ABO_3型厚膜酒敏器件的研制

采用厚膜技术研制了一种带有加热器的La_(1-x)Sr_xCo_(1-y)Fe_yO_3酒敏器件。介绍了器件性能测试结果,讨论了材料的气敏机理。     

超亮度彩色显像管

具备二种虑我膜的高画质超亮度彩色显像管在世界上首先被东芝开发，并且已批量生产，Ｍ滤光膜是插入在各对应萤光粉和屏玻璃间的红，绿，蓝滤色膜，另外，ＢＥ滤光膜是在屏玻璃外侧形成选择性吸收虑光膜，两者都不大会损失萤光粉的发光能量，同时选择性地吸收萤光粉的杂散发光光谱，使对比度和色再现领域得到显著的提高。原来的淡紫色荫罩管和没有滤光膜的常规管相比，对比度分别提高３６％，７４％，色再现域扩大７％，１２％。     

不同羧酯化的聚马来酸十八醇酯齐聚物的镉盐LB膜成膜特…

由聚马来酸酐和十八醇合成了一系列不同羧酯比的聚马来酸十八醇酯，并以其为成膜材料，ＣｄＣｌ２水溶液为亚相制备了一系列聚马来酸十八醇酯镉盐ＬＢ膜，借助小角Ｘ射线衍射和红外吸收光谱表征了成膜条件及羧酯比对ＣｄＰＭＡ膜有序结构的影响。在较高膜压和快速提拉条件下，低羧酯比的ＣｄＰＭＡ可得到有序性很高的Ｙ－型ＬＢ多层膜；高羧酯比的ＣｄＰＭＡ得不到高有序性的ＬＢ多层膜。     

增透膜的原理及常见问题的解答

增透膜也称减反膜，即能够减少反射光，增加透射光的薄膜．笔者在此简单分析一下光学镜头中所用的增透膜．     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.     

一维CO2光学晶格中的光子带隙

本文研究了囚禁^85Rb原子的一维CO2光学晶格的光子带隙。由于大失谐CO2聚焦光束（λ=10．6μm）远离Rb原子的共振频率，原子与晶格光场的自恰作用可忽略，Rb原子被囚禁在周期为d=λ／2=5．3μm的周期性格点上，且单个格点上囚禁的原子数目可以达到10^3，整个晶格形成具有空间周期性调制的介电多层膜系。类似于光子晶体，其光学响应将在晶格频率与共振频率之间产生光子带隙。另一方面，     

ICP-AES测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量

采用电感耦合等离子体-原子发射光谱法同时测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量.以表征表面调整转化层厚度及钝化膜厚度,采用本方法准确度高、快速简便,经试验结果令人满意.     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。