On some semilattice structures for production technologies

Tracing back from Charnes et al. [9] many approaches have been proposed to extend the DEA production model to non-convex technologies. The FDH method were introduced by Deprins et al. [13] and it only assumes a free disposal assumption of the technology. This paper, continues further an earlier work by Briec and Horvath [7]. Among other things, a new class of semilattice production technologies is introduced. Duality results as well as computational issues are proposed.     

HSPA+网络性能分析和部署探讨

主要从应用场景、基带资源分配、传输配置、载波策略等4个方面提出了HSPA+网络规划建议,并结合MIMO、DC-HSDPA技术提出了现网演进策略。     

Analysis of Joint Multiband Sensing‐Time M‐QAM Signal Detection in Cognitive Radios

We analyze a wideband spectrum in a cognitive radio (CR) network by employing the optimal adaptive multiband sensing‐time joint detection framework. This framework detects a wideband M‐ary quadrature amplitude modulation (M‐QAM) primary signal over multiple nonoverlapping narrowband Gaussian channels, using the energy detection technique so as to maximize the throughput in CR networks while limiting interference with the primary network. The signal detection problem is formulated as an optimization problem to maximize the aggregate achievable secondary throughput capacity by jointly optimizing the sensing duration and individual detection thresholds under the overall interference imposed on the primary network. It is shown that the detection problems can be solved as convex optimization problems if certain practical constraints are applied. Simulation results show that the framework under consideration achieves much better performance for M‐QAM than for binary phase‐shift keying or any real modulation scheme.     

SDH数字微波传输系统原理及应用

SDH数字微波传输系统广泛用于国家级及省级广播电视微波传输干线电路中,它具有传输容量大,远距离传输质量高、抗自然灾害性强等优点,是广播电视节目信号传输的主力设备。在此简明阐述了数字微波传输系统的基本原理,并结合实际详细分析了SDH数字微波传输设备在我站的具体应用,为提高微波传输电路维护水平具有一定意义。     

基于Matlab/Simulink的QAM通信系统的仿真

利用Matlab的Simulink工具箱建立了QAM系统的仿真模型,详细地叙述了仿真参数的设置,分析了仿真结果,仿真结果与理论结果一致。该仿真模型简单,而且达到了预期的效果。仿真结果表明:通过Matlab仿真数字通信系统具有较强的可实现性,为实际应用和科学合理地设计QAM通信系统,提供了高效的仿真平台。     

基于高阶循环累积量和支持矢量机的分级调制分类算法

利用观测样本的高阶循环累积量特征,提出一种基于支持矢量机的分级调制分类算法,实现了对QAM调制信号的自动识别.该算法具有较快的分类器训练速度和较低的复杂度,对时延和相位旋转具有稳健性,并可在干扰环境下实现对感兴趣信号调制类型的识别.理论分析和仿真结果均证明了算法的正确性和有效性.     

Square m-QAM相干光通信载波相位估计性能研究

基于前馈载波相位估计算法,研究了square 16-QAM调制相干光纤通信系统的载波相位估计性能,进一步证明了当存在相位噪声时square m-QAM调制并非QAM调制最佳星座图的原因。仿真计算结果显示,由于square 16-QAM调制星座图中星点之间相位距离分布不均匀,引起载波相位估计中出现连续相位跳变,导致载波估计性能劣化,系统误码率增大约2～3倍。     

800 MHz射频频率合成器的设计及相位噪声性能分析

介绍了3．5GHz宽带无线固定接入系统射频接收机中800MHz频率合成器的设计,讨论了环路滤波器以及压控振荡器等环路部件对频率合成器输出信号相位噪声性能的影响,提出了低相位噪声频率合成器的设计方法。最后结合实际系统分析了本振信号相位噪声对基带接收机16QAM解调误码性能的影响,并给出计算机仿真的结果。     

一种新的22n+1阶QAM星座图设计

该文研究了2²ⁿ⁺¹阶正交幅度调制(Quadrature Amplitude Modulation,QAM)的星座图,提出了一种可以根据格雷映射规则建立映射表的正方形QAM星座图。为了对比正方形星座图与十字形以及矩形星座图的性能,该文以32 QAM为例对3种星座图的信号功率效率进行了分析,并对三者的误码性能进行了仿真。仿真结果表明,与信道编码结合使用时,正方形星座图的误码性能优于十字形星座图和矩形星座图。而且,对于多载波通信系统,正方形星座图和十字形以及矩形星座图具有相同的信号功率效率。     

HSPA＋64QAM组网关键问题探讨

通过理论分析和外场测试,探讨了HSPA＋64QAM技术的基本原理、组网性能以及网络升级代价,为未来网络演进提供了实用性参考。