基于BiOCl-Fe2O3@TiO2介孔复合材料的光电化学合成氨性能研究

传统合成氨工艺存在能耗高、污染严重的问题. 因此, 高效、低能耗绿色合成氨工艺的开发迫在眉睫. 光电化学以H₂O和N₂为原料, 可以在太阳光驱动下, 在常温常压条件下实现氨的合成, 因而受到广泛重视. 但总的来说, 效率和产率都达不到实际要求. 新型高效催化剂及工艺的开发是提高合成氨产率及效率的关键. 非贵金属催化剂具备成本低、来源广泛、可操作性强的优势, 有利于光电化学合成氨的产业化. 本实验采用溶胶凝胶结合原位热裂解的方法制备了分散性好、结构均匀的BiOCl-Fe₂O₃@TiO₂复合材料, 对其物相、微观结构、表面状态、光学性能、电学性能等方面进行了系统表征, 并探究了该材料在常温常压下光电化学合成氨的催化活性. 结果表明, 同纯介孔TiO₂相比_, BiOCl-Fe₂O₃@TiO₂的吸收带隙变窄, 可见光吸收能力增强, 光生载流子的利用率增加, 光电合成氨的产率提升了7倍, 且BiOCl-Fe₂O₃@TiO₂显示了优异的化学稳定性. 本研究工作为绿色合成氨催化材料及工艺设计提供了新思路.     

通过控制陷阱分布实现高灵敏度窄带近红外响应有机光探测器

近红外(NIR)窄带光电探测在机器视觉、医学检测、智能通信等领域具有重要应用.本文提出了一种基于激子解离窄化机制的改进型层级器件结构,以实现响应峰值为940 nm的近红外窄带有机光电探测器(OPD).系统研究表明,通过调节器件内部的陷阱态密度分布,可以有效地提高窄带探测器的外量子效率(EQE)峰值.最终,基于双激子耗散...     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

电活性分子L-B膜修饰CdSe薄膜电极的光电化学研究

用电活性分子——硬脂酸二茂铁酯L-B膜修饰了薄膜CdSe电极,在单色光650nm光照下用循环伏安法研究修饰的薄膜电极的光电化学性能。研究结果指出经多层L-B膜修饰后,薄膜CdSe电极的,I-V性能和光稳定性都有明显改善。用界面能级关系讨论了硬脂酸二茂铁酯L-B膜在光照的CdSe薄膜/Fe(CN)₆^4-溶液界面起传递电荷的中介作用,加速了界面的电荷转移。     

主链掺杂氧原子聚硅烷的研究进展

介绍了一类新型有机硅聚合物主链掺杂氧原子聚硅烷的合成与性质.该类聚合物是通过氧原子有规律地插入聚硅烷主链,形成具有氧杂低聚硅烷的序列结构(-[(SiMe2)mO]n-).聚合物的主链呈现了聚硅烷以及聚硅氧烷的杂化体结构.通过对此类聚合物性质的研究,能够获得有关此类聚合物行为的知识,从而进一步促进人们对聚硅烷和聚硅氧烷化学性质的了解.总结了此类聚合物的两类有效合成方法:通过α,ω-二功能基封端的线性硅烷低聚体缩聚反应法以及氧杂环硅烷单体的开环聚合反应法,包括氧杂环硅烷单体的开环聚合平衡和反应机理.讨论了此类聚合物的表征、热稳定性及其结构形态.在结论部分展望了此类聚合物的预期应用前景.     

有机金属聚合物/多酸纳米杂化LB膜的制备与光电性质研究

以含有共轭大π键的有机金属聚合物(OMP)作有机组分, 以Keggin结构和Dawson结构钨(钼)磷杂多酸作无机组分, 以十八胺为辅助成膜剂, 用LB技术制备了3种新型有机金属聚合物/十八铵/杂多阴离子OMP/ODA/HPA (HPA＝PMo₁₂, PW₁₂, P₂Mo₁₈)杂化LB膜. 用π-A曲线﹑UV-vis吸收光谱﹑荧光光谱﹑原子力显微镜(AFM)﹑扫描隧道显微镜(STM)和表面光电压谱(SPS)对标题LB膜的成膜性能及光电性质进行了研究, 结果表明标题杂化LB膜的崩溃压为26.8 mN/m, 在可见光区有较强的光电压响应, 并有好的发光性质. 当电压为±8.0 V时, 隧道电流是－0.1～－2.3 nA.     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

YbB6的能带结构和光电导率谱的解析

用密度泛函（GGA＋U）方法研究YbB6晶体的电子结构。采用FLAPW方法进行计算,获得了比较精确的能带结构信息。分析了YbB6能带结构的特征与Yb-B6簇间成键情况的联系。在此基础上计算YbB6的反射率、介电函数、光电导率和能量损失函数等光学常数,结果与实验值符合比较好。对其光电导率（实部）和能量损失函数谱进行详细分析,对谱峰作出指认,阐明了各谱峰与能带间电子跃迁的联系,证实了前人对谱峰所作经验指认的合理部分,补充和纠正了前人经验指认的不足和不准确之处。     

巯基卟啉自组装膜的制备及应用研究进展

详细介绍了巯基卟啉自组装膜的几种制备方法,评述了不同制备方法的优缺点;对卟啉自组装膜在电荷转移、分子氧电催化、分子光电器件等领域的研究进展进行了评述,引用文献54篇。     

PAD在HPLC分析长春胺中的应用

本文报道用光电二极管阵列检测器(PAD)鉴定小蔓和大蔓长春花中的长春胺。并对经典制备方法得到的长春胺样品进行了纯度判断。利用建立的紫外光谱数据库对长春胺中的分解产物进行光谱检索和鉴定。测定了长春胺的稳定性。