基于锁相环电源噪声引起的周期抖动分析

针对电源噪声在时钟电路的锁相环中引起的抖动问题，通过分析周期抖动和相位抖动与电源噪声间的关系，提出了用于预测电源噪声引起的锁相环抖动峰峰值的计算公式。文中预测的抖动峰峰值与HSPICE的仿真结果间的误差最大为3%，说明了文中公式的有效性。     

Inductive effect for the phase stability in hydrogen bonded liquid crystals,x-(p/m)BA:9OBAs

A new series of hydrogen bonded liquid crystal (HBLC) complexes, made up with substituted benzoic acids (BAs) and nonyloxy benzoic acid, viz., x-(p/m)BA:9OBAs are reported for x = F, Cl, Br and –CH₃ substituted at para (p) or meta (m) positions of BA moiety. Proton nuclear magnetic resonance (¹H-NMR) spectrum confirms the HBLC complex. Infra red (IR) spectrum confirms linear, double and complementary type of hydrogen bonding (HB) between x-(p/m)BAs and 9OBA. The liquid crystal (LC) phases are characterised by polarisation optical microscopy (POM) and differential scanning calorimetry (DSC) techniques. x-(p/m)BA:9OBA exhibit N, C and G LC phase variance. HB induces tilted phases and enhances LC phase stability. The influence of configuration, size, electronegativity, electron directing capacity and inductive nature of substituent (x) is investigated for the stability of LC phases. An overview of the LC phase data indicates predominant ‘negative inductive effect’ in HBLCs with electron withdrawing substituents. Inductive effect operates effectively for para substitutions. Results are discussed in the wake of reports in other HBLCs.     

Development and validation of a high‐performance liquid chromatography method for determination of lisinopril in human plasma by magnetic solid‐phase extraction and pre‐column derivatization

A sensitive, reliable and simple HPLC method was developed for the determination of lisinopril in human plasma. The method consists of extraction and clean‐up steps based on magnetic solid‐phase extraction and pre‐column derivatization with a fluorescent reagent. The mobile phase consisted of a mixture of methanol–sodium dihydrogen phosphate (pH 3.0; 0.005 m ; 75:25, v/v). The flow rate was set at 0.7 mL/min. Fluorescence detection was performed at 470nm excitation and 530nm emission wavelengths. Total chromatography run time was 5 min. The average extraction recovery of lisinopril and fluvoxamine (internal standard) was ≥82.8%. The limits of detection and quantification were determined as 1 and 3 ng/mL respectively. The method exhibited a linear calibration line over the concentration range of 3–1000 ng/mL with coefficient of determination (r²) of ≥0.98. The within‐run and between‐run precisions were satisfactory with values of CV of 1.8–12.8% (accuracy from 99.2 to 94.7%) and 2.4–13.7% (accuracy from 99.5 to 92.2%), respectively. These developments led to considerable improvement in method sensitivity and reliability. The method was validated according to the US Food and Drug Administration guidelines. Therefore, it can be considered as a suitable method for determination of lisinopril in plasma samples.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes: Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile (PAN) and an additive of polyvinylpyrrolidone (PVP), which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm² and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

Face-centred cubic to body-centred cubic phase transformation under [1 0 0] tensile loading

Molecular dynamics simulation was used to verify a speculation of the existence of a certain face-centred cubic (FCC) to body-centred cubic (BCC) phase transformation pathway. Four FCC metals, Ni, Cu, Au and Ag, were stretched along the [1?0?0] direction at various strain rates and temperatures. Under high strain rate and low temperature, and beyond the elastic limit, the bifurcation of the FCC phase occurred with sudden contraction along one lateral direction and expansion along the other lateral direction. When the lattice constant along the expansion direction converged with that of the stretched direction, the FCC phase transformed into an unstressed BCC phase. By reducing the strain rate or increasing the temperature, dislocation or ‘momentum-induced melting’ mechanisms began to control the plastic deformation of the FCC metals, respectively.     

ECC fault attack algorithm based on Grover's quantum search algorithm with 0.1π phase rotation

The Grover's a1gorithm was used for fau1t attack against the pub1ic key cryptography.A fixed phase rotation based Grover's a1gorithm was proposed，and the probabi1ity of success achieved 99.23% with 0.1π phase rotation.Combined with the fau1t attack further，ECC（e11iptic curve cryptography）vo1tage burr attack a1gorithm based on Grover a1gorithm with 0.1π phase rotation was proposed.Then a safety Kob1itz curve，K-163，pub1ished successfu11y attacked by NIST on binary domain in simu1ation and the success rate was 100%.The comp1exity of the attack great1y reduces on the exponentia1.It was a new effective way，except the Shor's a1gorithm，to attack pub1ic key cryptography by quantum computing，and it contributed to extend the attack ways to the other pub1ic key cryptography.     

Global hysteresis in ferroelectrics with incommensurate phases

A review of the basic experimental results connected with the formation of long-living metastable states in the incommensurate phases of ferroelectric crystals and related phenomena is given. The interpretation and appropriate physical mechanisms underlying the global hysteresis phenomena associated with these states are considered.     

Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity

The properties and behaviour of an α−β colony Ti-6242 alloy have been investigated at 20 °C utilising coupled micro-pillar stress relaxation tests and computational crystal plasticity. The β-phase slip strength and intrinsic slip system strain rate sensitivity have been determined, and the β-phase shown to have stronger rate sensitivity than that for the α phase. Close agreement of experimental observations and crystal plasticity predictions of micro-pillar elastic-plastic response, stress relaxation, slip activation in both α and β-phases, and strain localisation within the α−β pillars with differing test strain rate, β morphology, and crystal orientations is achieved, supporting the validity of the properties extracted. The β-lath thickness is found to affect slip transfer across the α−β−α colony, but not to significantly change the nature of the slip localisation when compared to pure α-phase pillars with the same crystallographic orientation. These results are considered in relation to rate-dependent deformation, such as dwell fatigue, in complex multiphase titanium alloys.