子的速度相等时 ,腔场将保持这种四光子相干叠加态不变     

KrF激光受激布里渊散射反射率稳定性的研究

实验研究发现抽运功率密度（或抽运能量）的波动引起的受激布里渊散射(SBS)反射率的不稳定程度受实验参数（抽运能量、介质气压和透镜焦距）的影响.当抽运能量、介质气压和透镜焦距这三个参数同时满足下列条件时可以获得稳定的输出：抽运能量超过5倍的SBS阈值，介质气压在16×105Pa和透镜焦距在15—50cm的范围内；同时还发现当改变实验参数时SBS反射率与稳定性的变化规律完全一致，反射率越高稳定性越好.通过理论分析得到 SBS反射率的相对稳定度实际上是受GIL因子的影响，理论计算与实验符合得很好. 关键词： KrF激光 受激布里渊散射 反射率 稳定度     

晶体中三阶有效非线性系数的计算方法

经过对ｘ（３）ｉｊｋｌ的脚标进行简化压缩处理，首次得出了全部晶体点群共１１种不同的Ｘ（３）ｉｍ矩阵表达形式及Ｋｌｅｉｎｍａｎ对称条件成立下的简化形式，给出了各类晶体中四波相互作用过程中Ｘ（３）＾ｅｆｆ的计算方法。     

Stimulated raman scattering in fiber optic systems

The effect of stimulated Raman scattering (SRS) in fiber optic communications is considered. On one hand, SRS limits the launch power in a multiple-channel communication system; while on the other hand, SRS can provide optical amplification in the 1.3-μm and 1.55-μm windows. In most of the previous work these issues have been treated separately by using different assumptions. A solution is usually obtained by solving differential equations. We present a numerical method that involves the simultaneous solution of integral equations describing SRS in optical fiber. The method is general enough to be applicable for wavelength division multiplexing (WDM), optic frequency division multiplexing (OFDM), and optical amplification. However, it is efficient and simple to program and uses just a few realistic assumptions. A WDM communication system with 10 optical channels in the 1.55-μm window is studied by using this method, The data rate is above 1 Gbps. The system parameters are such that the other nonlinear effects, such as stimulated Brillouin scattering and four-wave mixing, are less significant for the system. Launch power limitations imposed by SRS are investigated for IM / DD and coherent systems. The receiver dynamic range over the wavelengths of interest is an important factor in determining the launch power limitations. An optical amplifier in the 1.3-μm window is also analyzed. The two-pump technique is investigated. With pump power levels of about 500 mw 0-dB gain can be achieved for a 30-km repeaterless link. Finally, the calculated results agree with the experiments.