Synthesis of Cyanobenzaldehydes （m—,o—,p—）by Molecular oxygen Oxidation Methods

Cyanobenzaldehydes (m-,o-,p-) were synthesized by oxidation of corresponding tolunitriles with molecular oxygen,catalyzed by cobalt acetate and sodium bromide.     

脱铝超稳Y沸石的SiO2/Al2O3比与催化性能的研究

脱铝超稳Y沸石(简称DUSY)是八面沸石经脱铝改性后的固体酸催化材料,在石油化学工业和精细化学品合成中应用较广.我们曾报道了DUSY催化系列酯化反应,莰烯与乙酸的加成酯化反应[1],乙酸与β-苯乙醇的酯化反应[2],乙酸与烯丙醇的酯化反应[3],效果很好.克服了过去采用浓H2SO4作催化剂所带来的污染严重,设备腐蚀的问题,是具有应用前景的一类固体酸催化材料.谭志新等人曾报道α-蒎烯在固体超强酸上的异构化反应[4],王亚明等人报道了HMC-60催化α-蒎烯的异构化反应[5].与之相比较,用DUSY催化,其反应条件更温和.本文将DUSY的表面酸性与α-蒎烯异构反应相关联,探讨了硅铝比与催化性能的关系.     

阿齐霉素的伏安行为研究

在１．２ｍｏｌ／Ｌ ＮａＯＨ溶液中,阿齐霉素（ａｚｉｔｒｏｍｙｃｉｎ,简称ＡＺＭＣ）有一灵敏的还原伏安峰。当搅拌富集时间为１０s,扫速为５００ｍＶ／ｓ时其吸附伏 安溶出峰电位фp＝－１。３４Ｖ（ｖｓ．Ａｇ／ＡｇＣ１）。用线性扫描,计时库仑法,循环伏安及脉冲极谱等多种手段研究了该体系的伏安行为 和电极反应机理。实验表明该体系属于一有吸附性的不可逆过程,测得电极反应的电子转移数n＝２,体系的an＝１．１４     

羟基蒽醌衍生物中羟基质子的核磁共振研究

通过对23个羟基蒽醌衍生物的质子核磁共振研究, 观察了不同取代类型羟基的化学位移范围;讨论了酚羟基乙酰化对芳环质子的化学位移影响, 为羟基取代位置的确定及芳环质子谱线归属提供了某种判据.此外, 还用HMO 法探讨了各类取代羟基的氢键强度及羰基迫位仅有一个羟基的内氢键强度与给予原子电荷密度的关系.本文报道一系列新型冠醚N,N'-双取代-1,7-二氧杂-12-冠-4(1~6), N,N' -双取代-1, 7-二氮杂-15冠-5(7~10) 及N,N'-双取代-1,10-二氮杂-18-冠-6(11~14)的质谱. 借助联动扫描和去焦技术对它们的开裂机理作了详细探讨.     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

超细镍基催化剂上CH4-CO2重整反应的性能 Ⅱ.制备方法对催化性能及积碳性能的影响

采用溶胶－凝胶法和超临界干燥（ＳＣＤ）技术制备了超细二元ＮｉＯ－Ａｌ２Ｏ３和三元ＮｉＯ－Ｌａ２Ｏ３－Ａｌ２Ｏ３催化剂,并以浸渍超细氧化铝载体和普通氧化铝载体制得的二元和三元催化剂为对比,考察了不同制备方法对催化剂上ＣＨ４－ＣＯ２重整反应性能的影响。结果表明,超细催化剂表现出很高的高温催化活性、选择性和显著的抗积碳能力,即使不含助剂的超细二元催化剂也明显优于含镧助剂的负载三元催化剂,而含镧的超细三元     

多孔硅纳米材料的制备及在高能锂电池中的应用

多孔硅纳米材料具有巨大的比表面积,可调控的物理化学性质,在药物治疗、传感、能源储存与转化等领域拥有巨大的应用前景。尤其在高能量密度锂离子电池领域,多孔硅由于其丰富的孔道结构能有效释放充放电过程中硅体积变化带来的巨大应力以及大大地缩短锂离子传输距离,而引起了人们的广泛研究兴趣。但是,开发简便快速的方法来合成结构可调变的多孔硅纳米材料仍是当前研究的挑战。近年来,一些用来合成多孔硅纳米材料的方法已有报道。我们基于本课题组最近的研究进展和近年来相关文献,比较详细综述了近年来多孔硅纳米材料的制备方法以及重点关注其在高能锂电池领域的应用。最后,对多孔硅纳米材料的未来发展方向做了进一步的展望。     

以二甲亚砜水溶液为反应介质低温合成纳米级磷酸亚铁锂

采用二甲亚砜水溶液为反应介质, 在常压和108 ℃条件下, 经短时间的液相反应直接制备出橄榄石结构的纳米级LiFePO₄. IR分析表明, 液相法直接制得的LiFePO₄晶体结构中含有少量的Fe^3＋. 将液相直接制备的样品与少量葡萄糖混合后在600 ℃下焙烧3 h得到类球形的LiFePO₄/C材料. 电化学测试结果表明, 这种纳米级LiFePO₄/C材料在0.2 C 倍率下放电容量达到157.2 mAh/g, 并且具有较好的放电平台. 5 C和10 C放电容量仍能达到126.1和103.4 mAh/g, 且循环200次后容量没有明显衰减, 表现出优异的倍率放电特性和循环性能.