Novel Quasi‐Elliptic Function Bandpass Filter Using Hexagonal Resonators with Capacitive Loading

A novel and compact elliptic‐function bandpass filter is proposed in this letter. The techniques of slot etching and the addition of open stubs are applied to enhance the self‐inductance and self‐capacitance of hexagonal open‐loop resonators. Thus, size reduction and improved transmission performance are obtained. Compared to the performance of the conventional design, the central frequency and insertion loss are reduced by 28% and 3.1 dB, respectively. Measurements show that the proposed filter has a fraction bandwidth of 23% at the central frequency of 1.84 GHz, and its insertion loss in the passband is less than ?1.5 dB. The bandpass filter occupies only 12 mm×21.2 mm (approximately 0.24λ_g×0.14λ_g).     

应用于RFID技术中交指型微带带通滤波器的设计

基于RFID技术中对小型化滤波器的需求,首先从理论上对小型化程度更高的微带交指型带通滤波器的滤波特性进行了分析,接着使用微波仿真软件ADS对微带交指型带通滤波器进行仿真,仿真时根据设计指标用ADS的优化功能对原理图进行多次优化,优化时对参数实行逐个优化法,使得优化速度更快.通过对一中心频率为2.45 GHz带宽为9%的...     

一种新型超宽带带通滤波器的设计

针对超宽带(UWB)系统易受无线网络信号干扰及传统的超宽带带通滤波器阻带较窄,不能有效抑制谐波的问题,提出了一种新型的UWB带通滤波器,该滤波器由两级交指梳状耦合谐振器级联组成,通过增加耦合指的个数来实现陷波特性,然后在两个交指谐振器的中间添加一个槽线锥形谐振器,使该滤波器具有抑制高次谐波特性,达到拓宽高阻带的效果,同时由于槽线谐振器的加入,陷波频段的抑制电平进一步提高.实验结果证明,所设计的滤波器既能保证3.1～10.6 GHz频段内的插入损耗小于3 dB,陷波频段为5.7～5.8 GHz,陷波频段的抑制电平高达-43 dB,同时又能拓宽高频阻带.     

Millimeter-Wave Ultra-Wideband Bandpass Filter Employing Dual-Mode Ring Resonators Fed by Step-Impedance Coupled Lines

This paper presents a novel millimeter-wave ultra-wideband (UWB) bandpass filter (BPF) based on microstrip dual-mode rectangular ring resonators. In order to get strong coupling between the input/output line and the dual-mode ring resonators, a step-impedance parallel-coupled structure is adopted for the design of the filter. On the other hand, transmission zeros are produced by the dual-mode resonator. As a consequence, the filter has low insertion-loss in its passband, sharp attenuation in its lower and upper stopbands and very wide stopbands. As an example, a filter with two dual-mode ring resonators is designed and fabricated. The measured frequency property of the fabricated filter shows good agreement with the simulated response.     

A Narrow Bandwidth Microstrip Band‐Pass Filter with Symmetrical Frequency Characteristics

This letter proposes a band‐pass filter (BPF) with two transmission zeros based on a combination of parallel coupling and end coupling of half‐wave transmission lines. The fabricated BPF exhibited a narrow bandwidth and two transmission zeros near the pass‐band due to the end‐coupled and shielding waveguide. At the center operation frequency of 60 GHz, the 20 dB bandwidth of the BPF is 1.0 GHz, which is almost 2% of the center operation frequency, and the insertion loss is 3.12 dB. Two transmission zeros reach approximately 40 dB at 58.5 and 62.5 GHz. The simulation results almost agree with the measured results.     

LTCC五阶LC带通滤波器的设计与关键工艺分析

低温共烧陶瓷(LTCC)技术具有内埋置无源元件、集成度高、可靠性好以及优良的高频特性等特点,成为无线通讯系统中更具影响力与竞争力的技术之一.在了解现有工艺平台的基础上,利用集总参数元件进行带通滤波器的设计,使用高频电磁场仿真软件Ansoft HFSS建立滤波器的物理模型并对其进行仿真,经LTCC工艺线加工出中心频率为1500 MHz、带宽为800 MHz的LC带通滤波器.成品经矢量网络分析仪Agilent E8358A测试,测试结果与仿真曲线吻合较好,都符合设计值的要求.最后对影响滤波器性能的一些关键工艺进行了分析,达到了将LTCC 滤波器设计与工艺实现相结合的目的.     

Ku 波段微带交叉耦合带通滤波器的结构与设计

基于广义切比雪夫滤波器综合理论,本文设计了一个Ku 波段微带发夹谐振型交叉耦合滤波器。该滤波器的拓扑结构为CQ 型。由于引入非相邻谐振器之间的耦合,在有限频率点处产生传输零点,这样不仅使滤波器具有更好的选择性,而且其结构更加紧凑,尺寸也大大缩小。本文通过HFSS 电磁仿真软件对其进行了优化设计。其仿真结果很好地体现了该滤波器的特性。与同阶数的传统滤波器相比,交叉耦合型滤波器具有更好的带外抑制特性,有较好的工程应用意义。     

一种利用小体积偏置探测器的新型锥束X射线CT系统

在传统的CT系统中, 系统的硬件成本和计算量都是非常巨大的. 提出了一种利用偏移放置的面阵探测器的锥束CT系统, 在这种系统中X射线束仅仅覆盖被扫描物体的一半体积, 投影数据在探测器方向上是截断的, 探测器尺寸和投影数据量都减少为传统CT系统的一半. 在这种新型扫描方式下, 现有的CT重建算法都不能处理. 因此, 提出了一种BPF形式的直接反投影重建方法. 该方法不需要对投影数据重排, 直接反投影滤波重建出最终的图像. 因此, 该算法在数学上更简洁, 计算速度更快. 最后, 数值模拟实验和真实CT系统实验结果均验证了该系统和重建算法能够获得高质量的CT图像.     

新型微带带通滤波器设计

提出一种新型微带带通滤波器设计，它是由带有J-变频器的零阶谐振ZOR（zeroth-order resonant）系统构成。零阶谐振系统以互补分裂谐振环和一系列沟道组成的左手材料LHM（Left—HandedMaterial）为基本单元，在传统设计的基础上进行改进．得到适合具有严格设计要求的滤波器设计使用模型，并给出此零阶谐振系统的共振频率和导纳斜率参数的确定方法。实验表明，该微带带通滤波器的模拟量与测量之间存在最佳关系，并具有高选择性能、对称的响应曲线以及良好的通带带宽控制性能。     

New dual-mode square patch bandpass filter using CSRR slot-type perturbation

A compact dual-mode microstrip bandpass filter using square-patch resonator and a new perturbation element is designed in this letter. This new slot-type element is composed by a complement split-ring resonator (CSRR) with two pairs of etching slots. The nature of coupling between the degenerate modes is investigated with respect to the perturbation size. By proper arranging the orientations of the CSRRs, new coupling characteristics can be obtained. The proposed dual mode bandpass filters are designed, and simulated. The simulation and measure results of proposed bandpass filter are reasonable.