N8H8链状异构体结构与稳定性的理论研究

采用密度泛函理论(DFT), 在B3LYP/6-311＋＋G(d,p)基组上计算得到了21种N₈H₈链状异构体, 并研究了这些异构体间可能的互变异构情况. 为了得到更为精确的能量信息, 计算了QCISD(T)/6-311G(d,p)基组水平上各物质的能量. 所得的21种异构体分为4类(4种类型链状化合物): A为直链, B有一个支链, C有2个支链, D有3个支链; D类只有一种, A类稳定构型2种, B类稳定构型12种, C类稳定构型6种; 相对稳定的分别为: B2-1构型, B2-3构型和C23-2构型. 我们研究发现N₈H₈链状异构体中含有明显N＝N双键特征有利于化合物稳定性的提高.     

水杨酸-2’-乙基己基酯在胶束中的增溶位点

考察了阳离子、非离子和阴离子表面活性剂存在下水杨酸-2’-乙基己基酯(EHS)的吸收光谱和激发态分子内质子转移(ESIPT)荧光光谱. 结果表明, EHS可增溶在胶束中, 2’-乙基己基碳链朝向胶束内核, 而水杨酸基朝向胶束-水界面; 胶束环境有利于EHS分子对紫外光的吸收和分子内氢键的形成, 从而使ESIPT 荧光显著增强, 激发态分子以发射可见光和非辐射去活化方式衰减; 并根据EHS和表面活性剂分子的结构和大小, 解释了EHS分子在胶束中的结合位点, 荧光猝灭和酯水解的光谱测量进一步为此结合位点提供了佐证.     

Catalytic Enantioselective Reduction of Prochiral Ketones with Chiral Ferrocenyl Amino Alcohols

The asymmetric reduction of prochiral ketones was catalyzed by a class of recoverable and highly stable chiral ferrocenyl amino alcohols derived from natural amino acids to yield optically active secondary alcohols in high chemical yields and moderate to good enantiomeric excesses.     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

二氯亚甲基锗烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet dichloromethylene germylene and ethylene has been investigated with B3LYP/6-31G＊ method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD（T）//B3LYP/6-31G＊ method. On the basis of the surface energy profile obtained with CCSD（T）// B3LYP/6-31G＊ method for the cycloaddition reaction between singlet dichloromethylene germylene and ethylene, it can be predicted that the dominant reaction pathway is that an intermediate INT1 is firstly formed between the two reactants through a barrier-free exothermic reaction of 61.7 kJ/mol, and the intermediate INT1 then isomerizes to an active four-membered ring product P2.1 via a transition state TS2, an intermediate INT2 and a transition state TS2.1, in which energy barriers are 57.7 and 42.2 kJ/mol, respectively.     

INVESTIGATION OF THE ATRP OF n-BUTYL METHACRYLATE USING THE Cu（I）／N,N,N＇ N＂ N＂-PENTAMETHYLDIETHYLENETRIAMINE CATALYST SYSTEM

The polymerization of n-butyl methacrylate was investigated using the Atom Transfer Radical Polymerization technique with CuBr and CuCl/N,N,N‘,N“,N“-pentamethyldiethylenetriamine catalytic systems. Various combinations of catalyst systems and initiators were utilized in order to optimize the polymerization conditions and to obtain well-defined polymers (i.e. controlled molecular weights and low polydispersities). It has been found that the optimal initiator for this system is a chlorine-based initiator, when the catalyst used is a Cu(I) salt in conjunction with the N,N,N‘,N“,N“-pentamethyldiethylenetriamine ligand. Bromine-based initiators tend to result in large amounts of initial termination, leading to polymers with less than ideal chain end functionality, even if CuCI is used as the Cu(I) species to invoke the halogen exchange. Additionally, the effects of the polymerization temperature, copper(I) species and the initiator structure were determined.     

基于小波变换模极大法的聚乙烯催化剂表面分形分析

运用分形和小波相结合的方法研究负载型聚乙烯催化剂(简称催化剂)表面形态. 采用小波变换模极大(WTMM)法提取了催化剂表面多尺度边缘(细节)图像, 用分形和多重分形方法研究了各尺度边缘图像中边缘点的分布情况, 并用基于小波变换模极大的多重分形谱法讨论了催化剂边缘点奇异强度的分布状况. 研究结果表明, 催化剂的较小尺度边缘图像的分维和多重分形谱可以与催化剂的表面形态和活性进行较好的关联; 高活性催化剂的基于WTMM的多重分形谱的奇异强度跨度更宽, 拥有较多具有较高奇异强度的奇异点. 基于小波和分形对催化剂表面形态的研究, 发挥了小波和分形各自的优点, 为研究物体表面形态提供了思路.     

四元Mg0.9Ti0.1Ni0.9X0.1(X=Mn,Zn,Co,Fe)系列合金的制备及性能研究

用机械合金化法合成了Mg0.9Ti0.1Ni0.9X0.1(X=Mn, Zn, Co, Fe)系列合金. X射线衍射(XRD)结构分析表明, 用X部分替代Ni后, 促进了Mg0.9Ti0.1Ni合金的非晶化过程. 用Co和Fe部分替代Ni提高了合金的放电容量, 但却降低了合金的循环稳定性. 用Zn和Mn部分替代Ni提高了合金电极的循环寿命, 尤其是Mg0.9Ti0.1Ni0.9Zn0.1合金电极经10个充放电循环后, 其放电容量仍可达到313.8 mA·h/g. 对添加Co后的合金进行p-c-T测试发现, Mg0.9Ti0.1Ni0.9Co0.1合金的吸放氢容量明显比Mg0.9Ti0.1Ni合金高, 这与电化学所测到的结果一致.     

杂多阴离子的有机金属化学(Ⅲ)——缺位Keggin阴离子PWO9-34的酯基锡杂多配合物的合成及性质

利用酯基锡与缺位Keggin结构杂多阴离子PW9O9-34反应,合成了6种新的杂多阴离子--有机金属配合物M9[(R'OOCCHR"CH2SnOH2)3(PW9O34)2]·xH2O(M=(CH3)4N+,K+;R'=CH3-,CH3CH2-;R"=H,CH3-),通过元素分析、IR光谱、紫外电子光谱、1H NMR、31P NMP、183w NMR和TGA-DSC热分析等测试手段对标题配合物进行了表征和性质研究,确定该系列配合物为A-β-PW9 型夹心配合物结构.     

二安替比林基—3,4—二羟基苯基甲烷与Cr（Ⅵ）显色反应的研究及应用

研究了二安替比林基-3,4-二羟基苯基甲烷与Cr(Ⅵ)的显色反应。在磷酸介质中,在Mn(Ⅱ)和吐温-80存在下,Cr(Ⅵ)与二安替比林基-3,4-二羟基苯基甲烷反应生成一种橙黄色化合物,其最大吸收波长为480nm,表观摩尔吸光系数为1.04×10~5L·mol~(-1)·cm~(-1),Cr(Ⅵ)量在0.3～11μg/25ml范围内符合比耳定律。文中初步探讨了反应的机理,并将此法应用于钢铁样品中微量铬的测定,结果满意。