Effect of cooling rate on microstructure of friction-stir welded AA1100 aluminum alloy

In this work, the microstructural changes occurring during cooling of friction-stir welded aluminum alloy AA1100 were evaluated. To this end, friction-stir welding (FSW) was performed in a wide range of cooling rates of 20–62 K/s and the evolved microstructures were studied by using electron backscatter diffraction. Below 0.6 T_m (T_m being the melting point), the stir zone material was found to experience no significant changes during cooling. At higher FSW temperatures, however, notable changes occurred in the welded material, including grain growth, sharpening of texture, reduction of the fraction of high-angle boundaries and material softening.     

Low‐Fouling Electrosprayed Hemoglobin Nanoparticles with Antioxidant Protection as Promising Oxygen Carriers

Despite all the attempts to create advanced hemoglobin (Hb)‐based oxygen carriers (HBOCs) employing an encapsulation platform, major challenges including attaining a high Hb loading and long circulation times still need to be overcome. Herein, the fabrication, for the first time, of nanoparticles fully made of Hb (Hb‐NPs) employing the electrospray technique is reported. The Hb‐NPs are then coated by antioxidant and self‐polymerized poly(dopamine) (PDA) to minimize the conversion of Hb into nonfunctional methemoglobin (metHb). The PDA shell is further functionalized with poly(ethylene glycol) (PEG) to achieve stealth properties. The results demonstrate that the as‐prepared Hb‐NPs are hemo‐ and biocompatible while offering antioxidant protection and decreasing the formation of metHb. Additionally, decoration with PEG results in decreased protein adsorption onto the Hb‐NPs surface, suggesting a prolonged retention time within the body. Finally, the Hb‐NPs also preserve the reversible oxygen‐binding and releasing properties of Hb. All in all, within this study, a novel HBOCs with high Hb content is fabricated and its potential as an artificial blood substitute is evaluated.     

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

Microfunnel‐filter‐based emulsification microextraction followed by gas chromatography for simple determination of organophosphorus pesticides in environmental water samples

A simple and fast method named microfunnel‐filter‐based emulsification microextraction is introduced for an efficient determination of some organophosphorus pesticides including diazinon, malathion, and chlorpyrifos in the environmental samples including the river, sea, and well water. This method is based upon the dispersion of a low‐toxicity organic solvent (dihexyl ether), as the extractant, in a high volume of an aqueous sample solution (45 mL). It is implemented without a centrifugation step, and using a syringe filter and a micro‐funnel, the phase separation and transfer of the enriched analytes to the gas chromatograph are simply achieved. By filtration of the extractant phase, a suitable sample clean‐up is obtained, and the total extraction time is just a few minutes. The factors influencing the extraction efficiency are optimized, and under the optimal conditions, the proposed method provides a good linearity (in the range of 15–1500 ng/mL (R² > 0.996). A high enrichment factor is obtained (in the range of 306–342), and the method provides low limits of detection and quantification (in the ranges of 4–8 and 15–25 ng/mL, respectively).     

Multistrain edge‐based compartmental model on networks

Multistrain diseases, which are infected through individual contacts, pose severe public health threat nowadays. In this paper, we build competitive and mutative two‐strain edge‐based compartmental models using probability generation function (PGF) and pair approximation (PA). Both of them are ordinary differential equations. Their basic reproduction numbers and final size formulas are explicitly derived. We show that the formula gives a unique positive final epidemic size when the reproduction number is larger than unity. We further consider competitive and mutative multistrain diseases spreading models and compute their basic reproduction numbers. We perform numerical simulations that show some dynamical properties of the competitive and mutative two‐strain models.     

Comparison of Penta and Tetra-pyridyl Cobalt-based Catalysts for Water Reduction: H2 Production Cycle,Solvent Response and Reduction Free Energy

Understanding water reduction towards H₂ generation is crucial to overcome today's renewable energy obstacles. Previous studies have shown the superior H₂ production performances of Cobalt based penta-pyridyl (CoaPPy) and tetra-pyridyl (CoaTPy) complexes in solution. We investigate H₂ production cycles of CoaPPy and CoaTPy complexes immersed in water solution by means of Ab-initio Molecular Dynamics and Density Functional Theory. We monitor dynamic properties of the systems, solvent response and structural changes occurring in the catalysts, by simulating all intermediate steps of the H₂ production cycle. Reduction free energies and reorganization energies are calculated. Our results show that, following the first electron injection, H₂ production proceeds with the singlet spin state. Following the first electron insertion, we observe a significant rearrangement of the hydrogen bonding network in the first solvation shell. The cobalt center turns out to be more accessible for the surrounding water molecules in the case of CoaTPy at all the intermediate steps, which explains its higher catalytic performance over CoaPPy. Following the first reduction reaction, a larger gain in reduction free energy is estimated for CoaTPy with respect to CoaPPy, with a difference of 0.14 eV, in line with the experiments. For the second reduction, instead, CoaPPy shows more negative reduction potential, by 0.41 eV.     

Allostatic load as a complex clinical construct: A case‐based computational modeling approach

Allostatic load (AL) is a complex clinical construct, providing a unique window into the cumulative impact of stress. However, due to its inherent complexity, AL presents two major measurement challenges to conventional statistical modeling (the field's dominant methodology): it is comprised of a complex causal network of bioallostatic systems, represented by an even larger set of dynamic biomarkers; and, it is situated within a web of antecedent socioecological systems, linking AL to differences in health outcomes and disparities. To address these challenges, we employed case‐based computational modeling (CBM), which allowed us to make four advances: (1) we developed a multisystem, 7‐factor (20 biomarker) model of AL's network of allostatic systems; (2) used it to create a catalog of nine different clinical AL profiles (causal pathways); (3) linked each clinical profile to a typology of 23 health outcomes; and (4) explored our results (post hoc) as a function of gender, a key socioecological factor. In terms of highlights, (a) the Healthy clinical profile had few health risks; (b) the pro‐inflammatory profile linked to high blood pressure and diabetes; (c) Low Stress Hormones linked to heart disease, TIA/Stroke, diabetes, and circulation problems; and (d) high stress hormones linked to heart disease and high blood pressure. Post hoc analyses also found that males were overrepresented on the High Blood Pressure (61.2%), Metabolic Syndrome (63.2%), High Stress Hormones (66.4%), and High Blood Sugar (57.1%); while females were overrepresented on the Healthy (81.9%), Low Stress Hormones (66.3%), and Low Stress Antagonists (stress buffers) (95.4%) profiles. © 2015 Wiley Periodicals, Inc. Complexity 21: 291–306, 2016     

A computational method for geometric optimization of enhanced heat transfer devices based upon entropy generation minimization

A computational fluid dynamics‐based optimization methodology is developed, appropriate for the geometric optimization of enhanced heat transfer devices based upon the principle of entropy generation minimization, in which the objective function is evaluated from a flow field obtained by computational simulation. A quasi‐Newton optimization procedure is employed, with computation of the objective function gradients based upon a finite difference approach. The optimization procedure is developed to be general with regard to the choice of objective function, the details of the problem under consideration, and the computational methodology employed in solving the fluid flow and heat transfer problems. A novel implementation of a Taylor series‐based procedure for the fast solution of nearby problems is presented, which is found to greatly benefit the efficiency of the present methodology. Finally, a numerical experiment is presented, illustrating the use of the present method in the geometric optimization of a practical enhanced heat transfer device on the basis of the criterion of entropy generation minimization. The optimization of the fin spacing of a simple plate fin heat sink is considered, and a comparison of the computational results with results obtained by analytical optimization based upon empirical friction factor and Nusselt number correlations is given. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of guar gum-based hydrogel for sugarcane field solid conditioning

The water crisis is increased everywhere in recent years, which has affected the water demand in different sectors like industries, agriculture, residential, etc. The present research aims to the development of superabsorbent polymer (SAP) using bio-material. The hydrogel is synthesized by grafting Guar gum (GG) with methyl methacrylate (MMA) and crosslinking with polyethylene glycol (PEG). The developed GG-based hydrogelwas characterized by various analytical instruments. The Scanning Electron Microscopy (SEM) demonstrated hydrogels havepores of size 50 ​μm–10 ​μm. The Transmission Electron Microscopy (TEM) analysis has shownthat thematerial consists of spherical shapesand particles of size 141.11nm–182.19 ​nm.The Fourier-Transform Infrared Spectroscopy (FTIR) and Thermogravimetric analysis (TGA) study have confirmedthepresence of functional groups of material, and thermal resistivity. The absorption capacity of developed hydrogelwas found to be 110 ​ml per gram (110% of its dry weight). The hydrogelwasapplied in the field of sugarcane crop and measured soil moisture content after 20 days of application. A better resultwas found of moisture content in the area of hydrogel application (28%) compared to the area without hydrogel application (10%). Moreover, the comparison of different hydrogels is also shown in a study, and the developed hydrogel proves good moisture retention capacity. This technology could be promising in terms of improving perennial crop productivity and combating moisture stress in agriculture. As a soil conditioning material for agricultural applications, the synthesized hydrogel showed tremendous potential.