微乳液中球形及棒状SrTiO3纳米粒子的控制合成

以氢氧化锶和钛酸四丁酯为原料, 在水溶液/Triton X-100/环己烷/正己醇反相微乳液体系中制备了直径约为20～80 nm的钛酸锶球形纳米粒子和长约300～1200 nm、直径约为30～150 nm的钛酸锶纳米棒. 用XRD, ICP, TEM, SAED和SEM对样品的结构、成分和形貌进行了表征; 用DLS分析了样品的粒度分布. 结果显示, 水与表面活性剂的物质的量比(ω₀)、反应物浓度、陈化时间等因素都能影响钛酸锶纳米粒子的形貌和尺寸. 所得钛酸锶的锶钛物质的量比约为1.0, 粒度分布较窄, 为立方相单晶结构.     

Size control synthesis of sulfur doped titanium dioxide （anatase） nanoparticles, its optical property and its photo catalytic reactivity for CO2 ＋ H2O conversion and phenol degradation

Sulfur doped anatase TiO2 nanoparticles (3 nm−12 nm) were synthesized by the reaction of titanium tetrachloride, water and sulfuric acid with addition of 3M NaOH at room temperature. The electro-optical and photocatalytic properties of the synthesized sulfur doped TiO2 nanoparticles were studied along with Degussa commercial TiO2 particles (24 nm). The results show that band gap of TiO2 particles decreases from 3.31 to 3.25 eV and for that of commercial TiO2 to 3.2 eV when the particle sizes increased from 3 nm to 12 nm with increase in sulfur doping. The results of the photocatalytic activity under UV and sun radiation show maximum phenol conversion at the particle size of 4 nm at 4.80% S-doping. Similar results are obtained using UV energy for both phenol conversion and conversion of CO2+H2O in which formation of methanol, ethanol and proponal is observed. Production of methanol is also achieved on samples with a particle size of 8 and 12 nm and sulfur doping of 4.80% and 5.26%. For TiO2 particle of 4 nm without S doping, the production of methanol, ethanol and proponal was lower as compared to the S-doped particles. This is attributed to the combined electronic effect and band gap change, S dopant, specific surface area and the light source used.     

Controlled Synthesis of Sea-urchin-like ZnO Nanomaterials with the Aid of Ethylene Glycol Using a Solvothermal Method

Sea-urchin-like ZnO nanomaterials were successfully synthesized by decomposition of zinc acetate precursor in the presence of sodium hydroxide and ethylene glycol(EG) in an ethanol solution using a solvothermal method at 180 ℃ for 12 h.The crystalline phase and morphology of the resultant nanomaterials were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),selected-area electronic diffraction(SAED) and high-resolution electron microscopy(HRTEM).Interestingly,the sizes and prod length of the samples can be easily tuned by changing the amount of directing agent EG and keeping other reaction conditions unchangeable.On the basis of our experimental outcomes,EG-controlled-nucleation-growth formation mechanism was proposed to correspond for the sea-urchin-like ZnO growth processes.And the photoluminescence(PL) spectra of the as-selected samples were measured at room temperature,presenting two emission peaks centered at～388 and 480 nm.     

北五味子的液相色谱指纹图谱的建立

利用反相高效液相色谱法建立中药材北五味子的指纹图谱,为科学评价及有效控制北五味子质量提供了新方法。实验分析了10个不同产地的北五味子样品,采用国家食品药品监督管理局推荐的“中药色谱指纹图谱相似度评价系统(2004 A版)”计算处理,建立了由26个指纹峰和19个共有峰组成的北五味子指纹图谱,确定了5个主要的指纹峰。通过夹角余弦法和相关系数法计算了北五味子10个样本与指纹图谱间的相似度,得到了满意的结果。所建立的指纹图谱可以用来区别不同产地北五味子药材的优劣,为进一步控制北五味子的质量提供依据。     

基于定量指纹图谱技术的中药质量控制

定量指纹图谱技术是中药指纹图谱技术与多指标成分定量分析相结合的中药质量控制模式。定量指纹图谱技术的发展包括定量组分的制备、过程控制的指纹图谱技术和产品含量测定3个主要部分。本文以丹参为例,通过水提、醇沉、过膜、大孔树脂分离和工业色谱分离5个工艺流程制备了丹参定量组分,对各个工艺步骤以指纹图谱技术考察其稳定性和重复性。对丹参定量组分中的原儿茶醛、迷迭香酸、丹酚酸B 3个成分进行含量测定。3个成分的含量总和大于50%。定量组分的制备以现有的活性成分为目标,经过去粗存精的工艺过程,其质量标准得到了有效的提高。     

Three-dimensionally ordered macro-porous Pt/TiO2 catalyst used for water-gas shift reaction

Three-dimensionally ordered macro-porous (3DOM) Pt/TiO2 catalysts were prepared by template and impregna-tion methods, and the resultant samples were characterized by using TG-DTA, XRD, SEM, TEM, and TPR techniques. The catalytic performance for water-gas shift (WGS) reaction was tested, and the influences of some conditions, such as reduction temperature of catalysts, the amount of Pt loadings and space velocity on catalytic performance were investigated. It was shown that Pt particles were homogeneously dispersed on 3DOM TiO2. The reduction of TiO2 surface was important for the catalyticperformance. The activity test results showed that the 3DOM Pt/TiO2 catalysts exhibited very good catalytic performance for WGS reaction even at high space velocity, which was owing to the better mass transfer of 3DOM porous structure besides the high intrinsic activity of Pt/TiO2.     

费托合成钴基催化剂的研究进展

 费托合成油技术是煤炭、天然气等含碳资源清洁优化利用的重要途径, 其关键问题之一是催化剂选择性的调控, 即抑制甲烷生成和提高馏分油含量. 近 10 年来, 中国科学院山西煤炭化学研究所系统地开展了钴基费托合成催化剂及制备放大的工程基础研究, 包括钴分散度、还原度与甲烷生成之间的关系, 载体表面疏水性对催化剂性能的影响, 以及采用孔道限域等手段初步实现了产物的选择性调控. 同时, 初步阐明了甲烷生成的结构基础, 并指明了新型馏分油催化剂研发方向. 在此基础上, 研制了新型钴基催化剂, 其具有低甲烷选择性、高重质烃选择性和良好稳定性的特点. 目前, 对 I 型催化剂完成了实验室稳定性验证并实现了工业示范; 对 II 型催化剂 (甲烷选择性约 2%~3%) 完成了稳定性验证.     

基于埃洛石的载药凝胶小球的制备及性能研究

采用离子凝胶法制备了一种新的壳聚糖-g-聚丙烯酸/埃洛石/海藻酸钠(CTS-g-PAA/HT/SA)凝胶小球。研究了HT含量对载药凝胶小球的溶胀性、包封效率和释放性能等的影响;同时也讨论了凝胶小球的pH敏感性和双氯芬酸钠(DS)的释放行为。结果表明:HT含量对载药凝胶小球的溶胀率、包封效率和累积释放率有明显的影响,在HT含量为30%时,溶胀率、包封效率和12h累积释放率分别达到32.84%、91.07%和100%;另外,载药凝胶小球具有较好的pH敏感性;在pH=2.1的释放介质中DS几乎不释放,而在pH=6.8的释放介质中缓慢释放;DS释药机理为溶胀控释。     

1,10-邻菲咯啉-5,6-二酮制备反应中副产物的形成与控制

由1,10-邻菲咯啉合成1,10-邻菲咯啉-5,6-二酮反应的副产物的形成与控制研究表明,1,10-邻菲咯啉在5,6位二酮化反应中的副反应产物及主产物分离时产生的副产物均为4,5-二氮杂芴-9-酮,二酮化反应条件(包括作为氧化剂的强混合酸H2SO4/HNO3的加入量、时间和温度)和主产物分离时体系的酸度对副产物的形成有重要影响,优化了二酮化反应条件和产物分离时的体系pH控制范围。在此优化条件下,可有效控制副产物的形成,使主产物1,10-邻菲咯啉-5,6-二酮的收率达到92%以上。     

谷氨酸低分子量有机凝胶的药物控制释放行为

低分子量的有机胶凝剂组装形成的有机凝胶可应用于药物缓释体系.本研究中,使用亲水的钙黄绿素和疏水的布洛芬为模型分子,研究其在谷氨酸衍生物有机凝胶体系中的缓释行为.研究表明,与药物分子与有机胶凝剂简单混合的体系相比,亲水或疏水的药物分子在有机凝胶体系中的释放速度显著减缓.SEM的研究发现药物粒子嵌入在有机凝胶的三维网络中,因此,有机凝胶的三维网络结构可认为是实现药物缓慢释放的基质,药物分子从网络中的释放受限导致了其从有机凝胶中的缓释行为.