沉积铁钝化膜的傅立叶变换表面增强拉曼光谱

利用恒电流沉积技术、傅立叶变换表面增强拉曼散射技术现场研究了0 1mol/LNaOH溶液中铁金属电极在不同电位下的表面氧化物的组成。结果表明,在电极预钝化区,表面首先生成的Fe(OH)2可由拉曼谱图中出现的550cm-1表征,证实了以往的研究结果。进入钝化区,表面二价氧化物逐步转化为高价氧化物Fe3O4及α 、δ 和γ FeOOH。在电位回扫的过程中,各氧化产物的还原以及铁表面SERS活性的逐渐消失导致谱峰强度降低。     

甚高频等离子体增强化学气相沉积法沉积μc-Si∶H薄膜中氧污染的初步研究

对不同的本底真空条件下,采用甚高频等离子体增强化学气相沉积技术沉积的氢化微晶硅（μc_Si∶H）薄膜中的氧污染问题进行了比较研究.对不同氧污染条件下制备的薄膜样品的x射线光电子能谱与傅里叶变换红外吸收光谱测量结果表明：μc_Si∶H薄膜中,氧以Si—O，O—O和O—H三种不同的键合模式存在,不同的键合模式源自不同的物理机理.μc_Si∶H薄膜的Raman光谱、电导率与激活能的测量结果进一步显示：沉积过程中氧污染程度的不同,对μc_Si∶H薄膜的结构特性与电学特性产生显著影响；而不同氧污染对μc_Si∶H薄膜电学特性的影响不同于氢化非晶硅（a_Si:H）薄膜. 关键词： 氢化微晶硅薄膜 甚高频等离子体增强化学气相沉积 氧污染     

大规模制备定向排列的碳纳米管阵列

采用一种无模板的化学气相沉积法，在石英衬底上制备了大面积，高定向性、自支撑的碳纳米管阵列。二甲苯和二茂铁分别作为碳源和催化剂，连续进给到反应装置中，在一定温度条件下，碳纳米管自组织生成垂直于衬底方向的定向阵列。这种方法可以获得很高的生长速度，其最大长度可以达到几个毫米。拉曼光谱和高分辨透射电镜检测显示这种方法制备的碳纳米管具有较高的纯度和石墨化程度。     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

PECVD法制备低介电常数含氟碳膜研究

采用PECVD法制备了低介电常数薄膜a-C：F，研究了薄膜沉积速率与温度及射频功率的关系，测量了不同沉积条件下薄膜的介电常数，并用FTIR分析了薄膜的化学结构及成分，发现薄膜沉积速率与沉积条件密切相关，其介电性与其化学结构以及沉积条件密切相关。     

应用扫描电子显微镜对电沉积Cu／NiCu多层膜结构的表征

应用扫描电子显微镜对电沉积Ｃｕ／ＮｉＣｕ多层膜结构的表征张伟１薛群基１王友良２赵家政１（１．中国科学院兰州化学物理研究所固体润滑开放室，兰州７３００００２．兰州大学材料系）近年来，由两种不同金属交替构成的多层金属复合膜的研究引起了人们极大的关注。发现...     

Low-Temperature Growth of Polycrystalline silicon Films by SiCl4／H2 rf Plasma Enhanced Chemical Vapour Deposition

Polycrystalline silicon film was directly fabricated at 200℃ by the conventional plasma enhanced chemical vapour deposition method from SiCl4 with H2 dilution. The crystallization depends strongly on the deposition power.The maximum crystMlinity and the crystalline grain size are over 80% and 200—50Onm, respectively. The results of energy dispersive spectroscopy and infrared spectroscopy measurements demonstrate that the film is mostly composed of silicon, without impurities such as Cl, N, C and bonded H. It is suggested that the crystallization at such a low temperature originates from the effects of chlorine, i.e., in-situ chemical, etching, in-situ chemical cleaning, and the detachment of bonded H.     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

长脉冲激光沉积原位生成YBaCuO超导膜

用长脉冲激光(脉冲宽度150μs,波长1.06μm)辐照高温烧结的YBa_2Cu_3O_(7-x)靶,在6Pa的氧气压强下,巳在(100)YSZ单晶衬底上原位生成YBa_2Cu_(?)O_(7-x)超导膜。衬底置于750℃的加热器上,衬底与靶之间的距离5cm,用该法制得的薄膜光亮坚实,正常态呈金属性,零电阻温度为84.7K。用XRD和SEM对薄膜进行了分析研究。