有机锡聚醚的合成及性质的研究

利用界面缩聚技术,将二烷基二氯化锡、二(β-烷氧羰乙基)二氯化锡与有机二元醇、酚、硫醇反应,制成了一系列新的有机锡大分子化合物.对这些新化合物进行了分子量、红外光谱、TG/DTG测试.对有机锡大分子化合物阻止聚氯乙烯(PVC)热分解性能进行了测定.结果表明,新合成的有机锡聚醚化合物可作为PVC热稳定剂使用.     

锡（Ⅱ）—1—苯基—3—甲基—4—苯甲酰基—吡唑啉酮—5—络合物吸附波的研究

在ｐＨ４．０的ＨＡｃ－ＮａＡｃ缓冲介质中，Ｓｎ（Ⅱ）与１－苯基－３－甲基－４－苯甲酰基－吡唑啉酮－５（ＰＭＢＰ）生成络合物，于－０．７４Ｖ（ｖｓ．ＳＣＥ）出现一灵敏的极谱峰。锡含量在４．２×１０－８ｍｏｌ／Ｌ～３．４×１０－６ｍｏｌ／Ｌ范围内与峰高呈线性关系，检出限为１．７×１０－８ｍｏｌ／Ｌ。用多种电化学方法研究了极谱波的性质及电极反应机理，证明该极谱波为络合吸附波，峰电流由中心离子Ｓｎ（Ⅱ）还原产生，络合物组成为Ｓｎ（Ⅱ）∶ＰＭＢＰ＝１∶１。试验了多种离子对峰电流的影响。方法已用于矿样中痕量锡的测定。     

金属锡作用下烯丙基溴与α,β-不饱和醛、酮和醌的反应

金属锡作用下烯丙基溴与α,β-不饱和醛区域选择性加成,只生成1,2-加成产物。烯丙基卤代物和锡与1,4-醌类反应,不经分离,直接氧化可得到烯丙基取代醌类。     

3-(四氯化锡)-丙酸甲酯阴离子的合成及晶体结构

在用酯基锡MeO2CCH2CH2SnCl3合成配合物MeO2CCH2CH2SnCl3·(2-OHC6H4CH=NC6H5)时,其配合物的甲苯溶液放置培养单晶时(放置十天以上)会发生分解生成配合物MeO2CCH2CH2SnCl4—·H+。研究了标题化合物的合成反应,用元素分析、IR、NMR对配合物进行了表征,并测定了晶体结构。为正交晶系,空间群为P2cn, a=7.852(2), b=12.236(1), c=16.952(4) ? V=1628.7?, Z=4, Dc=1.79g/cm3, F(000)= 860,m=22.2cm—1(Mo),R=0.0449, Rw=0.0382。标题化合物的空间构型为畸变的八面体构型,中心锡原子的配位数为6。     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.     

四甲基锡在MCM-41分子筛表面的接枝反应及产物性能

研究了真空条件下SnMe4在MCM-41分子筛表面的接枝反应，并用元素分析、ICP、GC-MS、XRD、FTIR、DRS、13C及119Sn MAS NMR、XPS、BET、TPD、TPR等方法对产物的组成、结构和性质进行了表征.结果表明, 两者可以定量地进行化学反应，将确定数目的甲基锡基团接枝在分子筛表面, 形成SnMe3/MCM-41物种；接枝反应发生在分子筛表面上, 不破坏MCM-41分子筛骨架结构；改性分子筛的BET比表面积有所降低，孔体积变小, 表面性质发生变化.四甲基锡在MCM-41上接枝反应的温度为343 K,比它与HY沸石的反应温度(193 K)高得多，并且产物SnMe3/MCM-41的热稳定性也高于SnMe3/HY.     

Synthesis, Characterization and Crystal Structure of （Z）-1-[2-（Triarylstannyl）vinyl]-1-indanols and Their Arylhalostannyl Derivatives

(Z)-1-[2-(Tri-o-tolylstannyl)vinyl]-1-indanol (1) and (Z)-1-[2-(tri-p-tolylstannyl)vinyl]-l-indanol (2) were synthesized by the addition reaction of 1-ethynylindanol with tri-o-tolyltin and tri-p-tolyltin hydride. The aryl groups in compound 1 and 2 were substituted by Br2 or I2 to yield monohalide derivatives (3-6). The compounds 1-6 were characterized by elemental analysis, ^1H NMR and FT-IR spectroscopy. The crystal structures of 1, 2 and 4 have been determined by single crystal X-ray diffraction analysis. The Sn atom in 1 and 2 exhibits a tetrahedral geometry distorted towards trigonal bipyramid due to a weak intramolecular interaction between Sn and the hydroxyl O atoms [0.2839(4) nm and 0.2744(5) nm], while the Sn atom in 4 adopts a trigonal bipyramidal geometry with a significant O→Sn(1) interaction [0.2552(5) nm].     

Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate (PTT) via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260°C after 1.5 h, while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260°C, 60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.     

二氧化碳促进的醛和酮等羰基化合物烯丙基化反应研究

加入二氧化碳可以促进羰基化合物的烯丙基化反应. 实验结果表明: 在1.0 MPa的二氧化碳和2 equiv.的锡存在下, 以THF/H₂O为反应介质, 芳香醛化合物与烯丙基溴可以顺利地发生烯丙基化反应得到较高的产率, 而芳香酮化合物和脂肪醛等与烯丙基溴反应只得到较低的产率.     

杂多阴离子的有机金属化学(Ⅲ)——缺位Keggin阴离子PWO9-34的酯基锡杂多配合物的合成及性质

利用酯基锡与缺位Keggin结构杂多阴离子PW9O9-34反应,合成了6种新的杂多阴离子--有机金属配合物M9[(R'OOCCHR"CH2SnOH2)3(PW9O34)2]·xH2O(M=(CH3)4N+,K+;R'=CH3-,CH3CH2-;R"=H,CH3-),通过元素分析、IR光谱、紫外电子光谱、1H NMR、31P NMP、183w NMR和TGA-DSC热分析等测试手段对标题配合物进行了表征和性质研究,确定该系列配合物为A-β-PW9 型夹心配合物结构.