Oxygen nonstoichiometry (δ) of TiO2−δ-revisited

Oxygen nonstoichiometry (δ) of “undoped” polycrystalline TiO_2−δ has been measured as a function of oxygen partial pressure in the widest ever examined range of 10^-18?P_O2/atm?10^-1 at elevated temperatures (1073?T/K?1473) by thermogravimetry and coulometric titrometry combined and compared with all the reported values. Isothermal variation of nonstoichiometry against P_O2 is explained with a defect model involving quadruply ionized titanium interstitials, electrons, holes, and unidentified acceptors which may be background impurity acceptors or cation vacancies. The equilibrium constants for intrinsic electronic excitation reaction and redox reaction are determined from the nonstoichiometry measured and compared exhaustively with all the reported values. The relative partial molar enthalpy and entropy of oxygen are evaluated as functions of nonstoichiometry and the inner workings of their variations discussed.     

引入δ-内酯疏水取代烷基结构实现聚对二氧环己酮的性能调控

可反复化学循环、可生物降解的聚对二氧环己酮(PPDO),存在水解降解快等问题,不利于其储存和使用.基于此,本文通过将不同正烷基取代的δ-内酯(RVL)分别与对二氧环己酮(PDO)在磷酸二苯酯催化下本体共聚,高效地合成了3种结构和组分可控的PPDO基共聚物(PDRVL).通过热重分析(TGA)、差示扫描量热分析(DSC)...     

CeO2负载的PdO与Ce1‒x Pd x O2‒δ 物种的甲烷催化燃烧性能

通过调控Pd前驱物在CeO₂上的沉积方式, 分别制备了以PdO和离子态的Ce_1?x Pd _x O_2?δ 物种为主的 Pd/CeO₂催化剂, 并采用X射线光电子能谱(XPS)和拉曼(Raman)光谱确证了这两种Pd物种的存在. 氧气程序升温脱附(O₂-TPD)和氢气程序升温还原(H₂-TPR)的表征结果显示, 相比于与载体相互作用较弱的PdO物种, 与CeO₂相互作用较强的Ce_1?x Pd _x O_2?δ 物种具有更加稳定的Pd—O键. 催化剂的甲烷燃烧反应起燃活性测试结果显示, 以PdO物种为主的催化剂表现出了良好的低温催化性能, 在原料气配比为1%CH₄/4%O₂-Ar, 空速为60000 mL·{\mathrm{g}}_{\mathrm{c}\mathrm{a}\mathrm{t}}^{-\mathrm{1}}·h^?1的条件下, T₁₀和T₉₀分别为275和367 ℃, 而两种以Ce_1?x Pd _x O_2?δ 物种为主的催化剂的T₁₀均超过420 ℃. 催化剂的甲烷程序升温还原(CH₄-TPR)表征结果表明, 在升温过程中只有当PdO或Ce_1?x Pd _x O_2?δ 物种被CH₄还原后, 催化活性才开始上升. 由于PdO物种的Pd—O键强度较弱, 有利于Pd物种上的晶格氧在较低温度下参与CH₄的氧化过程. 而Ce_1?x Pd _x O_2?δ 物种的Pd—O键较稳定, 且在反应条件下离子态Pd²⁺与反应体系中氧物种的作用较强, 进而抑制了其与CH₄的反应, 因此反应的起燃温度较高. 以γ-Al₂O₃为载体采用相同的方法制备了Pd/γ-Al₂O₃催化剂, 相关的表征结果进一步证实, 与载体相互作用较弱的PdO物种更容易被CH₄还原, 进而具有较高的催化活性. 据此可以认为Pd/CeO₂上氧化态的Pd物种被CH₄的还原性能是决定其甲烷催化燃烧反应活性的重要因素之一.     

掺Fe~(3+) A-TiO_2的合成及其对酸性红B的光催化降解性能

以硫酸氧钛和FeCl_3·6H_2O为主要原料,采用水热法合成了掺Fe~(3+)的纯锐钛矿型A-TiO_2催化剂,其结构经FT-IR和X-射线衍射表征。以波长365nm紫外灯为光源,酸性红B为降解对象,研究了其光催化降解性能。实验结果表明:掺Fe~(3+)有利于提高TiO_2的催化性能,当掺Fe~(3+)量为0.2mol%时,A-TiO_2的光催化性能最强;当掺Fe~(3+)A-TiO_2投放量为400mg·L~(-1),于20℃降解时间40min,对10mg·L~(-1)酸性红B溶液(pH=5)的降解率最大(95.11%)。     

Notch-δ-doped InP Gunn diodes for low-THz band applications

The viability of the indium phosphide (InP) Gunn diode as a source for low-THz band applications is analyzed based on a notch-δ-doped structure using the Monte Carlo modeling. The presence of the δ-doped layer could enhance the current harmonic amplitude (A₀) and the fundamental operating frequency (f₀) of the InP Gunn diode beyond 300 ​GHz as compared with the conventional notch-doped structure for a 600-nm length device. With its superior electron transport properties, the notch-δ-doped InP Gunn diodes outperform the corresponding gallium arsenide (GaAs) diodes with up to 1.35 times higher in f₀ and 2.4 times larger in A₀ under DC biases. An optimized InP notch-δ-doped structure is estimated to be capable of generating 0.32-W radio-frequency (RF) power at 361 ​GHz. The Monte Carlo simulations predict a reduction of 44% in RF power, when the device temperature is increased from 300 ​K to 500 ​K; however, its operating frequency lies at 280 ​GHz which is within the low-THz band. This shows that the notch-δ-doped InP Gunn diode is a highly promising signal source for low-THz sensors, which are in a high demand in the autonomous vehicle industry.     

δ~2-加速的Broyden计算格式

本文对于求解非线性方程组 F (x) =0的 Broyden秩 1第二种方法的计算格式进行修正 ,在算法实现过程中使用了δ2 -加速技巧 ,从而大大提高了算法的收敛速度 .     

高温超导体低温、高压下的物理性质的研究

 在3~20 GPa压力范围内，测量了含氧量较低的YBa₂Cu₃O_7-δ（δ=0.46）单晶压力增强效应（dT_c/dp=4.9KGPa^-1）；YBa₂Cu₃O₇（T_c0=90 K）单晶在压力下临界电流密度随压力变化；外磁场H=30 kO_e时，T_c与磁场、压力关系；压力达16.5 GPa下，Bi₂Sr₂CaCu₂O_x单晶T_c(p)关系（dT_c/dp=-0.4 KGPa^-1）。发现Y系高温超导体的温度压力导数dT_c/dp与T_c0中间呈dT_c/dp=b-mT_c0线性关系（b、m为常数）。结合压力下Y系超导体结构相变和含氧量对T_c影响，分析这类超导体T_c有很强的正压力效应的原因。把实验结果同几种超导电性微观理论模型进行了分析和比较。     

带间共振隧穿二极管(RITD)

带间共振隧穿二极管(RITD)是导带与价带间发生共振隧穿的两端器件,其特点是启始电压VT和峰值电压Vp较低,电流峰谷比PVCR较大。在导出RITD物理模型和其电流密度方程的基础上重点介绍了InAs/AlSb/GaSbⅡ类异质结RITD、n+InAlAs/InGaAs/InAlAs/In-GaAs/p+InAlAsp-n结双势阱Ⅰ类RITD以及δ掺杂RITD三种RITD的器件结构、材料结构、工作原理、器件特性和参数等,并对这三种RITD的特点进行了比较和讨论。     

GdBaCo2O5+δ体系的滞弹性内耗研究

GdBaCo₂O_5+δ体系的低频内耗研究表明：体系中存在一个由额外氧运动引起的弛豫内耗峰；额外氧δ对这个弛豫内耗峰的大小、峰形及峰位有较大影响，反映了额外氧状态随δ而变化.当δ=0.005，体系中额外氧含量很少而接近零时，相应的内耗峰消失；δ达到一定数量后，出现弛豫内耗峰.由δ=0.278，0.407，0.421，0.515样品的弛豫内耗峰分析可得到体系随δ不同存在着三种不同的额外氧形态.此外，δ=0.421及0.515的样品在360K附近存在一个相变内耗峰，它对应着体系中的金属—绝缘体转变. 关键词： 2O_5+δ')" href="#">GdBaCo₂O_5+δ 额外氧 内耗峰     

13C and 15N Abundances in the Sediment Core (VER 92/1-St-10-GC2) from Northern Lake Baikal

Abstract

Carbon and nitrogen stable isotope compositions of organic matter, TOC/TN ratio, and manganese concentration in a sediment core that was collected in northern part of Lake Baikal (VER92ST10-GC2, water depth at 922 m, about 3 m long) were investigated to elucidate the origin of the sedimentary organic matter and its associated environmental factors.

The sediment core was composed of mainly two parts: turbidite sections and other sections. Constant δ¹³C and δ¹⁵N values of the turbidite sections were observed (- 26.8 ±0.2 ‰ for δ¹³C and 3.2 ± 0.1 ‰ for δ¹⁵N) throughout the core. The higher δ¹³C in turbidite sections (about - 27 ‰) than that of the other sections (- 31 to - 29 ‰) was clearly observed, and δ¹⁵N was different between turbidite sections (about 3‰) and other sections (3 to 5 ‰). δ¹³C of other sections was close to that of pelagic phytoplankton, indicating that sediment other than turbidite sections is composed of autochthonous components. The variation of stable isotopes in other sections may be possibly caused by the changes in either phytoplankton growth rate or contribution ratios of terrestrial to aquatic plants for δ¹³C. Either denitrification or fluctuation of δ¹⁵N in pelagic phytoplankton can be the cause of variable δ¹⁵N in other sections.