电力电子变换器中滤波电容参数设计方法

在电力电子变换器中,滤波电容可以抑制电压脉动,消除谐波,其参数大小对变换器的性能有着重要影响。本文首先分析滤波电容器的特性,得出影响电容器滤波效果的各个因素,然后介绍了几种常用的滤波电容器参数设计方法,最后通过一个全桥变换器进行了仿真验证,有助于学生更好地掌握滤波电容器的参数设计。     

Perfect reconstruction of uniform samples from K-th order nonuniform samples

In this paper, we propose a new discrete-time model which relates uniform samples and K-th order nonuniform (KONU) samples. Typically, such situations may occur in practice where the sampling rates of analog-to-digital converters (ADCs) in a cluster of sensors may be different. This paper also outlines a digital signal processing approach to reconstructing uniform samples from the nonuniform samples produced by time interleaving analog-to-digital converters (TI-ADCs) with different sampling rates and time-mismatches.     

几种新型的Interleaver改进方案

针对interleaver的不同实现方案,介绍了几种新颖的改进结构。首先分析了改进方案的原理,之后对新旧结构的性能进行了比较,结果显示了新方案的性能优异性。这些新颖的设计无疑将对Inter-leaver的成熟商用起着极大的推动作用。     

Digital Cross-Correlation Detection of Multi-Laser Beams Measuring System for Wind Field Detection

A cross-correlation detection method to process backscatter signals of multi-laser beams measuring(MLBM) is presented,which can be firstly filtered by the digital filter composed of average median filter and finite impulse response(FIR) digital filter.The processing of backscatter signals using single-pulse and three-pulse cross-correlation detection methods is depicted in detail.From calculation results,the multi-pulse cross-correlation detection could effectively improve signal-to-noise ratio(SNR).Finally,both wind velocity and direction are determined by the peak-delay method based on the correlation function which shows high measuring precision and high SNR of the MLBM system with the assistance of the digital cross-correlation detection.     

受限视觉下RoboCup3D中机器人的定位

针对RoboCup3D中机器人视觉模型的重大改变,即由原来的完美视觉模型变为受限视觉模型,在综合完美视觉下机器人的定位方法,即陀螺仪定位、1个标志杆定位,3个标志杆定位,提出一种受限视觉下机器人自身定位策略,并应用卡尔曼滤波器来提高定位的精度,在Rcssserver3D仿真环境中进行了定位数据的采样和对比,实验表明此定位方法具有很好的竞赛适应性与健壮性。     

飞机交流电源测频电路低通滤波器的设计与仿真

针对型号研制过程中出现的交流电源频率测量出现跳变的问题,进行了故障定位和原因分析,并提出了解决方案。设计了适用于飞机交流电源系统频率测量电路的低通滤波器,对其特性进行了计算分析,并基于SIMULINK建立了滤波器的模型,进行了仿真验证,结果表明设计的滤波器是有效的。     

彩色滤光膜色度测试系统的研究

彩色滤光膜(CF)色度指标对彩色液晶显示器的显示性能有着重要的影响,采用传统的分光光度计测量CF光谱透过率存在着严重的混光现象,研究分析了CF色度参数的表征与测试原理,设计了高精度的显微光谱测试系统。系统能够精密测试50μm尺寸样品的光谱特性,并且得到±0.005的色度座标测试精度。系统已应用在彩色滤光膜与彩色液晶显示器生产企业,取得了良好的效果。     

BeO瓷的金属化和封接

综述了氧化铍瓷的金属化及其封接技术,指出氧化铍瓷和Al2O3瓷在金属化工艺上的差异,论文最后汇集了国内外常用烧结金属粉末法15种配方和工艺参数,以资同行专家参考.     

Compact VDTA-based current-mode electronically tunable universal filters using grounded capacitors

This paper presents a compact current-mode three-input single-output (TISO) type universal filter. Only one voltage differencing transconductance amplifier (VDTA) and two grounded capacitors are employed in the proposed filter. The circuit can realize lowpass, bandpass, highpass, bandstop and allpass biquadratic filter outputs by connecting the appropriate inputs, and offers electronic control of the natural angular frequency (ω₀) and quality factor (Q) by means of adjusting the transconductance gain of the VDTA. In addition, by slight modification of the proposed scheme, another more useful TISO construction with orthogonal ω₀–Q tuning has been obtained. Both the discussed universal filters have been shown to have low incremental active and passive sensitivities. To demonstrate the performances of the filters and verify the theoretical analysis, computer simulations are accomplished with the PSPICE program.