Me4Bzo2[14]六烯(2-)N4金属配合物的结构和反应性研究——Ⅱ. ML和MLXx型配合物的电子吸收光谱研究

本文研究了ML及MLX_x型配合物电子吸收光谱的电荷转移谱带,求得了所用N₄大环配体的光学电负性值,证实金属的形式D_q值与成键有关.对阐明有关化合物的结构提供了新的证据.     

系数倍率法同时测定铁钴镍三组分的研究

本文运用了在乙酸缓冲液中铁，钴，镍与亚硝基红盐（ＮＲＳ）生成有色配合物光吸收的差异，分别采用系数倍率法消除相互之间的干扰取得了满意的结果。     

镍电极开路电位测定微量硼氢根离子

实验采用循环伏安法，用镍电极代替铂铑等贵金属电极测定了碱性体系中不同硼氢根离子浓度下的开路电位，得出了研究电极的开路电位（-0．355～-0．280vs.SCE／V）与微量硼氢根离子浓度的对应关系，并用于监测电解偏硼酸钠制备硼氢化钠体系中微量硼氢根离子，同时计算了该方法的误差。结果表明，测量结果的相对标准偏差为2．2％；回收率为98．4％。该法简单、快速，可测定10^-5～10^-3mol／L范围的硼氢根离子浓度。     

镍基气凝胶催化CH4-CO2重整制取合成气反应的研究 Ⅲ.影响催化剂积碳性能因素的探讨

考察了823K焙烧的干凝胶xNCA550、气凝胶aNCA550及浸渍型催化剂iNCA550在923K、1073K、1173K反应温度下的积碳行为，对催化剂表面碳的活性及类型进行了分析，并探讨了影响催化剂积碳的因素。实验结果表明，随反应温度的提高，催化剂的积碳能力减弱，尤以气凝胶催化剂aNCA550明显。催化剂的积碳主要发生在反应的初期，反应温度越高，到达积碳量相对稳定期所需要的时间越短；随着反应时间的延续，催化剂积碳量缓慢增长，并且表面碳的活性降低。催化剂的酸性和镍晶粒大小是影响其积碳性能的主要内在因素，而它们对积碳的影响程度受反应温度的影响，反应温度越高，催化剂表达酸性中心利于积碳的作用越小，小晶粒镍抑制催化剂积碳的能力越强。     

铁氰化镍/银复合无机膜修饰电极对肼的催化氧化作用

在含有Ag+、Ni2+的胶体混合溶液中,多次循环扫描在电极表面形成复合无机膜(Ag/NiCHF),此复合膜修饰电极对肼有显著的催化氧化作用。N2H4的浓度在5.0×10-6～6.0×10-3mol/L范围内与电流呈线性关系,检出限达到1.0×10-6mol/L。该电极已成功的用于水样中肼的测定。     

双功能型嵌入镍纳米颗粒的碳棱柱状微米棒电极用于电化学甲醇氧化助力的节能产氢

With the rapid development of human society, clean energy forms are imperative to sustain the normal operations of various mechanical and electrical facilities under a cozy environment. Hydrogen is considered among the most promising clean energy sources for the future. Recently, electrochemical water splitting has been considered as one of the most efficient approaches to harvest hydrogen energy, which generates only non-pollutant water on combustion. However, the sluggish anodic oxygen evolution reaction significantly restricts the efficiency of water splitting and requires a relatively high cell voltage to drive the electrolysis. Therefore, seeking a thermodynamically favorable anodic reaction to replace the sluggish oxygen evolution reaction by utilizing highly active bifunctional electrocatalysts for the anodic reaction and hydrogen evolution are crucial for achieving energy-efficient hydrogen production for industrial applications. Nevertheless, it is known that the oxygen evolution reaction can be replaced with other useful and thermodynamically favorable reactions to reduce the electrolysis voltage for realizing energy-efficient hydrogen production. Therefore, in this study, we present a bifunctional nickel nanoparticle-embedded carbon (Ni@C) prism-like microrod electrocatalyst synthesized via a two-step method involving the synthesis of a precursor metal-organic framework-74 and subsequent carbonization treatment for methanol oxidation and hydrogen evolution. The interfacial structure consisting of a nickel and carbon skeleton was realized via in situ carbonization. However, the dispersed nickel nanoparticles do not easily aggregate owing to the partition by the surrounding carbon as it would sufficiently expose the active Ni sites to the electrolytes, ensuring fast charge transfer between the catalyst and electrolytes by accelerating the electrochemical kinetics. In the anodic methanol oxidation, the products were detected as carbon dioxide and formate with faradaic efficiencies of 36.2% and 62.5%, respectively, at an applied potential of 1.55 V. Meanwhile, the Ni@C microrod catalyst demonstrated high activity and durability (2.7% current decay after 12 h of continuous operation) toward methanol oxidation, which demonstrates that methanol oxidation precedes oxidation under voltage forces. Notably, the bifunctional catalyst not only exhibits excellent performance toward methanol oxidation but also yields a low overpotential of 155 mV to drive 10 mA∙cm⁻² toward hydrogen evolution in 1.0 mol∙L⁻¹ KOH aqueous solution with 0.5 mol∙L⁻¹ methanol at room temperature, which guarantees the hydrogen production efficiency. More importantly, the constructed two-electrode electrolyzer produced a current density of 10 mA∙cm⁻² at a low cell voltage of 1.6 V, which decreased by 240 mV after replacing the oxygen evolution reaction with methanol oxidation.     

A Novel Catalyst for Liquid Phase Hydrogenation of m-Dinitrobenzene to m-Phenylenediamine

A novel lanthana-promoted nickel catalyst supported on silica for the liquid phase hydrogenation of m-dinitrobenzene to m-phenylenediamine was prepared by an incipient wetness sequential impregnation method. It was found that Ni-La/SiO2 catalyst exhibited high activity and stability for m-dinitrobenzene hydrogenation. Over this catalyst, the conversion of m-dinitrobenzene and the yield of m-phenylenediamine were up to 97.1% and 93.5%, respectively,at 373 K and 2.6 MPa hydrogen pressure after reaction for 1 h.     

异双桥二维镍(Ⅱ)配位聚合物 ∞2[Ni(μ-4，4′-bpy)2/2(μ-L)4/2](HL=2-indolyl-formic acid)的水热合成和晶体结构

The allo-bisbridge 2D coordination polymer _∞²[Ni(μ-4，4′-bpy)_2/2(μ-L)_4/2](HL=2-indolyl-formic acid) has been obtained by using hydrothermal synthesis, and the results of X-ray single crystal diffraction analysis show that the compound crystallizes in monoclinic system, space group C2/c (No.15) with a=2.300 2(5) nm, b=1.129 1(2) nm, c=0.974 0(2) nm, β=109.85(3)°, V=2.379 2(8) nm³, D_c=1.494 g·cm^-3, Z=4, F(000)=1 104, μ=0.860 mm^-1, R=0.032 2, wR=0.088 8. The crystal structure consists of the [Ni(μ-4,4′-bpy)_2/2(μ-L)_4/2] complex molecules, in which the Ni atom is octahedrally coordinated by two N atoms from two different 4,4′-bpy molecule ligands and four O atoms from four different L- anion ligands. TG analysis indicate that title coordination polymer possesses relatively high thermal stability. CCDC: 252833.     

L-波段掺铒光纤放大器的优化设计

针对L-band的泵浦效率不高的缺点改进了光链路：在EDFA的前端加入一个光纤环行镜用来反射铒纤产生的后向放大自发发射谱（ASE），通过实验和数值分析发现，在较大的波长范围内光纤环形镜（FLM）可以反射后向ASE的能量，平均增益在12．5dB以上，提高了泵浦效率，证明这一结构对提高L-bandEDFA的转换效率是简单有效的。     

Study of NiSi/Si Interface by Cross-Section Transmission Electron Microscopy

采用不同硅化工艺制备了NiSi薄膜并用剖面透射电镜(XTEM)对样品的NiSi/Si界面进行了研究.在未掺杂和掺杂(包括As和B)的硅衬底上通过物理溅射淀积Ni薄膜,经快速热处理过程(RTP)完成硅化反应.X射线衍射和喇曼散射谱分析表明在各种样品中都形成了NiSi.还研究了硅衬底掺杂和退火过程对NiSi/Si界面的影响.研究表明:使用一步RTP形成NiSi的硅化工艺,在未掺杂和掺As的硅衬底上,NiSi/Si界面较粗糙;而使用两步RTP形成NiSi所对应的NiSi/Si界面要比一步RTP的平坦得多.高分辨率XTEM分析表明,在所有样品中都形成了沿衬底硅〈111〉方向的轴延-NiSi薄膜中的一些特定晶面与衬底硅中的(111)面对准生长.同时讨论了轴延中的晶面失配问题.