制作高密度衍射光栅的光电式刻划控制的研究

高精度的光电式刻划控制系统是制作高密度母光栅的关键技术,以光栅干涉仪为控制核心,设计了光电式的光栅刻划控制系统,并对可能产生的加工误差进行了初步的分析;采用该控制系统的光栅刻划实践表明,所设计的光电式刻划控制系统已完全达到了高密度衍射光栅的亚微米栅距分度要求。     

Studies on Synthesis and properties of Mg-Al-nitrate Layered Ouble Hydroxides

A positive Mg-Al-nitrate layered double hydroxides(LDHs) has been synthesized using a non-steady coprecipitation method.The shape.size,chemical composition,electrical property and anion exchange property of the positve nanoparticle were studied by SEM,XRD,FTIR,chemical analysis,spectroanalysis and meaxsuring of electrophoretic mobilities.Preliminary results show the positive nanoparticle is a promising precursor of polymer/LDHs nanocomposite.     

Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

Viscosity Characteristic in Metallic Melts with Medium／Short-Range Order Structures

Viscosities and liquid structure of alloys Cu75Al25, Cu87Sn13 and Al-12.5%Si and pure metals Cu and Sn are investigated by using torsional oscillation viscometry and high temperature x-ray diffractometry. The viscosities of pure metals and eutectic alloy melts along with the short-range order structure are found to follow the Arrhenius law in a wide range of temperature above the liquidus. The breakpoints in Arrhenius plots emerge when the structures of alloy melts are transformed from the medium-range order structure to the short-range order structure. It has been found that the change of the viscosity of the metallic alloys is a characteristic of microstructure transformation in the related melts.     

位相连续变化型毫米波衍射天线的性能分析

报道了一种新型毫米波天线—衍射天线的测量结果．经分析讨论说明，这种天线具有良好的电性能．     

WKB近似下的Fourier衍射成象方法

对于介质目标微波衍射成象，本文引入了ＷＫＢ近似来模拟目标内部总场。基于这种近似，我们导出了Ｆｏｕｒｉｅｒ衍射公式，并采用了广义滤波逆传播方法由目标空间谱实现目标特性的重建。计算机模拟结果表明采用ＷＫＢ近似重建目标特性较Ｂｏｒｎ近似有明显改善。     

共振原子蒸气中激光脉冲的时空特性

在柱对称条件下，利用耦合的布洛赫－麦克斯韦方程，研究了激光脉冲在原子蒸气介质中的共振传播。考察了脉中在时空中的演化。数值计算结果表明激光脉冲在传播中，由于自感应透明与光波的衍射效应，表现出复杂的相干现象。     

边界衍射波理论公式的准确性数值分析

利用数值分析的方法分析了由边界波理论公式所得的圆形光阑衍射场的光强分布.通过对边界波理论公式所得的光强分布曲线,对几何照明区与阴影区的光强分布曲线与面衍射积分公式所得的光强分布曲线进行比较,分析了边界波理论公式对衍射场描述的准确性.     

二元光学分束器的设计

系统地阐述了几种二元光学分束器的基本设计理论，比较其算法以及衍射效率和再现误差，并提供了设计实例。     

半绝缘GaAs单晶化学配比的X射线双晶衍射Bond方法测量

本文利用Ｘ射线双晶衍射Ｂｏｎｄ方法，精确测量了各种条件下生长的半绝缘ＧａＡｓ的晶格参数．建立了过量Ａｓ在晶体中存在的间隙原子对模型，在理论上找到了影响半绝缘ＧａＡｓ晶格参数的根本原因．并建立了半绝缘ＧａＡｓ晶格参数与化学配比的关系，实现了化学配比的无损测量．这对于ＧａＡｓ单晶的制备和相关光电子器件的研究具有重要意义．