脲基苯乙炔4-′(对甲基苯基)-6-苯基-2,2′-二联吡啶铂(II)络合物的合成

本文通过异氰酸酰化反应合成了含有脲基的苯乙炔新型配体及以它作为辅助配体的4′-(对甲基苯基)-6-苯基-2,2′-二联吡啶铂(II)络合物,初步研究了铂(II)络合物的光物理性质,发现由于脲基的存在,当浓度大于3.32×10-5mol/L时铂(II)络合物能够发生分子间簇集.     

亲和标记-基质辅助激光解吸电离飞行时间质谱用于蛋白质相对定量方法的研究

将亲和标记技术和基质辅助激光解吸电离飞行时间串联质谱联用,建立了蛋白质相对定量方法,以牛血清白蛋白为实验对象,考察了该方法的准确度、重现性等指标;又以数种标准蛋白混合物为研究对象,考察了该方法的动态范围及相应的标准偏差,为实际生物样品中差异蛋白质分析奠定了基础。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

表面活性剂的基体辅助激光解吸电离/质谱分析表征

利用基体辅助激光解吸电离／质谱（MALDI－MS）技术对表面活性剂的分析表征进行了详细研究。以2，5－二羟基苯甲酸作为基体，考察MALDI样品制备方法如液滴干燥法、快速干燥法及三明治法对测定结果的影响，发现三明治方法更适合表面活性剂的分析。MALDI可以准确测定离子型表面活性剂的分子量，同时对于非离子型表面活性剂，还可以测定其平均聚合度和分子量的分布。     

微波辅助萃取/气相-质谱联用分析蔬菜中的有机磷农药

 建立了微波辅助萃取 (MAE) /气相 质谱联用法 (GC MS)测定蔬菜样品中二嗪磷、对硫磷、水胺硫磷的分析方法 ,研究了不同溶剂的萃取效率。选择二氯甲烷为萃取溶剂 ,采用二因素三水平的正交设计实验优化了萃取溶剂体积和萃取时间。方法的线性范围分别为二嗪磷和对硫磷 4ng/ g～ 40 0ng/ g、水胺硫磷 2 0ng/ g～ 40 0ng/ g,检出限分别为二嗪磷 0 2 9ng/g、对硫磷 1 70ng/g、水胺硫磷 2 30ng/g。测定 2 0 0 0ng/g和 50 0ng/g加标蔬菜样品 ,回收率为 72 2 %～ 1 0 2 0 % ,RSD为 1 5 %～ 1 1 0 %。。     

方正奥思在有机化学课件中的应用

计算机模拟教学在近几年已经愈来愈普遍 ,虽然计算机模拟过程并不能完全代替实验 ,也不能取代实验动手能力的训练 ,但计算机模拟有助于对基本概念的深入思考 ,对掌握基本概念和预计实验结果都有很大帮助。我们在研制有机化学和有机化学实验的课件过程中 ,对教学中的重点、难点进行了分析 ,针对理论教学中的反应历程和实验教学中的预习等难点问题采取了动画组来表达 ,取得了很好的效果。　　我们自 1 999年 5月起开始制作有机化学及实验ＣＡＩ课件 ,先后采用过Ａｕｔｈｏｒｗａｒｅ、ＶＢ、方正奥思并结合Ｃｈｅｍｏｆｆｉｃｅ、Ｃｏｏｌ3Ｄ…     

密闭微波辅助萃取当归粉中的阿魏酸

利用密闭微波样品制备系统(具有压力控制部件),对当归中的有效成分阿魏酸的萃取进行研究,比较了密闭微波萃取同超声波萃取和索氏萃取阿魏酸提取率的差异.结果表明:微波萃取与其他两种萃取方法相比,具有速度快和萃取率高的特点.并得到了阿魏酸提取的最佳条件:微波功率为400 W,萃取剂为90%的乙醇(体积分数),固-液比为1∶15,微波辐射为240 s,当归粒径为75μm.     

电路课程个性化教学辅助系统设计与应用

本文设计了一种集题目编辑、测试发布、在线测试和成绩分析等功能于一体的电路课程个性化教学辅助系统,学生在测试和练习时可以逐级获得解题提示,系统根据学生答题情况,自动分析学生学习信息,推送个性化练习题和测试试卷,促进学生个性化知识点的强化训练。教师可全面掌握学生个性化学习信息。经过探索和实践,该系统增强了学生对课程知识点的系统认识,有效促进了课程教学目标的达成。     

美欧高功率微波技术研究现状及发展趋势

当前,随着无人机集群等新型作战武器的逐步实战化,作为其反制手段的高功率微波等定向能武器受到了高度关注。美欧各军事大国均大力推进高功率微波技术研究及武器装备研发,部分高功率微波武器装备已经完成了概念演示验证,正逐步形成实战化装备。从高功率微波武器关键技术研究和武器装备发展2个方面,对高功率微波领域研究现状进行了梳理,重点介绍了脉冲功率驱动源技术、高功率微波产生技术和高功率微波辐射技术方向的研究进展,总结了典型高功率微波武器装备的性能特点,并分析了其发展趋势。