十四烷基三甲基溴化铵对膨润土改性合成及其表征

用阳离子表面活性剂十四烷基三甲基溴化铵(C17H38NBr)对膨润土进行插层改性制备.配制浓度为2.35%十四烷基三甲基溴化铵溶液备用.在碘量瓶中称取3.04g膨润土,加入30mL超纯水、10mL十四烷基三甲基溴化铵溶液,制成土浆,放入微波炉中反应1min.产物经抽滤、洗涤、烘干、研磨,做FT-IR和DSC-TG分析.DSC曲线在500℃时有一明显的放热峰;TG曲线显示改性土的失重率有明显的增大.有机改性膨润土中确实含有大量有机物,改性成功.     

A novel layered bimetallic phosphite intercalating with organic amines: Synthesis and characterization of Co(H2O)4Zn4(HPO3)6·C2N2H10

A new layered cobalt-zinc phosphite, Co(H₂O)₄Zn₄(HPO₃)₆·C₂N₂H₁₀ has been synthesized in the presence of ethylenediamine as the structure-directing agent. The compound crystallizes in the monoclinic system, space group Cc (No. 9), a=18.2090(8), b=9.9264(7), c=15.4080(7) Å, β=114.098(4)°, V=2542.3(2) Å³, Z=4, R=0.0323, wR=0.0846. The structure consists of ZnO₄ tetrahedra, CoO₆ octahedra and HPO₃ pseudopyramids through their vertices forming bimetallic phosphite layers parallel to the ab plane. Organic cations, which reside between the inorganic layers, are mobile and can be exchanged by NH₄⁺ cations without the collapse of the framework.     

Hydrothermal Synthesis and Crystal Structure of [（CH3CH2）4N]4[（La12（OH）12MoO29）],A Novel Cluster Compound with a MoO5 Hexahedron Center surrounded by La—O Octahedron

IntroductionRecently,the molecular designs of polyox-ometalates( POM) with basic oxometal clusterbuilding blocks are of great interest[1,2 ] . Hy-drothermal synthesis,with the characteristic ofone- pot reaction,provides a convenient method toobtain novel structures of POM compounds[3— 6] . Inthe Ln/Mo/O system ( Ln=rare earth) ,somecompounds containing La and Mo elements havebeen reported[7— 17] . However,these compoundshave all been synthesized under the highly restrict-ed synthetic co…     

LBL分子沉积法制备葡萄糖氧化酶电极

采用以静电力为主的逐层分子交替沉积技术制备葡萄糖氧化酶（GOD）电极.通过带有正电荷的聚二甲基二烯丙基铵盐酸盐（PDDA）和带有负电荷的GOD交替沉积在修饰有3-巯基-1-丙基磺酸钠（MPS）的金电极表面.以甲酸二茂铁为电子媒介体,用循环伏安法检测GOD电极对葡萄糖的响应.结果表明,当GOD电极组装层数小于4时,电流响应随着层数的增加而增大,超过4层时电流响应减小.其中4层GOD修饰电极的线性范围为0.55～6.63 mmol•L－1,当pH为7.0时,响应最大.同时电极的检测重现性能良好,相对标准偏差为2.4％.     

测定外延层电阻率的面接触方法研究

评论了美国科学家C.C. Allen等于1966年发表的“测定外延层电阻率的点接触方法”之论文的局限性,从而提出了本方法。本方法从理论上解一维Poisson方程并与C.C。Allen法的公式相比较,获得某些公式。文中导出了面接触方法雪崩击穿电压V_(Ba)~∞(V)及点接触方法雪崩击穿电压V_(Bp)~∞(V)的比值为V_(Ba)~∞=0.456;同时还导出了点接触方法外延层耗尽层宽度为t_(min p)(μm)和面接触方法外延层耗尽层宽度t_(mina(μm)的比值为t_(minp)/t_(mina)=2.565。在实践上,为证实两种模型的功能,利用两种探针进行了对比测试。一种是通常被采用的点接触锇尖探针:另一种是利用φ0.8±0.1mm的银针,在银针顶上吸上φ0.4±0.1mm的汞球,以实现面接触。理论和实验吻合良好。     

2-烷基-苯并咪唑在硝酸银亚相上的Langmuir膜及LB膜

对不同链长的2-烷基-苯并咪唑衍生物（BzCn,烷基链长从C5到C15）在硝酸银亚相上的成膜行为及形成的LB膜的结构进行了研究.表面压－面积曲线的结果表明，短链(C5～C9)的2-烷基-苯并咪唑可在银离子亚相上形成稳定的单分子膜，而长链(C13和C15)衍生物则形成多层膜.利用LB技术可将上述Langmuir膜转移到固体基板上形成LB膜，其吸收光谱的结果说明了苯并咪唑和银离子配位.利用AFM、XRD及FT-IR等技术研究了烷基链长对LB膜结构的影响.实验结果表明,除了BzC15，其余的衍生物都可形成规整的层状结构.短链衍生物的单层LB膜具有均一、平整的形貌；而对于BzC15，观察到多层结构.     

Immunosensors Based on Layer‐by‐Layer Self‐Assembled Au Colloidal Electrode for the Electrochemical Detection of Antigen

Colloidal Au particles have been deposited on the gold electrode through layer‐by‐layer self‐assembly using cysteamine as cross‐linkers. Self‐assembly of colloidal Au on the gold electrode resulted in an easier attachment of antibody, larger electrode surface and ideal electrode behavior. The redox reactions of [Fe(CN)₆]^4?/[Fe(CN)₆]^3? on the gold surface were blocked due to antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.0 with various concentrations of antigen at 37 °C for 30 min. Further, an amplification strategy to use biotin conjugated antibody was introduced for improving the sensitivity of impedance measurements. Thus, the sensor based on this immobilization method exhibits a large linear dynamic range, from 5–400 μg/L for detection of Human IgG. The detection limit is about 0.5 μg/L.     

Electrochemical Biosensors Based on Layer‐by‐Layer Assemblies

Layer‐by‐layer (LBL) assemblies, which have undergone great progress in the past decades, have been used widely in the construction of electrochemical biosensors. The LBL assemblies provide a strategy to rationally design the properties of immobilized films and enhance the performance of biosensors. The following review focuses on the application of LBL assembly technique on electrochemical enzyme biosensors, immunosensors and DNA sensors.     

Structural Patterns and Dimensionality in Magnesium Borophosphates: The Crystal Structures of Mg2(H2O)[BP3O9(OH)4] and Mg(H2O)2[B2P2O8(OH)2]·H2O

Hydrothermal investigations in the system MgO/B₂O₃/P₂O₅(/H₂O) yielded two new magnesium borophosphates, Mg₂(H₂O)[BP₃O₉(OH)₄] and Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O. The crystal structures were solved by means of single crystal X‐ray diffraction. While the acentric crystal structure of Mg₂(H₂O)[BP₃O₉(OH)₄] (orthorhombic, P2₁2₁2₁ (No. 19), a = 709.44(5) pm, b = 859.70(4) pm, c = 1635.1(1) pm, V = 997.3(3) × 10⁶ pm³, Z = 4) contains 1D infinite chains of magnesium coordination octahedra interconnected by a borophosphate tetramer, Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O (monoclinic, P2₁/c (No. 14), a = 776.04(5) pm, b = 1464.26(9) pm, c = 824.10(4) pm, β = 90.25(1)°, V = 936.44(9) × 10⁶ pm³,Z = 4) represents the first layered borophosphate with 6³ net topology. The structures are discussed and classified in terms of structural systematics.     

任意层互连生产技术研究

任意层互连（ELIC）是最高阶的高密度连接（HDI）制程，它可以比传统线路在层数相同的情况下，增加约30%层间互连；随着移动通讯产品功能需求的增加，ELIC技术被大举应用在智能手机及平面电脑等产品上。高阶ELIC线路板的生产不但流程长，且生产难度较大。本文对ELIC板的制作难点进行了分析，并提出相应的解决方法和生产注意事项，为ELIC工艺产业化提供必要的参考依据。