环糊精与聚1,3-二氧五环结晶内含复合物的合成与表征

合成并表征了环糊精与聚1,3-二氧五环的结晶内含复合物.聚1,3-二氧五环分子链上较高的氧原子密度使其能与3种常见的环糊精均形成结晶内含复合物.使用了红外光谱, 热重分析,X射线衍射,氢核磁共振,¹³C NMR,电子扫描显微镜对结晶内含复合物进行了研究.通过热重分析发现,结晶内含复合物比纯的环糊精更稳定.X射线衍射显示结晶内含复合物为隧道状结构.通过固体碳13交叉极化/魔角自旋核磁共振可以看出,在结晶内含复合物中环糊精的构象非常对称,而纯环糊精分子本身的构象不够对称.通过电子扫描显微镜观察了α -环糊精与聚1,3-二氧五环结晶内含复合物的表面形貌.     

β-环糊精与两性表面活性剂相互作用

用表面张力法研究了β-环糊精与十一烷基酰胺甲酸钠(C₁₁H₂₃CONHCOONa,SF)两性表面活性剂在不同温度下的包结作用。结果表明:SF的表面张力值(β)及表观临界胶束浓度(cmc^*)加入β-CD后增加,β-CD浓度越大,γ和cmc^*增加越多,且SF的cmc^*与β-CD浓度存在线性关系,随温度的升高,两性表面活性剂的表面张力值降低,意味着它们的表面活性随温度升高而增强。利用表面张力测定了β-CD-SF体系在不同温度下的包结形成常数K_a,进而求得了包结过程的焓变和熵变,结果表明,该过程是焓和熵均有利的过程,进一步说明疏水作用是形成包结物最重要的的作用力之一。     

吡嗪衍生物在石墨表面上的自组装单层膜结构

利用扫描隧道显微镜研究了荧光液晶分子2, 5-二-[2-(3, 4-二-十二烷氧基-苯基)-乙烯基]-3, 6-二甲基吡嗪(BPDP12)在石墨表面上自组装单层膜的结构. 实验结果表明, 该化合物在石墨表面形成两种自组装结构：一种是稳定的, 分子的共轭中心相互平行, 烷基链相互交错的密排结构；另一种是不稳定的, 分子的共轭中心彼此为烷基链所分隔的非密排结构. 分子之间较强的π-π作用和分子烷基链之间的范德华作用力对分子组装的取向形成竞争, 是产生两种不同组装结构的根本原因.     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

β—环糊精交联聚合物与有机显色剂客体包结反应研究

β－环糊精与环氧氯丙烷交联共聚物是一种具有三维网状结构的聚合树脂，它保留了β－环糊精所原有的与有机疏水基团形成包结物的特性，与一系列含有芳得环的有机显色剂配体（如吡啶偶氮染料，变色酸双偶氮试剂，三苯甲烷类碱性与酸性染料以及杂氧蒽酮类试剂等）均可形成相应的包结配合物，着重研究了有关包结配合物的稳定性及影响稳定性的各种因素，为进一步研究包结物分离富集痕量金属提供必要的理论依据。     

环糊精及其包结物的电化学研究及应用

本文概述了近年来环糊精及其包结物的电化学研究及应用，同时介绍了我们实验室开展的关于环糊精电化学研究的一些工作。     

四苯基卟啉铜分子的扫描隧道显微镜成像

本文首次以ＬＢ技术将四苯基卟啉铜（ＣｕＴＰＰ）分子沉积到高定向热解石墨上，并用ＳＴＭ研究其表面形貌，得到了原子级分辨的ＣｕＴＰＰ分子的表面形貌图，结果表明，ＣｕＴＰＰ分子具有近似圆状平面结构，分子直径为１．０ｎｍ，与理论结果十分吻合，结合ＳＴＭ原理，讨论了有机大分子ＳＴＭ成像的条件。     

八元瓜环与啡咯啉及其衍生物主客体配合物的研究

利用¹H NMR技术、荧光光谱法, 对八元瓜环与多种啡咯啉及衍生物相互作用形成的主客体配合物实体的结构进行了考察. 研究结果显示, 1,10-啡咯啉及其异构体1,7-啡咯啉、4,7-啡咯啉的盐酸盐“钻”进八元瓜环内腔, 形成2︰1自组装主客体包结物; 2,9二甲基-1,10-啡咯啉的盐酸盐部分进入八元瓜环形成一种比较稳定的主客体配合物; 而4,7-二甲基-1,10-啡咯啉、3,4,7,8-四甲基-1,10-啡咯啉以两种不同的π-π堆砌方式部分进入八元瓜环内腔, 形成包结比也是2︰1的两种较稳定的自组装主客体配合物异构体.     

5′-鸟苷酸与茜素红S的反应及其在分析化学中的作用

采用UVVis光谱法研究了茜素红S(ARS)与5′鸟苷酸(5′GMP)在pH4.80的弱酸性缓冲溶液中生成络合物的结合反应。与试剂比较,络合物的最大吸收峰红移92nm,测得络合物和表观摩尔吸光系数为ε=1.3×104L·mol-1·cm-1;最大结合数n=10;浓度线性范围0.2～16mg/L;检出限为6.1×10-8mol/L。研究了ARS与5′GMP是分子间作用力的结合反应,并对时间、温度、离子强度对结合反应的影响,以及无机物、生物物质对反应体系的干扰情况进行了初步研究。     

包结物晶析法选择分离辛夷挥发油中1，8-枝叶素

We used 1,1,6,6-tetraphenylhexa-2,4-diyne-1,6-diol(A) as the host molecule to selectively recognize the component 1,8-cineole(B) in the volatile oil of Flos Magnoliae(Xin Yi). The inclusion com-pound (A B) was formed as crystalline, and the structure was confirmed by means of IR, ^1H NMR, and single crystal X-ray diffraction, with the 1:2 molar ratios of the host to the guest. The component 1,8-cineole(B) was selectively isolated from the inclusion compound(A B) by Kugelrohr vaccum technology, and then further characterized by IR, ^1H NMR and ^13C NMR. The whole components in the volatile oil of Flos Magnoliae (Xin Yi) and the isolation effect of 1,8-cineole isolated from inclusion crystals were analyzed by GC and GC-MS, respectively. The result indicate that the good isolation effect is given by the inclusion method, with purity and yield of the component 1,8-cineole(B) separated from the volatile oil of Flos Magnoliae are 100% and 85%, respectively.