高应变率下U-Nb合金的断裂组织特征

利用内部爆炸加载方法对U-Nb合金进行爆破试验，对爆破试验产生的破片进行回收，并对U-Nb合金破片进行一些微观检测分析，从而初步研究在爆炸加载下U-Nb合金的微观断裂机制。     

Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

使用METGLAS非晶态合金2174A设计高频磁性放大输出调节器

使用ＭＥＴＧＬＡＳ非晶态合金２１７４Ａ设计高频磁性放大输出调节器最近几年，磁性放大输出调节器被普遍地用于转换供电的多输出调节。这些调节器能够极其精确地调节每一个独立的输出，效率高，简单，而且非常可靠。磁放大器尤其适用于输出为一至几十安培的电流，但也用...     

Al—Si—Mn—Fe合金中相组成的电子衍射鉴定

本文利用选区电子衍射,并结合X射线衍射对六种不同成份的急冷合金及其退火后的相组成进行了鉴定,得到了它们的相组成。     

一种新的触头材料—Cu—Mo系合金

本文介绍了近年来国外研制Ｃｕ－Ｎｏ系触头材料的情况。详细地介绍了该种材料的制造方法和电性能。     

Total Dose Radiation Tolerance of Phase Change Memory Cell with GeSbTe Alloy

Phase change memory （PCM） cell array is fabricated by a standard complementary metal-oxide-semiconductor process and the subsequent special fabrication technique. A chalcogenide Ge2Sb2Te5 film in thickness 50hm deposited by rf magnetron sputtering is used as storage medium for the PCM cell. Large snap-back effect is observed in current-voltage characteristics, indicating the phase transition from an amorphous state （higher resistance state） to the crystalline state （lower resistance state）. The resistance of amorphous state is two orders of magnitude larger than that of the crystalline state from the resistance measurement, and the threshold current needed for phase transition of our fabricated PCM cell array is very low （only several μA）. An x-ray total dose radiation test is carried out on the PCM cell array and the results show that this kind of PCM cell has excellent total dose radiation tolerance with total dose up to 2 ×10^6 rad（Si）, which makes it attractive for space-based applications.     

侵彻环境下两种钨合金的细观响应特性

本文实验发现具有较大密度和较高速度的93W钨合金长杆模拟弹的穿靶深度反而比密度较小，速度较低的90W钨合金长杆弹的穿靶深度小．针对这一现象，本文从两种材料在侵彻环境下的细观响应特性的差异上给出了有实验根据的合理分析，结论是90W在侵彻环境下较易于形成绝热剪切带，从而在弹头部发生“自锐化”效应所致．     

Fe-V-N稀合金中空位复合体特性的研究(Ⅱ)

本文利用离散变分法,集团模型和三维数值弛豫技术,研究了Fe-V-N稀合金中V-N-空位复合体的几何构型,正电子湮没特性和电子结构。根据正电子湮没寿命实验的结果和总能量极小原理,确定了V和N在V-N-空位复合体中的最佳占据位置。分析了V-N-空位复合体的成键特性和电荷转移情况。 关键词：     

基片温度对坡莫合金薄膜结构和磁电阻的影响

用磁控溅射方法制备了系列坡莫合金Ni80Fe20薄膜。利用X射线衍射、扫描电子显微镜和原子力显徽镜分析了薄膜的结构、晶粒取向、薄膜厚度、截面结构和表面形态。用4点探测技术测量了薄膜的电阻和磁电阻。结果表明：随衬底温度的升高，晶粒明显长大。膜内的缺陷和应力显著减小，而且增强了薄膜晶粒的[111]择优取向。结果表明，薄膜电阻率显著减小，而磁电阻显著增大。