纳米级精度分光路双频干涉度量系统的设计

为完成快速、精确的外观轮廓度量,设计了一种新型纳米级精度分光路双频干涉度量系统。系统由低频差双频激光干涉度量模块和微探头及二维工作台两部分组成。微探针以轻敲式接近样品至几十纳米时,受原子力作用发生偏转,利用双频干涉模块度量其纵向偏转量,并对样品进行梳状式度量得到外观形貌。根据双频激光的实际光源,对原有双频干涉度量理论进行了改进提高。进行了系统组建和实验验证。结果表明:系统具有纳米级精度,可用于超精样品外观轮廓度量。     

Second-order random wave solutions for interfacial internal waves in N-layer density-stratified fluid

This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The density interface displacements and the velocity potentials were solved to the second-order by an expansion approach used by Longuet-Higgins （1963） and Dean （1979） in the study of random surface waves and by Song （2004） in the study of second- order random wave solutions for internal waves in a two-layer fluid. The obtained results indicate that the first-order solutions are a linear superposition of many wave components with different amplitudes, wave numbers and frequencies, and that the amplitudes of first-order wave components with the same wave numbers and frequencies between the adjacent density interfaces are modulated by each other. They also show that the second-order solutions consist of two parts： the first one is the first-order solutions, and the second one is the solutions of the second-order asymptotic equations, which describe the second-order nonlinear modification and the second-order wave-wave interactions not only among the wave components on same density interfaces but also among the wave components between the adjacent density interfaces. Both the first-order and second-order solutions depend on the density and depth of each layer. It is also deduced that the results of the present work include those derived by Song （2004） for second-order random wave solutions for internal waves in a two-layer fluid as a particular case.     

Si基膜片型气敏传感器微结构单元的热学性能

微结构气敏传感器由于其微型化、低功耗、易阵列化和易批量生产等优点而受到国内外研究者的广泛关注。利用微机电系统（MEMS）加工技术，制备Si基膜片型微结构单元，并分析其热学性能。这种单元工作区温度为-300℃时，加热功率约75mW；并且膜片工作区的热质量很小，温度可以于毫秒量级的时间内，在室温和450℃之间调制。利用这种微结构单元，可以在温度调制方式下，研究气敏薄膜的电学特性和敏感机理。     

基于充放电原理实现的微电容测量电路

具有抗分布电容以及简单实用等特性的充放电电路是目前微电容测量中广泛采用的一种测量电路。本文对基于充放电原理的微电容测量电路进行了深入研究，并介绍一种基于充放电原理的实用电路。     

超临界流体触媒作用下石墨-金刚石转变

 研究了超临界流体CO₂在石墨-金刚石转变中的触媒作用。实验中，采用Ag₂O作为流体触媒的先驱材料，在7.7 GPa压力下，Ag₂O在1 200 ℃分解成Ag和O₂，O₂与石墨套管在高温高压下反应形成CO₂超临界流体。研究结果表明，在7.7 GPa和1 500 ℃以上温度条件下，石墨在CO₂流体触媒的作用下可转变为金刚石晶体，在1 500～1 700 ℃温度范围内合成出的金刚石具有完好的八面体形貌，与天然金刚石的生长特征非常相似。     

Micro-Photoluminescence Investigation of Single Quantum Dot and its Molecule of CdSe/ZnSe

The single and a few coupled quantum dots are important for future quantum information sciences and their investigation is also a big challenge in physics. We investigate here the electronic and exciton states and their interaction with each other via micro photoluminescence. The luminescence for single and a few dots as well as a dot molecule of CdSe/ZnSe are measured with very high resolution, under liquid He temperature and magnetic fields and with different polarization of excitation laser. The observed sharp spectral lines are attributed to the atomlike transitions of exciton, trion, biexciton… in the investigated single QD or QD molecule. Band filling, Zeeman splitting, spin transition and their relaxation are observed and investigated＇from the spectra and compared with those of same material in different dimensions, and compared with the primary calculation as well. In addition, quite a few new phenomena, which can not be understood based on our present model and knowledge, are also observed; and some very interesting problems are left for further investigation.     

完全非线性偏微分方程解的Gevrey微局部正则性

本文中，我们首先简要回顾了Gevrey类中的仿微分运算，然后考察了相关的完全非线性偏微分方程的象征的一些性质。作为应用，我们得到解在椭圆点附近的Gevrey微局部正则性。     

一类潜热型功能液固两相流体的定压比热研究

应用两相流与热物理理论，严格推导出一类潜热型功能液固两相流体的定压比热计算公式．     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面,用光杠杆技术检测温度在20-40 ℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示:在升温过程中,微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形,这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中,微悬臂梁发生了反方向的弯曲变形,这对应着PNIPAM分子从塌缩小球构象向无规线团构象的构象转变.整个温度变化过程中构象转变是连续进行的,而在低临界溶解温度(约32 ℃)附近转变幅度较大,这与自由水溶液中PNIPAM分子的无规线团-塌缩小球构象转变相对应.实验结果还显示:由于PNIPAM分子在塌缩过程中氢键的形成和链段间可能的缠结效应,整个温度循环过程中微悬臂梁的变形是不可逆的且有明显的迟滞效应.     

光纤拉丝生产中影响POD的因素

讨论了在光纤拉丝生产过程中，影响内涂层直径（POD）的几个重要因素。