聚丙烯-聚乙烯嵌段共聚物的分子结构及性能的研究

本工作用核磁共振(~(13)C-NMR)、示差扫描量热(DSC)、动态力学分析(DMA)和扫描电子显微镜(SEM)等技术研究了将丙烯、乙烯单体两步分段共聚、预期为聚丙烯-聚乙烯嵌段共聚物的合成物(简称为聚丙烯-聚乙烯嵌段共聚物或嵌段共聚物)。结果表明,在嵌段共聚物中含有一定量的、能为正庚烷抽提出来的乙丙无规共聚物(EPR);分段共聚的产物并非预想的PP-b-PE两嵌段共聚物,而是含有多种组分的共混物;形态表征的结果表明了嵌段共聚物为多相体系,EPR和PE形成分散相以球形无规分布于PP基体中。     

含有4,4′-双(甲基丙烯酰胺基)偶氮苯水凝胶的合成及其在结肠位药物释放的动物实验

合成了不同链长的甲基丙烯酸酯、甲基丙烯酰胺及丙烯酸与4,4′-双(甲基丙烯酰胺基)偶氮苯交联共聚的功能凝胶.三维网络结构通过压缩弹性模量、有效交联密度及聚合物与溶剂间的相互作用参数进行了表征.主要研究了这类凝胶在pH2.2和pH7.4的缓冲溶液的平衡溶胀特性及其偶氮交联基团在体内的降解行为,并讨论了其降解机制.凝胶在胃部的性能稳定,既不发生溶胀,亦不发生降解;但在盲肠内偶氮交联基因可发生降解.其降解率与凝胶的平衡溶胀程度有一个很好的关联:交联程度、疏水基侧链的长度及含量对凝胶溶胀行为的影响结果与这些因素对偶氮交联基团体内降解的影响结果完全一致.通过调节这些因素不仅可以控制凝胶的溶胀程度,而且可以控制偶氮交联基团在体内的降解行为.     

聚丙烯表面接枝PNIPAAm膜Ⅰ.光接枝反应和表面形态结构研究

以氧杂蒽酮或二苯甲酮为引发剂 ,通过紫外光引发表面接枝聚合的方法在聚丙烯薄膜表面引入了具有温度敏感特性的聚异丙基丙烯酰胺 (PNIPAAm)接枝聚合物层 .提高紫外光强度和接枝反应温度均有利于接枝率增大 ,而单体浓度对接枝率的影响存在最佳值 ,为 0 1 8mol L .在引发剂预浸渍引发接枝和休眠基引发接枝这两种方式中 ,后者能够实现更高的接枝率 .红外光谱 (FTIR)、X射线光电子能谱化学分析 (ESCA)和扫描电子显微镜 (SEM)等对接枝层组成的表征结果证实了接枝层的存在 .在不同温度下 ,接枝膜的FTIR谱图中酰胺I带和酰胺II带特征吸收峰发生位移 ,表明它具有温度敏感特性 .同时 ,SEM研究发现由于接枝膜的温度敏感特性而导致的球状表面形态结构     

超分子三维氢键网络：{[Cu(phen)3](SO4)(H3PCA)2(8H2O)}的晶体结构

A new complex， {[Cu(phen)₃](SO₄)(H₃PCA)₂(8H₂O)}， was synthesized and structurally characterized by single-crystal X-ray analysis. The complex is composed of copper cations， sulfate anions， 1，10-phenanthroline， protocatechuic acid and lattice water molecules. The structure of H₃PCA， SO₄^2- and waters comprises packing of anionic three-dimensional network by hydrogen bonds with cavities. The complex can be considered as a model of host/guest supramolecule. The three-dimensional hydrogen-bonding network is the host species. The Cu(phen)₃²⁺ cations， guest species， occupied the cavities of the host. And the results demonstrate that the form of protocatechuic acid at pH< 1 should be free ligand. CCDC： 191733.     

氯化锂为添加剂制得的疏水聚偏氟乙烯不对称微孔膜的形态结构及其膜蒸馏性能

结合膜的形态结构研究了以 LiCl为添加剂制得的疏水 PVDF膜的膜蒸馏性能。与来用水溶液高分子添加剂制得的PVDF微孔膜相比,膜蒸馏性能有了较大提高,尤其具有更高的截留率。制得的微孔膜的蒸馏通量已接近商品膜的膜蒸馏通量,表明以LiCl为添加剂制得的PVDF疏水微孔膜是一种适用于膜蒸馏的较理想的疏水微孔膜。     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

基于小波变换模极大法的聚乙烯催化剂表面分形分析

运用分形和小波相结合的方法研究负载型聚乙烯催化剂(简称催化剂)表面形态. 采用小波变换模极大(WTMM)法提取了催化剂表面多尺度边缘(细节)图像, 用分形和多重分形方法研究了各尺度边缘图像中边缘点的分布情况, 并用基于小波变换模极大的多重分形谱法讨论了催化剂边缘点奇异强度的分布状况. 研究结果表明, 催化剂的较小尺度边缘图像的分维和多重分形谱可以与催化剂的表面形态和活性进行较好的关联; 高活性催化剂的基于WTMM的多重分形谱的奇异强度跨度更宽, 拥有较多具有较高奇异强度的奇异点. 基于小波和分形对催化剂表面形态的研究, 发挥了小波和分形各自的优点, 为研究物体表面形态提供了思路.     

烟草三维荧光特征和品质评吸的关系

研究不同品种烟草石油醚冷萃取物的三维荧光光谱，包括烟草所共在的荧光性质和各自的荧光特性，寻找它们与烟草香味，颈头等吃味之间的关系，选择合适的量值指标，为烟草品质的 观感官评估提供了一个实用的对照方法。