基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

Zn(Thr)Ac2·2H2O固态配合物的制备及标准生成焓

在水-丙酮混合溶剂中合成了未见文献报导的Zn(Thr)Ac2@2H2O固态配合物,通过化学分析、元素分析、IR、XRD和TG-DTG等对其组成、结构及热稳定性进行了研究.用微量热法测定了配合物在298.15 K时在纯水中的溶解焓,计算了Zn(Thr)2+(aq,∞)和Zn(Thr)Ac2@2H2O(s)的标准摩尔生成焓分别为(955.24±5.70)kJ@mol-1和(-570.92±5.71)kJ@mol-1.     

Fabrication of Dendrimer－like PAMAM Based on Silica Nanoparticles

A G 4.0 dendrimer-like poly (amido amine) (PAMAM) based on silica nanoparticles was fabricated via a divergent approach.It was built from γ-aminopropyi silica nanoparfides (APSN) core via repetitive addition of acrylate (MA) and hexylenediamine (HDA). FT-IR and EA were used to monitor the progress of dendrimer during each step. The amino group content of the resulting product increased from 0.49 to 3.72 mmol/g after the 4th generation. In addition, the percentage of grafting increased with increasing generation and reached to 65.9% after 4th generation. It was found that the resulting silica nanoparticles could be dispersed in methanol with a mean hydrodynamic particle diameter of 152.7 nm although the silica nanoparticles had agglomerated during the storage period.     

强场物理与快点火靶的制备

采用本体聚合技术合成全氘代聚苯乙烯（DPS），所得聚合物分子量约250000，分散度约3，氘代率为98．7％。采用热诱导相分离技术制备全氘代聚苯乙烯泡沫。在室温溶解DPS于溶剂中，然后转入轴向冷却模具，进行单向冷却，直到溶剂完全冷冻，最后取出冷冻样置于冷冻干燥仪中进行冷冻干燥，待溶剂完全脱出后即得泡沫。通过对二恶烷／环己烷混合溶剂相图，以及PS一混合溶剂体系的相图的测定，     

EPT／BIIR橡胶密封材料制备及其性能

为了探索具备低水蒸气透过系数、低透气系数、低压缩永久变形以及良好耐老化性能的新型橡胶密封材料，鉴于影响并用胶性能的主要因素是共混相容性以及硫化速度，从实现并用胶优势互补角度出发，优选综合性能较好的三元乙丙橡胶（EPT）和溴化丁基橡胶（BIIR），开展了EPT／BIIR共混共硫化技术研究，并开展了DBPMH／HVA-2过氧化物硫化体系在EPT／BIIR并用胶中的应用研究。     

纳米Zr-V-O粉末的XRD及TG-DSC研究

利用机械合金化制备纳米Zr-V粉末，对制备过程的材料进行物相分析和热分析试验。初始粉末Zr（150μm）和V（150μm）元素粉末（纯度99．15％）按原子比1：2或1：1进行混合后在氩气气氛中放入SimoloyerCMol—2球磨仓中，按几种不同的试验条件进行球磨。同时在997K和1047K下热处理40min和1h，并对热处理前后的粉末进行了物相和TG-DSC实验分析。     

抽指加权宽带扇形叉指声表面波滤波器的等效电路分析

扇形换能器可以看成若干个沿孔径方向划分的均匀孔径换能器电端并联而成，根据梅森(Mason)等效电路模型以及由其延伸的混合场等效电路模型，推导出整个扇形换能器的导纳矩阵和频率响应，其中采用复阻抗模型考虑了叉指电极与自由表面的阻抗不连续的因素。本方法能够模拟指间反射、三次行程、指条寄生阻抗以及外围电路等对器件性能的影响；理论模拟与实验结果吻合。     

Preparation and Selectivity of Molecularly Imprinted Polymer Coating on the Micro Pore Membrane of Polytetrafluoroethylene

In order to obtain mechanically stable membrane for practical application, the imprinted polymer was synthesized in the pores of polyfluoromembrane, the binding and transport ability of the membrane were studied.     

TATB钝感炸药的小角X射线散射实验

在北京同步辐射装置上应用同步辐射X射线小角散射技术研究TATB样品微孔状况，分析了微孔结构参数的变化。采用不同制备工艺(机械研磨、化学合成、气流细化、全结晶、粉碎)和不同存放时间的TATB粉末样品共计7份。     

A Kind of Electrode Enhanced the Electrochemiluminescence

Electrochemiluminescence (ECL), like other chemiluminescence technique, offers high signal-to-noise ratio. Furthermore, it has the advantage over other chemiluminescence techniques of being initiated by a voltage potential. Thus, it provides a better-controlled luminescence. This technique has been used in measuring many kinds of organic and inorganic matters, and analyzing many kinds of antigen, antibody and hapten, such as carcinoembryonic antigen and alpha-fetoprotein, etc1-6. The ele…