应用键轨道连接矩阵方法预测烷烃折光率.

应用键轨道连接矩阵方法提取结构参数PX1CC和PX1CH， 并用于建立预测烷烃折光率的QSPR模型．该模型不仅预测精度较高(其误差仅为0.0048)，而且模型中采用的参数表达了直接与分子的折光能力相关的结构信息(即烷烃分子中电子被极化的能力)．此参数提取简单，既具备拓扑指数简单、易算，物理意义明确．     

最小Higgs模型在ILC上可能的味改变物理迹象

在最小Higgs(LH)模型中, 由于引进了类矢量顶夸克T, 对弱作用流产生了新的影响. CKM矩阵从3×3变为4×3, 在树图下出现味改变中性流(FCNC). 本文研究了在国际高能直线对撞机(ILC)上能否通过e⁺e^－→tc+tc和e⁺e^－→WWν_eν_e→(tc+tc) ν_eν_e过程探测到LH模型所预言的FCNC信号.     

A 2.048μm Tm,Ho:GdVO4 Laser Pumped Doubly Resonant Optical Parametric Oscillator Based on Periodically Poled Lithium LiNbO3

A multi-grating periodically poled LiNb03 （PPLN） doubly resonant optical parametric oscillator （DROPO） pumped by a 2-ttm laser is demonstrated experimentally. Employing acousto-optically Q-switched Tm,Ho：GdV04 laser with pump pulse of 25ns and repetition rate of lOkHz as pump sources firstly, the noncritically quasi- phase-matched （QPM） tunable mid-IR output in 3.87-4.43 μm is produced. Wavelength tuning is achieved with crystal temperature tuning from 50-180^o C. When the incident average pump power is 3 W at 2.048μm, the total OPO output power of 195mW at wavelength 3.88μm is obtained, corresponding to optical-to-optical conversion efficiency up to 6.5%.     

Existence and Stability of Compact-Like Discrete Breather in Discrete One-Dimensional Monatomic Chains

Compact-like discrete breathers in discrete one-dimensional monatomic chains are investigated by discussing a generalized discrete one-dimensional monatomic model. It is proven that compact-like discrete breathers exist not only in soft Ф^4 potential but also in hard Ф^4 potential and K4 chains. The measurements of compact-like discrete breathers＇ core in soft and hard Ф^4 potential are determined by coupling parameter K4, while the measurements of compact-like discrete breathers＇ core in K4 chains are not related to coupling parameter K4. The stabilities of compact-like discrete breathers correlate closely to coupling parameter K4 and the boundary condition of lattice.     

Measuring Grüneisen Parameter of Lead by High Pressure-Jump Method

Using the technology of pressure jump, variations of temperature associated with pressure from 2.4 GPa to 4.6 GPa are measured for lead. The Grfuneisen parameter is calculated from the thermodynamic relation γ =（Ks/T）（aT/aP）s, in which substitution of △T/△P for aT/aP at median pressure is strictly justified. The correction of temperature change is carried out by analysing the experimental data, which makes the process more approaching to an adiabatic condition. The calculated values of △T/ △ P and γ gradually decrease with the increasing pressure. The decrease trend is consistent with the previous work. The γ values in the range of 2-3 GPa are averagely higher than the results of Ramakrishnan et al., indicating the effect of temperature correction. The improved method is promising for measurements of Grfineisen parameter to higher pressure range.     

An optical scheme for conditional generation of W state and photon-added coherent state

We propose a simple scheme to generate an arbitrary photon-added coherent state of a travelling optical field by combining an array of degenerate parametric amplifiers and corresponding single-photon detectors. Particularly, when the single-photon-added coherent state is observed by developing the novel technique of Zavatta et al （2004 Science 306 660）, we can simultar/eously obtain the generalized N-qubit W state.     

能量条件简介

 ……………… 上面介绍的这几种能量条件有一个共同的特点，那就是它们给出的是每个时空点上能量动量张量所满足的条件，这样的能量条件被称为逐点能量条件。除逐点能量条件外，人们还常常使用另外一类能量条件，称为平均能量条件，它们给出的是能量动量张量沿特定的时空曲线(通常是类时或类光曲线)所满足的平均意义上的条件。平均能量条件比相应的逐点能量条件弱，因为它们允许逐点能量条件在局部意义上被破坏--只要这种破坏能被所涉及的曲线上其它区段的贡献所弥补即可。     

射频CO2激光用于轧辊毛化的实验研究

分析了轧辊材料在温度发生变化时对激光吸收系数的影响和毛化加工时各种工艺参数对毛化点的影响.针对Diamond K-50射频激励CO2激光器对轧辊毛化的实验,分析了激光脉冲宽度、重复频率以及毛化扫描速度等参数对毛化点的大小和椭圆度的影响,其中激光脉冲宽度与毛化点大小成线性关系,在脉宽为50～400μs时,毛化点椭圆短轴直径可达90～260μm,满足所需要的毛化加工要求.     

AA6063-T6铝合金激光焊接实验研究

采用3500 W Slab CO2激光器，对厚度为5 mm的AA6063-T6铝合金板材进行了激光填丝对接焊接实验研究。测定了AA6063铝合金激光焊接的功率阈值，探讨了激光填丝焊接工艺参数对焊缝成型的影响，并对不同填充焊丝焊接接头的强度及拉伸断口形貌进行了分析。研究结果表明，在合适的工艺参数下，可以获得表面光洁、正反面焊缝成型良好的对接接头;焊态下，单面焊接不填充焊丝的接头强度为180.7 MPa;单面焊接填充AlSi12,AlMg4.5MnZr焊丝的接头强度最低为190 MPa，且两种填充焊丝接头的拉伸强度无明显差异;双面焊接填充AlMg4.5MnZr焊丝的接头强度达到200.7 MPa，约为母材的90%。对于单面焊接接头，由于填充材料难以进入焊缝内部及根部存在气孔加剧了拉伸强度较低的程度。     

粗粒度可重构结构的性能估计方法

在设计初期,估计粗粒度可重构结构的性能,对粗粒度可重构结构设计具有指导意义.在考虑局部数据存储器结构以及局部数据存储器与可重构阵列的接口结构的情况下,建立了粗粒度可重构结构的参数模型,使用改进的螺旋形绑定策略将应用算法DFG(Data Flow Graph)中的算子绑定到可重构阵列的处理单元上,提出了一种粗粒度可重构结构的性能估计方法.应用实例表明,在设计初期,该方法能得到周期精确的估计结果,有效地指导粗粒度可重构结构的设计.