基于DDR CycleGAN的红外图像数据增强

提出了一种基于双鉴别器相对循环一致性生成对抗网络(DDR-CycleGAN)的红外图像数据生成方法。针对双鉴别器监督机制易出现的过度优化造成的性能下降问题,该方法在双鉴别器循环一致性生成对抗网络(DD-CycleGAN)中加入了相对概率的思想,采用鉴别器鉴别图像的相对真实概率替代绝对真实概率,使得生成图片更加接近真实图片。本文方法采用FLIR数据集进行训练和测试,实验结果表明本文方法相比DD-CycleGAN在可见光图像生成红外图像的图像质量上,峰值信噪比提高了3.91%,FID(Frechet Inception Distance score)降低了3.81%。     

聚类分割的交互式遥感热红外图像模糊增强北大核心CSCD

交互式遥感热红外图像在边缘区域的像素呈现较强交互干扰,缺少必要区分过程,导致增强后的交互式遥感热红外图像视觉效果差、抗噪性能差、增强效率低。提出基于聚类分割的交互式遥感热红外图像模糊增强方法,采用模糊C均值聚类算法,对交互式遥感热红外图像聚类分割处理,对边缘区域特殊及弱小交互目标分割,进一步区分交互区域的干扰,缩短后期增强所用的时间。采用中值滤波方法去除交互式遥感热红外图像中存在的噪声,结合Sobel算子和二阶微分算子的拉普拉斯算子对去噪后的交互式遥感热红外图像进行锐化处理,通过图像去噪和图像锐化实现交互式遥感热红外图像的模糊增强。仿真实验可知,所提方法进行交互式遥感热红外图像模糊增强所获取的图像清晰度较高、抗噪性能较佳、增强效率较高。     

复广义高斯分布多通道最大似然联合去噪去混响波束形成器

提出了一种基于复超高斯分布的多通道联合去噪去混响波束形成器。本文采用复超高斯模型对语音信号建模,在最大似然准则下首次推导出联合去噪去混响波束形成器的解析表达式,并证明了该式是现有多种联合去噪去混响波束形成器的一般化形式。同时通过理论推导证明本文所提算法性能优于传统多通道预测误差算法级联最小功率无失真波束形成器。仿真实验与实际实验结果均表明,本文提出的算法在多个客观指标上明显优于现有联合去噪去混响算法。      

石英管增强拉曼光纤探头粉末样品探测

拉曼光谱技术以其多组分同时探测、分子指纹特性等优点被广泛应用于多个领域,但其较低探测灵敏度严重限制了此技术的进一步发展。为了提高拉曼光谱技术粉末样品原位分析能力,提出了一种基于石英管增强的高灵敏度拉曼光纤探头。探头采取内镀金属空芯光纤用于光信号的传输,有效减小了背景信号对拉曼光谱的影响;探头底端采用石英管设计,增大采样体积和收集效率,提高了拉曼光谱的探测灵敏度。理论分析了石英管拉曼光谱技术可提高粉末样品的探测灵敏度,详细介绍了探头的设计和实现,进一步评估探头的性能,结果表明:相较于球透镜拉曼探头,拉曼信号强度（NaHCO₃）增强2.92倍。为模拟实际应用场景,采用光纤拉曼探头成功获得了容器中不同深度粉末样品（Na₂SO₄和NaHCO₃）的拉曼光谱信息。文中设计的石英管增强拉曼探头具有外径尺寸小（外径仅为2 mm）、灵敏度高等优点,可对深层次粉末样品进行探测,为现场粉末样品原位分析提供了一种新途径。     

普鲁士蓝薄膜的电积法制备及其化学组成

在金属和石墨基底电极上用恒电位沉积法制备出普鲁士蓝(PB)薄膜,研究了影响膜生长的多种因素;观察到PB膜的电化学活性。用红外光谱及电子能谱对膜的化学组成作了分析,结果表明,最初制备的膜为不溶性PB:Fe_4[Fe(CN)_6]_3,在含K~+的电解质溶液中经电化学反应后膜部分转变为可溶性PB:KFeFe(CN)_6,由此确定了PB膜的电化学反应式。     

Amperometric Determination of lndole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

Platinum nanowire （PtNW） can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm. The PtNW and multiwalled carbon nanotubes （CNT） are then dispersed into chitosan （CHIT） solution. The resulting PtNW-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of PtNW and CNT. By dropping the PtNW-CNT-CHIT film onto the glassy carbon （GO） electrode surface, and after evaporation an amperometric sensor for the determination of indole-3-acetic acid （IAA） was developed. The oxidation current of IAA increased significantly at the PtNW-CNT-CHIT film coated GC electrode, in contrast to that at the CNT-CHIT modified GC. The linear response of the sensor is from 50 ng/ml to 50 μg/ml with a detection limit of 25 ng/mL.     

自增强高性能聚合物的成型工艺同力学性能间相关性研究——1.超高分子量聚乙烯的应力诱导结晶理论和其自增强作用

本文发展了一种高分子量聚合物熔融体的应力诱导结晶结构形态模型,它是由微晶聚集体(以下简称微区)-高分子链组网和缠结网的网络结构组成。基于上述模型,把二种网中的单个链组作为独立的统计单元和形变单元,计算了二种网中单个链组的末端距分布函数,进一步计算了二种网和总网的形变自由能。在此基础上,讨论了诱导结晶结晶机理和自增强聚合物网络自由能的依赖性,并着重地研究了超拉伸高聚物的起始熔点拉伸比间的关系。用超高分子量聚乙烯膜和超取向高密度聚乙烯纤维的起始熔点和拉伸比的实验数据进行处理,得到理论予期的近似直线关系,初步验证了聚合物网应力诱导结晶理论。     

亮氨酸与异亮氨酸在金/银核-壳复合纳米粒子上的吸附状态

The Raman spectra and Surface enhanced Raman spectra (SERS) of leucine and isoleucine adsorbed on core-shell Au/Ag nanoparticles were obtained and assigned, and the different Raman peaks resulting from different vibrational models of the isomers忆groups were analysed. In Raman spectra, the leucine’s (ω(CH3)) is at 962, 945, 924 cm-1, (δas(CH3)) at 1408, 1454 cm-1; corresponding values for isoleucine are, 922 cm-1 and 1448, 1420, 1394 cm-1, respectwely. The difference in the peak positions of corresponding groups between leucine and isoleucine is more apparent in the SERS at acidic and basic conditions. The relationship between leucine and isoleucine’s concentration and SERS was interpreted preliminarily and the adsorption model on the core-shell Au/Ag nanoparticle surface was speculated.     

Zn-Fe-SiO2复合镀层的制备工艺及其耐蚀性研究

在酸性硫酸盐体系中电沉积制备了Zn-Fe-SiO2复合镀层,并研究了工艺因素对镀层SiO2含量的影响.随着电流密度由4.8A/dm2增加到6A/dm2时,镀层中SiO2的含量由0.21%上升到0.47%,但是当电流密度继续增加到7.2A/dm2时,SiO2含量反而下降到了0.18%.当镀液中SiO2浓度由20g/L增加到60g/L时,镀层中SiO2含量由0.40%上升到0.51%.当镀液pH值由2增加到4时,镀层中SiO2含量由0.22%上升到1.17%.采用5%NaCl溶液浸泡试验考察了Zn镀层、Zn-Fe合金镀层与Zn-Fe-SiO2复合镀层的耐蚀性,并研究了镀层中SiO2含量对镀层耐蚀性的影响.结果表明,Zn-Fe-SiO2复合镀层无需钝化处理,其耐蚀性优于Zn镀层及Zn-Fe合金镀层,并且镀层的耐蚀性随着镀层中SiO2含量增大而提高.     

硫代乙酰胺体系电沉积法制备CdS纳米膜

The film of surface active agents spread out on the surface of the electrolyte of Thioacetamide and cadmium chloride. CdS nanofilm was deposited at the interface of surface active agents and electrolyt by the method of electrodeposition. The optimal conditions on which the nanofilm was prepared of the least crystals and uniform particles could be attained via analytical results of L₁₆(4⁵) orthogonal experiments. The optimal conditions: castor oil/hexadecanoll 0.06 mL·cm^-2，CdCl₂/CH₃CSNH₂ 4 mmol·L^-1, cell voltage 5 V, electrodeposition temperature 15 ℃. The effects on the grain size of temperature, surface-active agent, electrodyte concentration, cell voltage and pH become smaller in the series. If the temperature was high, the movement of molecules of surface-active agent and electrodyte would be faster, thus the preparation of the film would be difficult. The grain size of thinfilm varied with the surface-active agents, however, when the amount of surface-active agents reached a certain value, the grain size would remain unchanged. The higher the electrodyte concentration, the larger the grain size of nanofilm. The surface forms were changed at the same time. If the pH of the electrodyte was higher or lower, nanofilm could not be prepared successfully, thus the pH range should be is 3～6. SEM image of the nanofilm shows the occurance of dendrite. The sucessful preparation of nanofilm is closely related to the nature of surface activre agent due to the nanofilm growth mechanism.