某会议室夏季工况不同送风方式下的气流组织数值模拟研究

采用数值模拟软件对××大学科技馆某小型会议室进行数值模拟,以实际测量的数据为边界条件,建立合适的数学和物理模型,得到温度场、速度场以及空气品质场等模拟结果,通过对模拟结果的对比分析,得到了最佳的气流组织设计方案,相关结论可以为室内气流组织方案设计与优化提供参考依据.     

卧式净化空调机组相关问题探讨

简要地探讨了目前卧式净化空调机组设计中常见的问题,并结合笔者在净化空调调试的实践经验,提出了一些建议。     

医院手术室不同通风情况的生物污染控制

在同样房间换气次数下,改变送风速度和出风面积,对OR.B手术室进行了数值模拟以比较在手术关键区(围绕患者手术切口的三个相连区域)的细菌沉降数量。结果表明改进气流流型可以降低关键区域的微粒沉降量,但效果并不如增加换气次数至某个恰当量那么明显。     

多项式偏最小二乘法对非线性体系红外谱图的分析

文章利用了一种非线性模型多项式偏最小二乘法(PPLS),结合傅里叶变换红外光谱遥感技术,对大气中的五组分混合体系进行了同时分析。并与偏最小二乘法(PLS)得到的结果进行了比较,PPLS显示出较好的处理非线性数据的能力。尤其是对混合物中的苯和氯仿的预测,均方根预测误差(RMSEP)分别是0.043和0.087,用PLS预测相应的RMSEP为0.402和0.842。PPLS的这一预测精度,可以满足遥感傅里叶变换红外光谱对大气中有毒气体的实时、在线监测的需要。同时PPLS可以用较少的潜变量对变量进行解释,显示出PPLS模型的稳健性和简单化。     

工业SO2及碳黑颗粒紫外成像遥感监测技术

为了准确有效监测工业烟囱排放,基于SO2及碳黑颗粒物的光学特性,设计并研制出一套双通道紫外成像遥感监测系统.该成像系统的两个光谱通道的中心波长分别定于310 nm和330 nm,利用两个通道的光学厚度之差反演SO2浓度图像,颗粒物浓度图像由330 nm通道获取,根据浓度图像结合光流法获取烟羽运动速度,进而计算得出SO2和碳黑颗粒物的排放速率.结果表明,该工业烟囱的SO2及碳黑颗粒物排放速率分别为72.48±3.16 kg/h和6.33±1.18 kg/h.实验采用紫外相机同时对工业烟囱排放的SO2及碳黑颗粒物进行监测,实验表明双通道紫外成像遥感监测兼具高时间分辨率与高空间分辨率,测量结果准确直观,在工业废气污染、船舶尾气污染以及火山喷发污染排放遥感监测中具有非常明显的技术优势及巨大的应用前景.     

Investigation of ammonia stripping with a hydrodynamic cavitation reactor

Ammonia is a commonly used compound in the domestic and industrial fields. If ammonia found in wastewater after use is not treated, even at low concentrations it may cause toxic effects in the receiving environment. In this study, a hydrodynamic cavitation reactor (HDC) was designed with the aim of removing ammonia. The effect of parameters like different cavitation numbers, airflow, temperature and initial concentration on NH₃ removal was researched. The potential of hydrodynamic cavitation for removal of volatile gases, like NH₃, was assessed with the aid of two film theory mathematical equations. Experimental studies were performed at fixed pH = 11. Under the conditions of 0.12 cavitation number, 25 L/min airflow, 30 °C temperature and 2500 mg/L initial concentration, in 24 h 98.4% NH₃ removal efficiency was achieved. With the same experimental conditions without any air, the HDC reactor provided 89.5% NH₃ removal at the end of 24 h.The HDC reactor is very effective for the removal of volatile gases from wastewater and it was concluded that even in the absence of aeration, the desired NH₃ removal efficiency was provided.     

沸石分子筛材料在消除挥发性有机化合物反应中的吸附与催化性能

作为空气污染物的主要成分之一,挥发性有机化合物(VOCs)会极大地破坏生态环境并损害人体健康。在众多消除 VOCs的方法中,吸附法由于操作简单、成本低廉的优势而在工业上得以广泛应用。催化燃烧法则因去除效率高,适用范围广且无二次污染等优点被认为是 VOCs消除最有效的手段之一。
　　目前,活性炭是最常用的 VOCs吸附剂,但存在再生困难、抗湿性差、易燃等诸多问题。与活性炭等常规吸附剂相比,沸石分子筛作为 VOCs吸附剂其主要优势在于：(1)沸石分子筛的疏水性可调,通过调控分子筛骨架的硅铝比可以调节分子筛的亲疏水性,高硅铝比的沸石分子筛有着优异的疏水性能,从而可以有效降低在一定湿度条件下水对 VOCs分子的竞争吸附;(2)均一的孔径分布可以有效地进行分子识别,从而使吸附剂对VOCs的选择性吸附性大大提高;(3)沸石分子筛一般由硅铝构成,本身不可燃且水热稳定性好,因此能够与微波加热等其他手段相结合以降低吸附剂重生能耗,提高操作安全性;(4)沸石分子筛比表面积大,吸附容量高,是作为蜂窝转轮吸附技术中吸附剂的理想材料,而该技术是目前工业大规模消除VOCs的研究热点。因此,沸石分子筛由于其独特的性质,被视为一种简单高效、选择性好的VOCs吸附剂。现阶段,催化燃烧VOCs所使用的催化剂常用金属氧化物作为载体,但是金属氧化物比表面积相对较小且孔道结构不均一,因此严重影响了催化剂对VOCs的催化燃烧效率,限制了催化燃烧活性的提高。而与金属氧化物载体相比,沸石分子筛材料具有均一的孔道结构以及相对较大的比表面积等优点,而将具有较好吸附选择性和吸附容量的沸石分子筛作为载体,负载活性组分后可以实现催化剂催化燃烧性能的显著提高,从而成为VOCs催化燃烧的理想催化剂。
　　本文综述了目前沸石分子筛材料作为吸附剂和催化剂载体的负载型催化剂消除各类VOCs的研究进展。对于沸石分子筛作为VOCs吸附剂,我们小结了影响其吸附容量和吸附选择性的因素,发现分子筛的孔道大小和阳离子类型与VOCs的吸附情况密切相关。在此基础上,进一步简单介绍了分子筛蜂窝吸附转轮技术的研究现状。对于沸石分子筛作为催化剂载体,我们总结了其用于各类VOCs催化燃烧的研究情况,如烷烃类、芳烃类和醛类等。探究了催化性能的影响因素及相应的催化机理,发现分子筛的孔道结构、阳离子类型、硅铝比等都会显著影响沸石分子筛负载型催化剂的催化活性。最后,探讨了沸石分子筛应用于VOCs消除目前所存在的问题,同时展望了该领域未来的研究和发展方向。     

Air sampling of aromatic hydrocarbons in the presence of ozone by solid-phase microextraction

Effects of ozone on air sampling of standard gas mixtures of aromatic hydrocarbons were tested using solid-phase microextraction (SPME). Standard concentrations of ozone ranging from 10 ppb (v/v) to 6400 ppm (v/v) were generated using an in-house built ozone generator based on corona discharge. Effects of temperature, discharge voltage, and oxygen flow on the ozone generation were tested. The working dc voltage had the greatest effect on generated ozone concentration and was proportional to the ozone concentration. Generation temperature and oxygen flow rate were inversely proportional to ozone concentrations. Produced ozone was mixed with standard benzene, toluene, ethylbenzene, and xylenes (BTEX) gas at less than 100 ppb (v/v). Air samples were collected with poly(dimethylsiloxane) (PDMS) 100 microm SPME fibers and analyzed by gas chromatography (GC)-flame ionization detection (FID) and GC-MS. Significant reductions of BTEX concentrations were observed. In addition, some products of BTEX-ozone-oxygen reactions were identified. SPME worked well as a rapid sampler for BTEX and BTEX-ozone-oxygen reaction products. No significant deterioration of the PDMS coating and no significant reduction of absorption capacity were observed after repeated exposure to ozone.     

NUMERICAL SIMULATION WITH A COMPREHENSIVE CHEMICAL TRANSPORT MODEL OF NITRATE, SULFATE, AND AMMONIUM AEROSOL DISTRIBUTIONS OVER EAST ASIA

The transport and chemical production processes of nitrate, sulfate, and ammonium aerosols over East Asia were investigated by use of the Models-3 Community Multi-scale Air Quality （CMAQ） modeling system coupled with the Regional Atmospheric Modeling System （RAMS）. For the evaluation of the model＇s ability in depicting their 3-dimensional concentration distributions and temporal variations, modeled concentrations of nitrate, sulfate, and ammonium aerosols are compared with the observations obtained at a ground station in Japan in March 2001 and onboard of an aircraft DC-8 on 18 and 21 March 2001 during the Transport and Chemical Evolution over the Pacific （TRACE-P） field campaign. Comparison shows that simulated values of nitrate, sulfate, and ammonium aerosols are generally in good agreement with their observed data, and the model captures most important observed features, and reproduces temporal and spatial variations of nitrate, sulfate, and ammonium aerosol concentrations reasonably well, e.g., the timing and locations of the concentration spikes of nitrate, sulfate, and ammonium aerosols are well reproduced, but large discrepancies between observed and simulated values are also clearly seen at some points and some times due to the coarse grid resolution and uncertainties of the emissions used in this study. This comparison results indicate that CMAQ is able to simulate the distributions of nitrate, sulfate, and ammonium aerosols and their related species in the troposphere over East Asia reasonably well.     

屏蔽门系统站台客流高峰与非高峰期空气品质的对比分析

采用Airpak对地铁站台公共区夏季四种客流工况进行数值模拟,给出了地铁站台空气品质评价标准.基于地铁站台空气品质的评价标准,对屏蔽门系统站台客流高峰与非高峰期CO2浓度、热舒适性、PM2.5浓度展开对比分析.