Tuning the frontier molecular orbital energy levels of n‐type conjugated copolymers by using angular‐shaped naphthalene tetracarboxylic diimides,and their use in all‐polymer solar cells with high open‐circuit voltages

An angular‐shaped naphthalene tetracarboxylic diimide (NDI) was designed and synthesized as a new building block for n‐type conjugated polymers to tune their energy levels. Three n‐type copolymers incorporating this angular‐shaped NDI as the acceptor moiety were obtained by Stille coupling reactions and had number average molecular weights of 18.7–73.0 kDa. All‐polymer bulk‐heterojunction solar cells made from blends of these polymers with poly(3‐hexylthiophene) gave a power conversion efficiency up to 0.32% and exhibited an open‐circuit voltage (V_oc) up to 0.94 V due to their relative high‐lying lowest unoccupied molecular orbital energy levels. The high V_oc of 0.94 V is higher than that of solar cells based on linear‐shaped NDI‐containing polymers (<0.6 V). The results indicate that the angular‐shaped NDI is a promising building block for constructing nonfullerene polymer acceptors for solar cells with high open‐circuit voltages. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Integrated Devices to Realize Energy Conversion and Storage Simultaneously

Other forms of energy are generally converted to electric energy and then transported to electrochemical devices, where the energy is stored, by external electric wires. To further improve total energy conversion and storage efficiency, interest in simultaneously realize the energy conversion and storage in a single device has increased. This Concept describes recent progress in developing such novel integrated energy devices. Both planar and wire architectures are carefully illustrated with an emphasis on the “energy wire” which has been the focus of past developments due to its unique and promising applications, such as being woven into clothes or other complex structures by conventional textile technology. The current challenges and future directions of the integrated devices, particularly in the wire architecture, are summarized.     

SYNTHESIS OF TWO STABLE DIPHOSPHENES WITH A NEW STABILIZING SUBSTITUENT

Abstract

Two new diphosphenes 7 and 10 have been synthesized by action of DBU on trichlorogermylphosphines 4 and 8; this route involves the intermediate formation of chlorophosphines 5 and 9. Diphosphenes 7 and 10 are stabilized by the 2,6-bis(trifuoromethyl)phenyl group which presents both steric and electronic effects and is used for the first time in phosphorus chemistry.     

MXene-碳黑/硫复合材料在锂硫电池一体式电极的研究

锂硫电池的实际能量密度不高和多硫化物（LiPSs）的穿梭效应等问题严重影响了该电池的实际应用。本文通过将二维的Ti₃C₂T_x Mxene纳米片与碳黑/硫（CB/S）材料进行混合,制备了Ti₃C₂T_x-CB/S正极材料并将其涂覆在商业隔膜（PP）上,最终获得了Ti₃C₂T_x-CB/S-PP一体式电极并用于锂硫电池。利用Ti₃C₂T_x纳米片对CB/S进行修饰,不仅能提高活性物质硫的导电性,还能对扩散的LiPSs进行物理阻挡和化学吸附。而一体式电极的设计有利于提高电池的能量密度。恒流充放电测试结果表明,Ti₃C₂T_x-CB/S-PP电极在0.1 C电流下的初始放电容量为1028.8 mAh·g^-1,高于不含Ti₃C₂T_x的CB/S-PP电极的896.8 mAh·g^-1。Ti₃C₂T_x-CB/S-PP电极还展示出了比基于传统铝箔集流体的Ti₃C₂T_x-CB/S-Al电极更好的循环稳定性,前者在0.5 C下400圈长循环测试中的每圈衰减率为0.072%,而后者则为更高的0.10%。本文利用Ti₃C₂T_x-CB/S构建一体式电极的策略为实现高性能和高能量密度的锂硫电池提供了新的研究方向。     

波长校准用低压石英汞灯驱动电源的研制

研制波长校准用低压石英汞灯电源,用于驱动汞灯起辉并维持稳态发光。电路由EMI滤波电路、桥式整流电路、LCC半桥谐振逆变电路、控制电路和保护电路5部分组成。采用系统建模与仿真验证电路的可行性并计算电路参数理论值,利用示波器和功率表验证电源输出参数,功率输出稳定性不大于0.03 W。根据紫外可见近红外分光光度计国防最高计量标准对研制的电源驱动汞灯的工作效果进行评价。结果表明,汞灯能够输出系列特征谱线,谱线相对强度稳定性不大于5.16%;汞灯工作3 h后,灯管外壳表面温度为43℃。该驱动电源的性能参数满足JJG112–2015《低压石英汞灯波长标准器检定规程》的要求。     

An Open‐Circuit Voltage and Power Conversion Efficiency Study of Fullerene Ternary Organic Solar Cells Based on Oligomer/Oligomer and Oligomer/Polymer

Variations in the open‐circuit voltage (V _oc) of ternary organic solar cells are systematically investigated. The initial study of these devices consists of two electron‐donating oligomers, S2 (two units) and S7 (seven units), and the electron‐accepting [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) and reveals that the V _oc is continuously tunable due to the changing energy of the charge transfer state (E _ct) of the active layers. Further investigation suggests that V _oc is also continuously tunable upon change in E _ct in a ternary blend system that consists of S2 and its corresponding polymer (P11):PC₇₁BM. It is interesting to note that higher power conversion efficiencies can be obtained for both S2:S7:PC₇₁BM and S2:P11:PC₇₁BM ternary systems compared with their binary systems, which can be ascribed to an improved V _oc due to the higher E _ct and an improved fill factor due to the improved film morphology upon the incorporation of S2. These findings provide a new guideline for the future design of conjugated polymers for achieving higher performance of ternary organic solar cells.

     

阴离子交换色谱-积分脉冲安培法测定鱼粉和玉米粉水解液中氨基酸

将高效阴离子交换色谱．积分脉冲安培直接检测法应用于鱼粉和玉米粉水解液中的氨基酸的分析测定。该方法使用Dionex AminoPac PA10阴离子交换柱为分析柱，控制柱温为35℃，以NaOH和NaAc的强碱性溶液为淋洗液，在合适的梯度条件下，可以实现对17种常见氨基酸的高效分离。在强碱性条件下，获得良好分离的各个氨基酸可在配有金工作电极的电化学检测器上以积分脉冲安培法获得高灵敏度的检测。在优化的测定条件下，该方法对这17种氨基酸的检出限在0．21—3．38pmol之间；峰面积校正曲线的线性范围为2—3个数量级；5次平行测定的峰面积的相对标准偏差RSD在0．32％—4．7％之间。该方法应用于玉米粉和鱼粉水解液中氨基酸含量的测定，结果良好。对玉米粉和鱼粉水解液标准加入的回收率分别在81．9％—108．0％和90．0％～108．0％之间。     

压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

化学模拟在反应堆水化学课程中的应用

高温高压化学反应对反应堆设备的可靠性、反应堆性能的控制、核电站运行的安全持久性等具有重要影响,但相关实验难以在高校教学中开展。借助PHREEQC程序及最新热力学数据,建立了反应堆一回路硼酸-氢氧化锂添加配比、腐蚀沉淀物产生及二回路pH控制方案的化学反应模型。运用化学模拟来教学,促进了学生对所学知识的理解与掌握,丰富了现代教学方法。相关模型对核电企业的培训也具有一定参考价值。     

Detection of monohydroxylated polycyclic aromatic hydrocarbons in urine and particulate matter using LC separations coupled with integrated SPE and fluorescence detection or coupled with high‐resolution time‐of‐flight mass spectrometry

A high‐performance liquid chromatographic (HPLC) method with integrated solid‐phase extraction for the determination of 1‐hydroxypyrene and 1‐, 2‐, 3‐, 4‐ and 9‐hydroxyphenanthrene in urine was developed and validated. After enzymatic treatment and centrifugation of 500 μL urine, 100 μL of the sample was directly injected into the HPLC system. Integrated solid‐phase extraction was performed on a selective, copper phthalocyanine modified packing material. Subsequent chromatographic separation was achieved on a pentafluorophenyl core–shell column using a methanol gradient. For quantification, time‐programmed fluorescence detection was used. Matrix‐dependent recoveries were between 94.8 and 102.4%, repeatability and reproducibility ranged from 2.2 to 17.9% and detection limits lay between 2.6 and 13.6 ng/L urine. A set of 16 samples from normally exposed adults was analyzed using this HPLC‐fluorescence detection method. Results were comparable with those reported in other studies. The chromatographic separation of the method was transferred to an ultra‐high‐performance liquid chromatography pentafluorophenyl core–shell column and coupled to a high‐resolution time‐of‐flight mass spectrometer (HR‐TOF‐MS). The resulting method was used to demonstrate the applicability of LC‐HR‐TOF‐MS for simultaneous target and suspect screening of monohydroxylated polycyclic aromatic hydrocarbons in extracts of urine and particulate matter.