IEEE 802.11b DCF三维Markov非饱和链路模型

为了准确评估实际网络中IEEE 802.11b分布式协调功能(Distributed Coordination Function,DCF)的系统性能,提出了一种三维Markov链路模型,该模型综合考虑了DCF协议退避计数器冻结状态和有限重传次数,并结合M/M/1/K排队模型给出了在负载有限的情况下DCF系统性能的理论模型。仿真结果表明,该模型能准确地预测IEEE 802.11b DCF协议的系统性能。     

Simultaneous effect of carbon and water on NOx adsorption on a stabilized Pt–Ba/Al2O3 catalyst

The influence of the presence of H₂O on the contact between carbon, used as model soot, and a model four-way catalyst (1% Pt–10% BaO/Al₂O₃) was investigated. NO_x adsorption/TPD cycles at 300 °C together with XRD, XPS and DRIFTS characterizations showed that only surface nitrate species are destabilized by the carbon present in the catalytic bed, leading to a decrease of the NO_x storage capacity and carbonate species formation. In another way, injection of water in the reactive gas flow decreases also the NO_x storage capacity of the catalyst, but promotes the formation of stable nitrate species. A non-cumulative effect of carbon and water was observed. It was proposed that a competition between the destabilization, by carbon, of weakly bonded surface nitrate species and the enhancement of bulk nitrate species formation in the presence of water occurs.     

A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.     

Superheating in linear polymers studied by ultrafast nanocalorimetry

To study phase transition kinetics on submillisecond time scale a sensitive ultrafast nanocalorimeter was constructed. Controlled ultrafast cooling, as well as heating, up to 10⁶K/s was attained. The method was applied for the measurements of the superheating phenomenon in a set of linear polymers: iPS, PBT, PET, and iPP. A power law relation between the superheating and the heating rate holds in the heating rate range 10^-2-10⁴K/s. A limiting superheating of about 10% of the melting temperature was observed at rates above 10⁴-10⁵K/s. This limit depends on annealing conditions before sample melting. The observed superheating limit, as well as the power law, can be accounted for the internal stresses near the crystalline amorphous interface in semicrystalline polymers induced by heating, which are related to the thermal expansion gradients inherent in a semicrystalline material.     

Finite-stretching corrections to the Milner-Witten-Cates theory for polymer brushes

This paper investigates finite-stretching corrections to the classical Milner-Witten-Cates theory for semi-dilute polymer brushes in a good solvent. The dominant correction to the free energy originates from an entropic repulsion caused by the impenetrability of the grafting surface, which produces a depletion of segments extending a distance μ∝L^-1 from the substrate, where L is the classical brush height. The next most important correction is associated with the translational entropy of the chain ends, which creates the well-known tail where a small population of chains extend beyond the classical brush height by a distance ξ∝L^-1/3. The validity of these corrections is confirmed by quantitative comparison with numerical self-consistent field theory.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

Multifractal detrended fluctuation analysis of derivative and spot markets

We investigate the multifractal properties of price increments in the cases of derivative and spot markets. Through the multifractal detrended fluctuation analysis, we estimate the generalized Hurst and the Renyi exponents for price fluctuations. By deriving the singularity spectrum from the above exponents, we quantify the multifractality of a financial time series and compare the multifractal properties of two different markets. The different behavior of each agent-group in transactions is also discussed. In order to identify the nature of the underlying multifractality, we apply the method of surrogate data to both sets of financial data. It is shown that multifractality due to a fat-tailed distribution is significant.     

Decay rate with coordinate-dependent diffusion coefficients

Using a master equation for the reduced density matrix of open quantum system, the influence of coordinate-dependent microscopical diffusion coefficients on the decay rate from a potential well is studied. For different temperatures, frictions, heights of barrier and ratios of stiffnesses of the potential in the minimum and on the top of the barrier, the quasistationary decay rates are obtained with the sets of coordinate-dependent and -independent microscopical diffusion coefficients, and coordinate-dependent phenomenological diffusion coefficients.     

Thermal and Nonthermal Effects in Plasmon-Mediated Electrochemistry at Nanostructured Ag Electrodes

Hot carriers (HCs) and thermal effects, stemming from plasmon decays, are crucial for most plasmonic applications. However, quantifying these two effects remains extremely challenging due to the experimental difficulty in accurately measuring the temperature at reaction sites. Herein, we provide a novel strategy to disentangle HCs from photothermal effects based on the different traits of heat dissipation (long range) and HCs transport (short range), and quantitatively uncover the dominant and potential-dependent role of photothermal effect by investigating the rapid- and slow-response currents in plasmon-mediated electrochemistry at nanostructured Ag electrode. Furthermore, the plasmoelectric surface potential is found to contribute to the rapid-response currents, which is absent in the previous studies.