亮点介绍

银催化γ-氨基酮与炔烃[5+2]环加成反应合成Azepine衍生物Angew.Chem.Int.Ed.2013,52,10805~10858环加成反应是有机合成中一类重要的反应,具有良好的原子经济性和高的合成效率,被广泛应用于合成各类环状化合物.尽管环加成反应目前已取得很大的进展,但仍然存在一些不足,尤其在合成七元及七元以上环状化合物方面,所报道的方法不多并具有一定的局限性.其原因是在合成七元及七元以上环状化合物过程中,存在不利的熵/     

不同表面活性剂对铜互连阻挡层CMP一致性的影响北大核心CSCD

为实现铜互连阻挡层化学机械抛光的高平坦化,研究了阻挡层抛光液中表面活性剂的作用。在抛光液中分别添加非离子型表面活性剂异辛醇聚氧乙烯醚(JFC-E)、本课题组研发的Ⅱ型活性剂以及复合表面活性剂,研究其对阻挡层CMP中铜和正硅酸乙酯(TEOS)去除速率及一致性的影响。实验结果表明,表面活性剂不仅可以改善Cu和TEOS的去除速率一致性和晶圆全局一致性,还可以降低铜表面的粗糙度,通过复配两种不同的表面活性剂,可以提高Cu和TEOS的去除速率,使Cu和TEOS的剩余厚度片内非均匀性(WIWNU)分别降低至1.39%和1.38%,铜表面粗糙度从5.25 nm降至1.51 nm。基于实验结果,研究并提出了表面活性剂影响抛光液润湿性,从而改善片内非均匀性和铜表面质量的机理。     

硅表面活性剂增强的双网络耐高温多孔有机硅弹性体

采用聚醚改性三硅氧烷表面活性剂、 丙烯酸酯改性硅油和水3种组分制备了稳定的油包水(W/O)乳液, 经酸碱催化水解、 紫外引发聚合和干燥除水过程得到了双网络多孔有机硅弹性体. 扫描电子显微镜(SEM)分析结果表明, 所制备的有机硅弹性体具有丰富的孔径结构分布. 压缩强度测试结果表明, 弹性体具备良好的耐压缩性能, 45%压缩应变下循环50次, 仍具备良好的回弹性能. 有机硅弹性体具有优异的耐高温性能, 分解温度为370 ℃, 高于绝大多数多孔有机硅弹性体材料的分解温度. 丙烯酸酯改性硅油的制备工艺成熟、 廉价易得, 显著降低了多孔有机硅弹性体的生产成本, 为规模性开发有机硅材料提供了新的思路和应用前景.     

基于9,9'-螺二芴和萘的纯碳氢主体材料（英文）

利用磷光有机发光二极管的主客体掺杂结构有助于避免三重态激子浓度猝灭,从而提高器件性能.9,9’-螺二芴(SBF)及其衍生物具有独特的正交构型和刚性骨架,具有高玻璃化转变温度、高三线态能级和用作主体材料的潜力.通过引入萘环合成并表征了两种基于SBF的纯碳氢化合物(PHC)磷光发光器件的主体材料,命名为1,4-SBF-Nap和1,8-Oct-Nap.其中,1,8-Oct-Nap分子存在一个有趣的环化反应,形成八原子环结构而不是一般的SBF.以Ir(MDQ)₂(acac)为客体,成功制备了基于这两种主体的红光器件,最大外量子效率(EQE)分别为15.0%和13.7%,证明PHC主体材料在设计上的多样性.     

船舶水下减阻抗污涂层的研究综述

船舶由于在航行时受到各种阻力,消耗了大量能量,增加了航行成本。船舶水下阻力的来源可以大致分为船体阻力和生物质附加阻力。本文基于对阻力和生物质黏附形成过程的分析,介绍了水下减阻领域的进展突破,总结了具有减阻、抗污性质的涂层研究情况,从超疏水、超亲水减阻材料和自抛光防污涂料、低表面能抗黏附材料、防污剂等方面,对其中相关的科学问题和解决方法进行了综述。     

聚合物材料表面化学镀铜的前处理研究进展

聚合物材料表面金属化在通讯、电子、航空航天领域具有重要应用. 化学镀铜是聚合物材料表面金属化的主要技术之一. 聚合物材料表面的前处理直接影响化学镀铜层的结合力及镀层平整度. 本综述详细介绍非导电聚合物材料的种类、组成以及性能, 并概述其表面化学镀铜前处理的研究进展.     

硅片表面构建的纳米金SERS基底检测雾霾颗粒物中的芴

以金纳米颗粒为基础,在硅片表面进行自组装,制备了纳米颗粒均匀密集分布的表面增强拉曼（SERS）基底,经过修饰后,实现了对雾霾颗粒物中的多环芳烃类物质—芴的分析测定。以3-氨丙基三甲氧基硅烷为偶联剂将纳米金固定到羟基化处理的硅片表面,然后将硅片在纳米金胶体和2-吡咯烷酮溶液中交替浸泡,在硅片表面制备了纳米颗粒均匀密集分布SERS基底。选择1-硫代癸烷对SERS基底进行修饰,以芴为目标物进行SERS检测,结果显示,在芴的浓度为1×10^-6～5×10^-5mol/L范围内,信号强度与浓度间具有良好的线性关系。将该基底用于雾霾颗粒物中芴的检测,在采集了雾霾样品的玻璃纤维膜表面芴的添加浓度约为5×10^-7～5×10^-6mol/g时,可以实现80%以上的回收率。     

N-月桂酰基甲基丙氨酸钠三元复配体系的协同效应北大核心CSCD

将N‑月桂酰基甲基丙氨酸钠(SLMA)依次与月桂酰胺丙基甜菜碱(LAB)、烷基糖苷(APG1214)分别进行二元及三元复配,通过吊片法、稳态荧光探针法、动态光散射及稳态荧光猝灭法,对SLMA/LAB二元复配体系及SLMA/LAB/APG三元复配体系间的协同增效作用,以及溶液组成对其微极性、平均流体力学半径及胶束聚集数的影响进行了研究,并应用正规溶液理论计算二元及三元复配体系的相互作用参数。结果表明,SLMA/LAB二元复配体系及SLMA/LAB/APG三元复配体系均表现出全面增效的协同作用,其最佳物质的量比分别为n(SLMA)∶n(LAB)=3∶7,n(SLMA/LAB)∶n(APG1214)=3∶7,对应临界胶束浓度(CMC)分别为1.054×10^(−3)和1.595×10^(−4) mol/L,SLMA/LAB二元复配体系趋于形成分布集中的单一形态聚集体,且总体偏小;SLMA/LAB/APG三元复配体系的胶束大小比单一体系分布宽,且其胶束体积明显大于二元复配体系。两种复配体系所形成的胶束聚集数均小于单一体系,形成了更加紧密、稳定、较小的胶束结构。SLMA/LAB二元复配体系及SLMA/LAB/APG三元复配体系中表面活性剂分子间的相互作用力加快了稳定胶束的形成,胶束大小分布较宽,以球状及非球状胶束的形式存在,且复配体系形成了更加紧密的胶束结构。     

表面限域掺杂提升高比能正极材料稳定性

Lithium ion batteries (LIBs) have broad applications in a wide variety of a fields pertaining to energy storage devices. In line with the increasing demand in emerging areas such as long-range electric vehicles and smart grids, there is a continuous effort to achieve high energy by maximizing the reversible capacity of electrode materials, particularly cathode materials. However, in recent years, with the continuous enhancement of battery energy density, safety issues have increasingly attracted the attention of researchers, becoming a non-negligible factor in determining whether the electric vehicle industry has a foothold. The key issue in the development of battery systems with high specific energies is the intrinsic instability of the cathode, with the accompanying question of safety. The failure mechanism and stability of high-specific-capacity cathode materials for the next generation of LIBs, including nickel-rich cathodes, high-voltage spinel cathodes, and lithium-rich layered cathodes, have attracted extensive research attention. Systematic studies related to the intrinsic physical and chemical properties of different cathodes are crucial to elucidate the instability mechanisms of positive active materials. Factors that these studies must address include the stability under extended electrochemical cycles with respect to dissolution of metal ions in LiPF₆-based electrolytes due to HF corrosion of the electrode; cation mixing due to the similarity in radius between Li⁺ and Ni²⁺; oxygen evolution when the cathode is charged to a high voltage; the origin of cracks generated during repeated charge/discharge processes arising from the anisotropy of the cell parameters; and electrolyte decomposition when traces of water are present. Regulating the surface nanostructure and bulk crystal lattice of electrode materials is an effective way to meet the demand for cathode materials with high energy density and outstanding stability. Surface modification treatment of positive active materials can slow side reactions and the loss of active material, thereby extending the life of the cathode material and improving the safety of the battery. This review is targeted at the failure mechanisms related to the electrochemical cycle, and a synthetic strategy to ameliorate the properties of cathode surface locations, with the electrochemical performance optimized by accurate surface control. From the perspective of the main stability and safety issues of high-energy cathode materials during the electrochemical cycle, a detailed discussion is presented on the current understanding of the mechanism of performance failure. It is crucial to seek out favorable strategies in response to the failures. Considering the surface structure of the cathode in relation to the stability issue, a newly developed protocol, known as surface-localized doping, which can exist in different states to modify the surface properties of high-energy cathodes, is discussed as a means of ensuring significantly improved stability and safety. Finally, we envision the future challenges and possible research directions related to the stability control of next-generation high-energy cathode materials.