用于产生瞬态物种的脉冲放电及其光谱探测的分子束装置

建立了一套用于产生瞬变物种的脉冲高压放电分子束装置，以N2气为例，对高压脉冲放电过程和整个荧光采集系统的工作效率进行了研究，从N2气的振动光谱中得到其激发态的振动温度为2257K。     

Giant Magneto-Impedance of Co50Ni22Ga28 Alloy with High Chemical Ordering

The microstructure of CosoNi22Ga28 ribbon with the L10 structure is examined. The band-like morphology is observed. These bands with the width in a range of 40-200 nm appear along the transverse direction of the ribbon. The giant magnetoimpedance （GMI） effect in this alloy is measured. The results show that Co5oNi22Ga28 exhibits a sharp peak of the GAI effect. The maximum GAH ratio up to 360% is detected. The GMI effect measured versus temperature shows large jumps of the magnetoimpedance amplitude at the reversal martensitic transformation temperature 240℃ and Curie temperature 375℃C respectively. The jump ratios of the magnetoimpedance amplitude examined at these temperatures are about 5 and 10, respectively.     

High-Average-Power Nanosecond Quasi-Phase-Matched Single-Pass Optical Parametric Generator in Periodically Poled Lithium Niobate

A pulsed nanosecond optical parametric generator (OPG) in periodically poled lithium niobate (PPLN) crysal is presented. The pump laser is an acousto-optically Q-switched Nd:YVO4 laser with the maximum average power of 6.58 W. When the repetition rate is 50kHz and the pulse width of the pump source is 80ns, the maximum average total output power of the single-pass PPLN OPG is about 1.9 W, which includes 1.322 W of 1.536μm signal radiation. The length of the PPLN crystal is only 38.7mm (at room temperature) with a grating period of 28.93μm (at room temperature). The 1.502-1.536μm signal radiation and 3.652-3.465μm idler radiation are obtained by adjusting the PPLN crystal temperature from 155℃ to 250℃.     

脉冲管制冷机机理研究新进展

脉冲管制冷机是近年来空间微型机械式制冷机研究的前沿课题，作者通过精确的实验测量和分析，首次发现了双向进气型脉中管制冷机存在直流分量，该直流分量是脉冲管制冷机的一种损失，并指出多种旁能流程可以减小直汉损失，提高脉冲和制冷机的制冷性能。     

脉冲编码多路比例遥控用于小功率直流电动机的脉宽调速

比例遥迭控不仅能对被控对象的电源通断进行控制，而且能使被控对象在整个动作范围内的任意位置都能按操纵者的意愿随意动作并精确定位。文中介绍了一种将比例遥控与脉宽调速有机结合起来设计的一套多路比例遥控直流电动机脉宽调速电路。利用该电路可使几路小功率直流电动机的转速按操纵杆动作成比例变化的调整控制，且各路调整可同时进行了，互不干扰。     

基于IGBT的PWM大功率直流伺服驱动

本文介绍ＩＧＢＴ、ＥＸＢ８４１和ＬＥＭ模块在大功率ＰＷＭ直流伺服驱动系统中的应用和系统抗干扰设计。使用效果表明，基于ＩＧＢＴ的设计，可提高大功率直流伺服系统的可靠性和性能、减小体积、降低成本。     

直流电压变换器ICL7660的应用

A/D、D/A转换器、运算放大器、模拟开关等是很多电子设备及仪器必不可少的器件。它们工作时,除了需要正电源外,大多还需要负电源,而一些电子设备,有时限于条件(主要是出于功耗、体积、重量等方面的考虑),为这些芯片再提供一个负电压有困难。为解决这个矛盾,INTERSIL公司推出了一种型号为ICL7660的通用型集成负直流电压变换器,它的外围电路十分     

Fast Theoretical Simulation for Design of Helical Flux Compression Generators

A theoretical scheme is derived to achieve the numerical simulation of helical flux compression generator （HFCG） design, by which not only any physical approximation is not made, but also numerical simulation can be fast obtained. In particular, an analytic formula to calculate the inductance is deduced, which is extremely close to the experimental results. The physical process of relevant interesting physical quantity, such as inductance, enlarging current, and magnetic flux density, can be calculated to compare with the experimentally quantitative results.