酸性AlCl3-BMIC离子液体中的铝阳极溶解

采用线性扫描伏安法研究了Lewis 酸性AlCl₃-BMIC (BMIC: 1-butyl-3-methylimidazolium chloride)离子液体中铝电极的溶解. 铝电极在阳极极化时出现了钝化现象, 钝化是由于在铝电极表面形成了固体AlCl₃钝化膜造成的. 铝的电化学溶解过程可以依次分为三个区: 电化学控制区、过渡区和钝化区. 在电化学控制区, 铝的电化学溶解速率随着电位的正移而逐渐增加; 在过渡区, 由于电极表面AlCl₄^-和Al₂Cl₇^-浓度发生改变而析出固体AlCl₃使得铝电化学溶解速率随着电位的正移而逐渐减小; 当钝化膜形成之后, 铝的电化学溶解速率不再随着电位的正移而发生改变, 铝溶解进入钝化区. 增加搅拌、升高温度、降低离子液体AlCl₃摩尔分数都可以增加铝溶解阳极极限电流密度.     

MnOx/Al-SBA-15的结构性质及低温NH3选择性催化还原NOx

采用后合成法制备MnO_x/Al-SBA-15催化剂, 考察了催化剂的低温NH₃选择性催化还原(SCR)NO_x的性能. 利用傅里叶透射红外变换(FTIR)光谱、N₂吸附-脱附、X射线衍射(XRD)、扫描电镜(SEM)、拉曼光谱(Raman)、X射线光电子能谱(XPS)及NH₃程序升温脱附(NH₃-TPD)的表征手段, 对催化剂的结构性质和SCR性能进行了系统分析. 结果表明, 适量Al的掺杂能提高MnO_x/SBA-15催化剂的SCR活性, 当硅铝摩尔比为50时, 催化剂活性最佳. 表征结果显示, Al掺杂后, 催化剂仍保持良好的骨架结构, 较大比表面、孔容和孔径, 并且Mn在催化剂表面富集, 由低价态转化为高价态, MnO₂为催化剂的主要活性相. 此外, Al的掺杂使MnO_x在催化剂表面高度分散, 表面酸性增强, 从而提高了催化剂的SCR活性.     

A multiplex single nucleotide polymorphism genotyping method using ligase‐based mismatch discrimination and CE‐SSCP

Accuracy, simplicity, and cost‐effectiveness are the most important criteria for a genotyping method for SNPs compatible with clinical use. One method developed for SNP genotyping, ligase‐based discrimination, is considered the simplest for clinical diagnosis. However, multiplex assays using this method are limited by the detection method. Although CE has been introduced as an alternative to error prone microarray‐based detection, the design process and multiplex assay procedure are complicated because of the DNA size‐dependent separation principle. In this study, we developed a simple and accurate multiplex genotyping method using reaction condition‐optimized ligation and high‐resolution CE‐based SSCP. With this high‐resolution CE‐SSCP system, we are able to use similar‐sized probes, thereby eliminating the complex probe design step and simplifying the optimization process. We found that this method could accurately discriminate single‐base mismatches in SNPs of the tp53 gene, used as targets for multiplex detection.     

Portable paper‐based device for quantitative colorimetric assays relying on light reflectance principle

This paper presents a novel paper‐based analytical device based on the colorimetric paper assays through its light reflectance. The device is portable, low cost (<20 dollars), and lightweight (only 176 g) that is available to assess the cost‐effectiveness and appropriateness of the original health care or on‐site detection information. Based on the light reflectance principle, the signal can be obtained directly, stably and user‐friendly in our device. We demonstrated the utility and broad applicability of this technique with measurements of different biological and pollution target samples (BSA, glucose, Fe, and nitrite). Moreover, the real samples of Fe (II) and nitrite in the local tap water were successfully analyzed, and compared with the standard UV absorption method, the quantitative results showed good performance, reproducibility, and reliability. This device could provide quantitative information very conveniently and show great potential to broad fields of resource‐limited analysis, medical diagnostics, and on‐site environmental detection.     

FRET based selective and ratiometric ‘naked-eye’ detection of CN in aqueous solution on fluorescein–Zn–naphthalene ensemble platform

We have developed a FRET-based ratiometric fluorescent probe for the detection of CN⁻ using a fluorescein–Zn–naphthalene ensemble (NFH·Zn²⁺). The sensing mechanism was ascribed by displacement approach. The chemosensor exhibits high selectivity and sensibility for CN⁻. The speculation was supported by fluorescence emission spectra, UV–vis spectrum, ¹H NMR titration experiments, and mass spectra. The interconversion of probe NFH and NFH·Zn²⁺ via the complexation/decomplexation by the modulation of Zn²⁺/CN⁻ mimics INHIBIT gate. In addition, it also shows an excellent performance in ‘dip stick’ method.     

镍基焦油裂解催化剂再生特性及粉尘作用机理研究

在常压固定床反应器中,考察1.0%NiO/0.1%MgO-Al2O3催化剂的稳定性和原位再生性能,并在进料中引入粉尘以模拟真实的煤与生物质热解气化的含尘环境。结果表明,随着反应温度的升高,催化剂的活性提高,寿命缩短。该催化剂在循环再生实验中表现出良好的耐久性,再生温度为800℃时水热失活现象显著,优选的再生温度为600~700℃,再生时间20 min。随着再生剂中水蒸气比例的增加,催化剂的比表面积和孔结构逐渐发生变化。EPMA和XRD表征结果表明,引入粉尘后并未改变催化剂的组成,引入MgO后会形成(Mg0.4Al0.6)Al1.8O4晶相。SiO2具有促进积炭产生的作用,MgO则对积炭的产生具有一定的阻滞作用。适当降低空速可减弱SiO2等惰性粉尘对催化剂活性的负面作用。     

Molecular Dynamics in 1- and 2-D Confinement as Studied for the Case of Poly(Cis-1,4-Isoprene)

Broadband Dielectric Spectroscopy (BDS) is used to probe the molecular dynamics of Type A polymer, poly(cis-1,4-isoprene), when confined in the 1-dimensional (1D) exploring space of thin layers and the 2-dimensional (2D) constraining geometry of unidirectional anodic aluminum oxide (AAO) nanopores. For both cases, it was observed that the structural relaxation remains bulk-like in its mean relaxation rate, although the distribution of its relaxation times is broadened in 2D confinement. Furthermore, the fluctuation of the end-to-end vector is interrupted, with the 1D case being relatively less pronounced. By this clear-cut comparison, it is demonstrated that the effects of confinement on molecular dynamics depend, inter alia, on the dimensionality of the restricting space.     

Wi‐Fi‐based modeling and hybrid routing scheme for delay‐tolerant public bus network

Delay‐ or Disruption‐Tolerant Networking (DTN) is a communications approach that is utilized in easily disrupted or delayed networks. Examples of such networks are often found in heterogeneous networks, mobile or extreme terrestrial networks, and planned networks in space. In this paper, we examine the metropolitan bus network as a research target of DTN for a public transport network. We analyze the metropolitan bus network through spatial and temporal modeling using an existing Bus Information System (BIS) database. On the basis of the results of our analysis, we propose and design an appropriate DTN routing scheme called Hybrid Position‐based DTN Routing. This scheme uses position‐based routing instead of address‐based routing by soliciting infrastructural help from nearby Access Points for the real‐time BIS location service. We simulated our scheme using a WLAN for the wideband DTN communication and evaluated it by comparing it with traditional Ad hoc flooding, Epidemic routing, and strategic protocol steps in our own algorithm. The results indicate that our scheme achieves reasonably high performance in terms of packet delivery ratio, latency, and resource usage. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecular structural investigations of quinoxaline derivatives through 3D-QSAR,molecular docking,ADME prediction and pharmacophore modeling studies for the search of novel antimalarial agent

In the present article, a dataset of 63 quinoxaline derivatives were taken for antimalarial activity and pharmacophore were developed. Atom based method was used to develop a three dimensional quantitative structure activity relationship (3D-QSAR) model. On comparison of all statistical parameters, model AHRRR23 was found to be the most effective and predictive QSAR model as it satisfied all statistical parameters of a good model. The model AHRRR23 showed an adequate R² value for the training set 0.9446, good predictive power with Q² of 0.6409, good F- value, low SD 0.1218 value and outstanding Pearson-R values and low RMSE 0.2779 values of the model. The docking studies also gives very good results with good RMSD values. 3D QSAR, docking and ADME studies exhibits that the developed model could be employed as a potential lead for further study as antimalarial drug.     

Development of fish gelatin-based artificial fish baits incorporating bioattractants from seafood processing waste

The study dealt with evolving an artificial fish bait by incorporating bioattractant concentrates derived from seafood processing wastes by enzymatic hydrolysis namely fish waste concentrate (FWC), squid waste concentrate (SWC), and shrimp processing concentrate (SPWC). They were characterized based on amino acid content and presence of different functional groups using FTIR. Among them, SWC was found to have the highest amino acid content of 60.85mg/100 mg followed by FWC (42.21mg/100 mg) and SPWC (24.82mg/100 mg). The developed artificial fish baits were subjected to protein leaching, solubility in seawater besides testing for acceptability by the red snapper. The study revealed that the bait incorporated with SWC at 3% level was found be the most ideal, with the protein leaching rate of 24.82 mg/g/h, solubility rate of 36.6 mg/g/h and the attractability score of 29/30. The amino acid leaching rate was 3.11 mg/h/100 mg and it was found to contain five amino acids such as glycine, proline, glutamic acid, alanine and serine. The study revealed that the hydrolyzed squid waste concentrate can be incorporated at 3% (w/w) with fish gelatin based biomatrix during gelation to prepare artificial bait.